commit ad9c990a2c6aa197b1e5c68ea2870062e68e0b08
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon Mar 21 12:49:43 2011 -0700
Linux 2.6.33.8
commit 99b0ee6c642cc2d03fc38dab8e64ae6ef468d3fe
Author: Tilman Schmidt <tilman@imap.cc>
Date: Mon Jul 5 14:18:27 2010 +0000
isdn: avoid calling tty_ldisc_flush() in atomic context
commit bc10f96757bd6ab3721510df8defa8f21c32f974 upstream.
Remove the call to tty_ldisc_flush() from the RESULT_NO_CARRIER
branch of isdn_tty_modem_result(), as already proposed in commit
00409bb045887ec5e7b9e351bc080c38ab6bfd33.
This avoids a "sleeping function called from invalid context" BUG
when the hardware driver calls the statcallb() callback with
command==ISDN_STAT_DHUP in atomic context, which in turn calls
isdn_tty_modem_result(RESULT_NO_CARRIER, ~), and from there,
tty_ldisc_flush() which may sleep.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b8f5defbad63b47b8a43e4e6cc6089b93049f87f
Author: Shaohua Li <shaohua.li@intel.com>
Date: Wed Mar 16 11:37:29 2011 +0800
x86: Flush TLB if PGD entry is changed in i386 PAE mode
commit 4981d01eada5354d81c8929d5b2836829ba3df7b upstream.
According to intel CPU manual, every time PGD entry is changed in i386 PAE
mode, we need do a full TLB flush. Current code follows this and there is
comment for this too in the code.
But current code misses the multi-threaded case. A changed page table
might be used by several CPUs, every such CPU should flush TLB. Usually
this isn't a problem, because we prepopulate all PGD entries at process
fork. But when the process does munmap and follows new mmap, this issue
will be triggered.
When it happens, some CPUs keep doing page faults:
http://marc.info/?l=linux-kernel&m=129915020508238&w=2
Reported-by: Yasunori Goto<y-goto@jp.fujitsu.com>
Tested-by: Yasunori Goto<y-goto@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Mallick Asit K <asit.k.mallick@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm <linux-mm@kvack.org>
LKML-Reference: <1300246649.2337.95.camel@sli10-conroe>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit dae148953f37229ca7be1a80d8c9584792d990b2
Author: Milton Miller <miltonm@bga.com>
Date: Tue Mar 15 13:27:16 2011 -0600
call_function_many: add missing ordering
commit 45a5791920ae643eafc02e2eedef1a58e341b736 upstream.
Paul McKenney's review pointed out two problems with the barriers in the
2.6.38 update to the smp call function many code.
First, a barrier that would force the func and info members of data to
be visible before their consumption in the interrupt handler was
missing. This can be solved by adding a smp_wmb between setting the
func and info members and setting setting the cpumask; this will pair
with the existing and required smp_rmb ordering the cpumask read before
the read of refs. This placement avoids the need a second smp_rmb in
the interrupt handler which would be executed on each of the N cpus
executing the call request. (I was thinking this barrier was present
but was not).
Second, the previous write to refs (establishing the zero that we the
interrupt handler was testing from all cpus) was performed by a third
party cpu. This would invoke transitivity which, as a recient or
concurrent addition to memory-barriers.txt now explicitly states, would
require a full smp_mb().
However, we know the cpumask will only be set by one cpu (the data
owner) and any preivous iteration of the mask would have cleared by the
reading cpu. By redundantly writing refs to 0 on the owning cpu before
the smp_wmb, the write to refs will follow the same path as the writes
that set the cpumask, which in turn allows us to keep the barrier in the
interrupt handler a smp_rmb instead of promoting it to a smp_mb (which
will be be executed by N cpus for each of the possible M elements on the
list).
I moved and expanded the comment about our (ab)use of the rcu list
primitives for the concurrent walk earlier into this function. I
considered moving the first two paragraphs to the queue list head and
lock, but felt it would have been too disconected from the code.
Cc: Paul McKinney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9b1bd836a0acdd1d939417017535d37cfaf0e6d0
Author: Milton Miller <miltonm@bga.com>
Date: Tue Mar 15 13:27:16 2011 -0600
call_function_many: fix list delete vs add race
commit e6cd1e07a185d5f9b0aa75e020df02d3c1c44940 upstream.
Peter pointed out there was nothing preventing the list_del_rcu in
smp_call_function_interrupt from running before the list_add_rcu in
smp_call_function_many.
Fix this by not setting refs until we have gotten the lock for the list.
Take advantage of the wmb in list_add_rcu to save an explicit additional
one.
I tried to force this race with a udelay before the lock & list_add and
by mixing all 64 online cpus with just 3 random cpus in the mask, but
was unsuccessful. Still, inspection shows a valid race, and the fix is
a extension of the existing protection window in the current code.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9cedf78402729da0d3662ee7c695ac3f232c4f43
Author: Eric Sandeen <sandeen@redhat.com>
Date: Fri Mar 4 16:04:08 2011 -0600
ext3: Always set dx_node's fake_dirent explicitly.
commit d7433142b63d727b5a217c37b1a1468b116a9771 upstream.
(crossport of 1f7bebb9e911d870fa8f997ddff838e82b5715ea
by Andreas Schlick <schlick@lavabit.com>)
When ext3_dx_add_entry() has to split an index node, it has to ensure that
name_len of dx_node's fake_dirent is also zero, because otherwise e2fsck
won't recognise it as an intermediate htree node and consider the htree to
be corrupted.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9008aa5b68fe409f419c4404de3fb36d43abbe39
Author: Anton Blanchard <anton@samba.org>
Date: Wed Mar 9 14:38:42 2011 +1100
perf, powerpc: Handle events that raise an exception without overflowing
commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 upstream.
Events on POWER7 can roll back if a speculative event doesn't
eventually complete. Unfortunately in some rare cases they will
raise a performance monitor exception. We need to catch this to
ensure we reset the PMC. In all cases the PMC will be 256 or less
cycles from overflow.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110309143842.6c22845e@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 585f09f8bfb60e2b093da4fc7d6078dd8e161bb4
Author: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Tue Mar 15 19:56:30 2011 -0400
SUNRPC: Ensure we always run the tk_callback before tk_action
commit e020c6800c9621a77223bf2c1ff68180e41e8ebf upstream.
This fixes a race in which the task->tk_callback() puts the rpc_task
to sleep, setting a new callback. Under certain circumstances, the current
code may end up executing the task->tk_action before it gets round to the
callback.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 314877d903f32978fc0fbd7eb335c044c9887c27
Author: Joseph Gruher <joseph.r.gruher@intel.com>
Date: Wed Jan 5 16:00:21 2011 -0500
scsi_dh_alua: fix deadlock in stpg_endio
commit ed0f36bc5719b25659b637f80ceea85494b84502 upstream.
The use of blk_execute_rq_nowait() implies __blk_put_request() is needed
in stpg_endio() rather than blk_put_request() -- blk_finish_request() is
called with queue lock already held.
Signed-off-by: Joseph Gruher <joseph.r.gruher@intel.com>
Signed-off-by: Ilgu Hong <ilgu.hong@promise.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0fa74a5c1ce6166671879098666a6b9caa1c8af4
Author: Przemyslaw Bruski <pbruskispam@op.pl>
Date: Sun Mar 13 16:18:58 2011 +0100
ALSA: ctxfi - Clear input settings before initialization
commit efed5f26664f93991c929d5bb343e65f900d72bc upstream.
Clear input settings before initialization.
Signed-off-by: Przemyslaw Bruski <pbruskispam@op.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 38243420f101167d625b7f2d3a385a396de4b468
Author: Przemyslaw Bruski <pbruskispam@op.pl>
Date: Sun Mar 13 16:18:57 2011 +0100
ALSA: ctxfi - Fix SPDIF status retrieval
commit f164753a263bfd2daaf3e0273b179de7e099c57d upstream.
SDPIF status retrieval always returned the default settings instead of
the actual ones.
Signed-off-by: Przemyslaw Bruski <pbruskispam@op.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 89b0dcd2a7a11ac324c7bdf15bb15a084c3434ef
Author: Przemyslaw Bruski <pbruskispam@op.pl>
Date: Sun Mar 13 16:18:56 2011 +0100
ALSA: ctxfi - Fix incorrect SPDIF status bit mask
commit 4c1847e884efddcc3ede371f7839e5e65b25c34d upstream.
SPDIF status mask creation was incorrect.
Signed-off-by: Przemyslaw Bruski <pbruskispam@op.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit db79cbf24f8d161f284dd9e8697ead9a002b3e5e
Author: Ben Hutchings <bhutchings@solarflare.com>
Date: Thu Jan 13 19:47:56 2011 +0000
PCI: sysfs: Fix failure path for addition of "vpd" attribute
commit 0f12a4e29368a9476076515881d9ef4e5876c6e2 upstream.
Commit 280c73d ("PCI: centralize the capabilities code in
pci-sysfs.c") changed the initialisation of the "rom" and "vpd"
attributes, and made the failure path for the "vpd" attribute
incorrect. We must free the new attribute structure (attr), but
instead we currently free dev->vpd->attr. That will normally be NULL,
resulting in a memory leak, but it might be a stale pointer, resulting
in a double-free.
Found by inspection; compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1078c7bf019fed9537eebbf7e84a402ba4a59dcb
Author: Jiri Slaby <jslaby@suse.cz>
Date: Mon Feb 28 10:45:10 2011 +0100
PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICH
commit 87e3dc3855430bd254370afc79f2ed92250f5b7c upstream.
Some broken BIOSes on ICH4 chipset report an ACPI region which is in
conflict with legacy IDE ports when ACPI is disabled. Even though the
regions overlap, IDE ports are working correctly (we cannot find out
the decoding rules on chipsets).
So the only problem is the reported region itself, if we don't reserve
the region in the quirk everything works as expected.
This patch avoids reserving any quirk regions below PCIBIOS_MIN_IO
which is 0x1000. Some regions might be (and are by a fast google
query) below this border, but the only difference is that they won't
be reserved anymore. They should still work though the same as before.
The conflicts look like (1f.0 is bridge, 1f.1 is IDE ctrl):
pci 0000:00:1f.1: address space collision: [io 0x0170-0x0177] conflicts with 0000:00:1f.0 [io 0x0100-0x017f]
At 0x0100 a 128 bytes long ACPI region is reported in the quirk for
ICH4. ata_piix then fails to find disks because the IDE legacy ports
are zeroed:
ata_piix 0000:00:1f.1: device not available (can't reserve [io 0x0000-0x0007])
References: https://bugzilla.novell.com/show_bug.cgi?id=558740
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1fed17a3f1736f5396a951dd01ebd58adf43208f
Author: Jiri Slaby <jslaby@suse.cz>
Date: Mon Feb 28 10:45:09 2011 +0100
PCI: add more checking to ICH region quirks
commit cdb9755849fbaf2bb9c0a009ba5baa817a0f152d upstream.
Per ICH4 and ICH6 specs, ACPI and GPIO regions are valid iff ACPI_EN
and GPIO_EN bits are set to 1. Add checks for these bits into the
quirks prior to the region creation.
While at it, name the constants by macros.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ea5b3ecf8f709833067b392afc0a40cc510bb668
Author: Brandeburg, Jesse <jesse.brandeburg@intel.com>
Date: Mon Feb 14 09:05:02 2011 -0800
PCI: remove quirk for pre-production systems
commit b99af4b002e4908d1a5cdaf424529bdf1dc69768 upstream.
Revert commit 7eb93b175d4de9438a4b0af3a94a112cb5266944
Author: Yu Zhao <yu.zhao@intel.com>
Date: Fri Apr 3 15:18:11 2009 +0800
PCI: SR-IOV quirk for Intel 82576 NIC
If BIOS doesn't allocate resources for the SR-IOV BARs, zero the Flash
BAR and program the SR-IOV BARs to use the old Flash Memory Space.
Please refer to Intel 82576 Gigabit Ethernet Controller Datasheet
section 7.9.2.14.2 for details.
http://download.intel.com/design/network/datashts/82576_Datasheet.pdf
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This quirk was added before SR-IOV was in production and now all machines that
originally had this issue alreayd have bios updates to correct the issue. The
quirk itself is no longer needed and in fact causes bugs if run. Remove it.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Yu Zhao <yu.zhao@intel.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9f13867caa60c0dd55ac0dfc1021de1c4db7c83e
Author: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Date: Wed Mar 9 19:47:43 2011 -0600
ALSA: hda - fix digital mic selection in mixer on 92HD8X codecs
commit 094a42452abd5564429045e210281c6d22e67fca upstream.
When the mux for digital mic is different from the mux for other mics,
the current auto-parser doesn't handle them in a right way but provides
only one mic. This patch fixes the issue.
Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 23dd4f104b2630a225b41416d5237aca72ebc195
Author: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Date: Mon Sep 6 18:24:57 2010 -0400
xfs: prevent reading uninitialized stack memory
commit a122eb2fdfd78b58c6dd992d6f4b1aaef667eef9 upstream.
The XFS_IOC_FSGETXATTR ioctl allows unprivileged users to read 12
bytes of uninitialized stack memory, because the fsxattr struct
declared on the stack in xfs_ioc_fsgetxattr() does not alter (or zero)
the 12-byte fsx_pad member before copying it back to the user. This
patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Cc: dann frazier <dannf@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 24ae805d43b392998be1097ae0b43fdce2b0c493
Author: Libor Pechacek <lpechacek@suse.cz>
Date: Fri Jan 14 14:30:21 2011 +0100
USB: serial: handle Data Carrier Detect changes
commit d14fc1a74e846d7851f24fc9519fe87dc12a1231 upstream.
Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced
.carrier_raised function in several drivers. That also means
tty_port_block_til_ready can now suspend the process trying to open the serial
port when Carrier Detect is low and put it into tty_port.open_wait queue. We
need to wake up the process when Carrier Detect goes high and trigger TTY
hangup when CD goes low.
Some of the devices do not report modem status line changes, or at least we
don't understand the status message, so for those we remove .carrier_raised
again.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 659786b73216627aa156b8ff8c07837a109f19cf
Author: Craig Shelley <craig@microtron.org.uk>
Date: Sun Jan 2 21:59:08 2011 +0000
USB: CP210x Removed incorrect device ID
commit 9926c0df7b31b2128eebe92e0e2b052f380ea464 upstream.
Device ID removed 0x10C4/0x8149 for West Mountain Radio Computerized
Battery Analyzer. This device is actually based on a SiLabs C8051Fxxx,
see http://www.etheus.net/SiUSBXp_Linux_Driver for further info.
Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 31447d059064645b0629a015544eaac441a779fc
Author: Craig Shelley <craig@microtron.org.uk>
Date: Sun Jan 2 21:51:46 2011 +0000
USB: CP210x Add two device IDs
commit faea63f7ccfddfb8fc19798799fcd38c58415172 upstream.
Device Ids added for IRZ Automation Teleport SG-10 GSM/GPRS Modem and
DekTec DTA Plus VHF/UHF Booster/Attenuator.
Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b3133dba8ce1c78981887f255761d9c717d97177
Author: Márton Németh <nm127@freemail.hu>
Date: Mon Dec 13 21:59:09 2010 +0100
staging: usbip: remove double giveback of URB
commit 7571f089d7522a95c103558faf313c7af8856ceb upstream.
In the vhci_urb_dequeue() function the TCP connection is checked twice.
Each time when the TCP connection is closed the URB is unlinked and given
back. Remove the second attempt of unlinking and giving back of the URB completely.
This patch fixes the bug described at https://bugzilla.kernel.org/show_bug.cgi?id=24872 .
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 272d7ea16c12f3bd2720a862a28eeb39ca884129
Author: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Wed Sep 15 10:00:26 2010 -0400
sctp: Do not reset the packet during sctp_packet_config().
commit 4bdab43323b459900578b200a4b8cf9713ac8fab upstream.
sctp_packet_config() is called when getting the packet ready
for appending of chunks. The function should not touch the
current state, since it's possible to ping-pong between two
transports when sending, and that can result packet corruption
followed by skb overlfow crash.
Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ebe7aad41efd6c6fbf8c943e433689289d153c93
Author: Ryan Kuester <rkuester@kspace.net>
Date: Mon Apr 26 18:11:54 2010 -0500
SCSI: mptsas: fix hangs caused by ATA pass-through
commit 2a1b7e575b80ceb19ea50bfa86ce0053ea57181d upstream.
I may have an explanation for the LSI 1068 HBA hangs provoked by ATA
pass-through commands, in particular by smartctl.
First, my version of the symptoms. On an LSI SAS1068E B3 HBA running
01.29.00.00 firmware, with SATA disks, and with smartd running, I'm seeing
occasional task, bus, and host resets, some of which lead to hard faults of
the HBA requiring a reboot. Abusively looping the smartctl command,
# while true; do smartctl -a /dev/sdb > /dev/null; done
dramatically increases the frequency of these failures to nearly one per
minute. A high IO load through the HBA while looping smartctl seems to
improve the chance of a full scsi host reset or a non-recoverable hang.
I reduced what smartctl was doing down to a simple test case which
causes the hang with a single IO when pointed at the sd interface. See
the code at the bottom of this e-mail. It uses an SG_IO ioctl to issue
a single pass-through ATA identify device command. If the buffer
userspace gives for the read data has certain alignments, the task is
issued to the HBA but the HBA fails to respond. If run against the sg
interface, neither the test code nor smartctl causes a hang.
sd and sg handle the SG_IO ioctl slightly differently. Unless you
specifically set a flag to do direct IO, sg passes a buffer of its own,
which is page-aligned, to the block layer and later copies the result
into the userspace buffer regardless of its alignment. sd, on the other
hand, always does direct IO unless the userspace buffer fails an
alignment test at block/blk-map.c line 57, in which case a page-aligned
buffer is created and used for the transfer.
The alignment test currently checks for word-alignment, the default
setup by scsi_lib.c; therefore, userspace buffers of almost any
alignment are given directly to the HBA as DMA targets. The LSI 1068
hardware doesn't seem to like at least a couple of the alignments which
cross a page boundary (see the test code below). Curiously, many
page-boundary-crossing alignments do work just fine.
So, either the hardware has an bug handling certain alignments or the
hardware has a stricter alignment requirement than the driver is
advertising. If stricter alignment is required, then in no case should
misaligned buffers from userspace be allowed through without being
bounced or at least causing an error to be returned.
It seems the mptsas driver could use blk_queue_dma_alignment() to advertise
a stricter alignment requirement. If it does, sd does the right thing and
bounces misaligned buffers (see block/blk-map.c line 57). The following
patch to 2.6.34-rc5 makes my symptoms go away. I'm sure this is the wrong
place for this code, but it gets my idea across.
Acked-by: Kashyap Desai <Kashyap.Desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3ed36704fb8766909627b59a6564e3d43d7f033e
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue Sep 14 16:35:14 2010 +0200
sched: Fix user time incorrectly accounted as system time on 32-bit
commit e75e863dd5c7d96b91ebbd241da5328fc38a78cc upstream.
We have 32-bit variable overflow possibility when multiply in
task_times() and thread_group_times() functions. When the
overflow happens then the scaled utime value becomes erroneously
small and the scaled stime becomes i erroneously big.
Reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=633037
https://bugzilla.kernel.org/show_bug.cgi?id=16559
Reported-by: Michael Chapman <redhat-bugzilla@very.puzzling.org>
Reported-by: Ciriaco Garcia de Celis <sysman@etherpilot.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: <20100914143513.GB8415@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f45c71c17f9d8af84a5e652904b55b6938e70383
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue Jan 25 17:42:29 2011 +0800
rt2x00: add device id for windy31 usb device
commit 9c4cf6d94fb362c27a24df5223ed6e327eb7279a upstream.
This patch adds the device id for the windy31 USB device to the rt73usb
driver.
Thanks to Ralf Flaxa for reporting this and providing testing and a
sample device.
Reported-by: Ralf Flaxa <rf@suse.de>
Tested-by: Ralf Flaxa <rf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 527a95060a52006117803e36ac63911540fe0cf3
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Tue Aug 31 17:00:18 2010 -0700
pid: make setpgid() system call use RCU read-side critical section
commit 950eaaca681c44aab87a46225c9e44f902c080aa upstream.
[ 23.584719]
[ 23.584720] ===================================================
[ 23.585059] [ INFO: suspicious rcu_dereference_check() usage. ]
[ 23.585176] ---------------------------------------------------
[ 23.585176] kernel/pid.c:419 invoked rcu_dereference_check() without protection!
[ 23.585176]
[ 23.585176] other info that might help us debug this:
[ 23.585176]
[ 23.585176]
[ 23.585176] rcu_scheduler_active = 1, debug_locks = 1
[ 23.585176] 1 lock held by rc.sysinit/728:
[ 23.585176] #0: (tasklist_lock){.+.+..}, at: [<ffffffff8104771f>] sys_setpgid+0x5f/0x193
[ 23.585176]
[ 23.585176] stack backtrace:
[ 23.585176] Pid: 728, comm: rc.sysinit Not tainted 2.6.36-rc2 #2
[ 23.585176] Call Trace:
[ 23.585176] [<ffffffff8105b436>] lockdep_rcu_dereference+0x99/0xa2
[ 23.585176] [<ffffffff8104c324>] find_task_by_pid_ns+0x50/0x6a
[ 23.585176] [<ffffffff8104c35b>] find_task_by_vpid+0x1d/0x1f
[ 23.585176] [<ffffffff81047727>] sys_setpgid+0x67/0x193
[ 23.585176] [<ffffffff810029eb>] system_call_fastpath+0x16/0x1b
[ 24.959669] type=1400 audit(1282938522.956:4): avc: denied { module_request } for pid=766 comm="hwclock" kmod="char-major-10-135" scontext=system_u:system_r:hwclock_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclas
It turns out that the setpgid() system call fails to enter an RCU
read-side critical section before doing a PID-to-task_struct translation.
This commit therefore does rcu_read_lock() before the translation, and
also does rcu_read_unlock() after the last use of the returned pointer.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d941cd42c4c5056eaffaa35fb30480effc9a5278
Author: Tejun Heo <tj@kernel.org>
Date: Tue Sep 21 07:57:19 2010 +0200
percpu: fix pcpu_last_unit_cpu
commit 46b30ea9bc3698bc1d1e6fd726c9601d46fa0a91 upstream.
pcpu_first/last_unit_cpu are used to track which cpu has the first and
last units assigned. This in turn is used to determine the span of a
chunk for man/unmap cache flushes and whether an address belongs to
the first chunk or not in per_cpu_ptr_to_phys().
When the number of possible CPUs isn't power of two, a chunk may
contain unassigned units towards the end of a chunk. The logic to
determine pcpu_last_unit_cpu was incorrect when there was an unused
unit at the end of a chunk. It failed to ignore the unused unit and
assigned the unused marker NR_CPUS to pcpu_last_unit_cpu.
This was discovered through kdump failure which was caused by
malfunctioning per_cpu_ptr_to_phys() on a kvm setup with 50 possible
CPUs by CAI Qian.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1ecd68e25ed5ab04861ea146cc87ce936481d79f
Author: Mel Gorman <mel@csn.ul.ie>
Date: Thu Sep 9 16:38:16 2010 -0700
mm: page allocator: update free page counters after pages are placed on the free list
commit 72853e2991a2702ae93aaf889ac7db743a415dd3 upstream.
When allocating a page, the system uses NR_FREE_PAGES counters to
determine if watermarks would remain intact after the allocation was made.
This check is made without interrupts disabled or the zone lock held and
so is race-prone by nature. Unfortunately, when pages are being freed in
batch, the counters are updated before the pages are added on the list.
During this window, the counters are misleading as the pages do not exist
yet. When under significant pressure on systems with large numbers of
CPUs, it's possible for processes to make progress even though they should
have been stalled. This is particularly problematic if a number of the
processes are using GFP_ATOMIC as the min watermark can be accidentally
breached and in extreme cases, the system can livelock.
This patch updates the counters after the pages have been added to the
list. This makes the allocator more cautious with respect to preserving
the watermarks and mitigates livelock possibilities.
[akpm@linux-foundation.org: avoid modifying incoming args]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit baa466d398a90c02c01658f870f908910f4775d5
Author: Mel Gorman <mel@csn.ul.ie>
Date: Thu Sep 9 16:38:18 2010 -0700
mm: page allocator: drain per-cpu lists after direct reclaim allocation fails
commit 9ee493ce0a60bf42c0f8fd0b0fe91df5704a1cbf upstream.
When under significant memory pressure, a process enters direct reclaim
and immediately afterwards tries to allocate a page. If it fails and no
further progress is made, it's possible the system will go OOM. However,
on systems with large amounts of memory, it's possible that a significant
number of pages are on per-cpu lists and inaccessible to the calling
process. This leads to a process entering direct reclaim more often than
it should increasing the pressure on the system and compounding the
problem.
This patch notes that if direct reclaim is making progress but allocations
are still failing that the system is already under heavy pressure. In
this case, it drains the per-cpu lists and tries the allocation a second
time before continuing.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 35c27b582a9d67ab4e4ed64e662a3eb148999735
Author: Christoph Lameter <cl@linux.com>
Date: Thu Sep 9 16:38:17 2010 -0700
mm: page allocator: calculate a better estimate of NR_FREE_PAGES when memory is low and kswapd is awake
commit aa45484031ddee09b06350ab8528bfe5b2c76d1c upstream.
Ordinarily watermark checks are based on the vmstat NR_FREE_PAGES as it is
cheaper than scanning a number of lists. To avoid synchronization
overhead, counter deltas are maintained on a per-cpu basis and drained
both periodically and when the delta is above a threshold. On large CPU
systems, the difference between the estimated and real value of
NR_FREE_PAGES can be very high. If NR_FREE_PAGES is much higher than
number of real free page in buddy, the VM can allocate pages below min
watermark, at worst reducing the real number of pages to zero. Even if
the OOM killer kills some victim for freeing memory, it may not free
memory if the exit path requires a new page resulting in livelock.
This patch introduces a zone_page_state_snapshot() function (courtesy of
Christoph) that takes a slightly more accurate view of an arbitrary vmstat
counter. It is used to read NR_FREE_PAGES while kswapd is awake to avoid
the watermark being accidentally broken. The estimate is not perfect and
may result in cache line bounces but is expected to be lighter than the
IPI calls necessary to continually drain the per-cpu counters while kswapd
is awake.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 22b19ee0392cbc7e5d4fe3159113f585bf212944
Author: David Howells <dhowells@redhat.com>
Date: Fri Sep 10 09:59:51 2010 +0100
KEYS: Fix bug in keyctl_session_to_parent() if parent has no session keyring
commit 3d96406c7da1ed5811ea52a3b0905f4f0e295376 upstream.
Fix a bug in keyctl_session_to_parent() whereby it tries to check the ownership
of the parent process's session keyring whether or not the parent has a session
keyring [CVE-2010-2960].
This results in the following oops:
BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
IP: [<ffffffff811ae4dd>] keyctl_session_to_parent+0x251/0x443
...
Call Trace:
[<ffffffff811ae2f3>] ? keyctl_session_to_parent+0x67/0x443
[<ffffffff8109d286>] ? __do_fault+0x24b/0x3d0
[<ffffffff811af98c>] sys_keyctl+0xb4/0xb8
[<ffffffff81001eab>] system_call_fastpath+0x16/0x1b
if the parent process has no session keyring.
If the system is using pam_keyinit then it mostly protected against this as all
processes derived from a login will have inherited the session keyring created
by pam_keyinit during the log in procedure.
To test this, pam_keyinit calls need to be commented out in /etc/pam.d/.
Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Cc: dann frazier <dannf@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ef29fb3e1e3aa866828fe419ad4c360ac26d416c
Author: David Howells <dhowells@redhat.com>
Date: Fri Sep 10 09:59:46 2010 +0100
KEYS: Fix RCU no-lock warning in keyctl_session_to_parent()
commit 9d1ac65a9698513d00e5608d93fca0c53f536c14 upstream.
There's an protected access to the parent process's credentials in the middle
of keyctl_session_to_parent(). This results in the following RCU warning:
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
security/keys/keyctl.c:1291 invoked rcu_dereference_check() without protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by keyctl-session-/2137:
#0: (tasklist_lock){.+.+..}, at: [<ffffffff811ae2ec>] keyctl_session_to_parent+0x60/0x236
stack backtrace:
Pid: 2137, comm: keyctl-session- Not tainted 2.6.36-rc2-cachefs+ #1
Call Trace:
[<ffffffff8105606a>] lockdep_rcu_dereference+0xaa/0xb3
[<ffffffff811ae379>] keyctl_session_to_parent+0xed/0x236
[<ffffffff811af77e>] sys_keyctl+0xb4/0xb6
[<ffffffff81001eab>] system_call_fastpath+0x16/0x1b
The code should take the RCU read lock to make sure the parents credentials
don't go away, even though it's holding a spinlock and has IRQ disabled.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: dann frazier <dannf@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b62b1d7df40640fe8b5d257b84add8b009752153
Author: Eric Paris <eparis@redhat.com>
Date: Wed Jul 28 10:18:37 2010 -0400
inotify: send IN_UNMOUNT events
commit 611da04f7a31b2208e838be55a42c7a1310ae321 upstream.
Since the .31 or so notify rewrite inotify has not sent events about
inodes which are unmounted. This patch restores those events.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3e32b32342f9f58b70053ced9a9663228a125504
Author: Petr Tesarik <ptesarik@suse.cz>
Date: Wed Sep 15 15:35:48 2010 -0700
IA64: Optimize ticket spinlocks in fsys_rt_sigprocmask
commit 2d2b6901649a62977452be85df53eda2412def24 upstream.
Tony's fix (f574c843191728d9407b766a027f779dcd27b272) has a small bug,
it incorrectly uses "r3" as a scratch register in the first of the two
unlock paths ... it is also inefficient. Optimize the fast path again.
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f0d44f184f1cbce5fb831b07112bb609cb966300
Author: Tony Luck <tony.luck@intel.com>
Date: Thu Sep 9 15:16:56 2010 -0700
IA64: fix siglock
commit f574c843191728d9407b766a027f779dcd27b272 upstream.
When ia64 converted to using ticket locks, an inline implementation
of trylock/unlock in fsys.S was missed. This was not noticed because
in most circumstances it simply resulted in using the slow path because
the siglock was apparently not available (under old spinlock rules).
Problems occur when the ticket spinlock has value 0x0 (when first
initialised, or when it wraps around). At this point the fsys.S
code acquires the lock (changing the 0x0 to 0x1. If another process
attempts to get the lock at this point, it will change the value from
0x1 to 0x2 (using new ticket lock rules). Then the fsys.S code will
free the lock using old spinlock rules by writing 0x0 to it. From
here a variety of bad things can happen.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bc498e99c23ea0da7ee007001a7e7802f8ef3ca2
Author: Jean Delvare <khali@linux-fr.org>
Date: Wed Jan 12 21:55:09 2011 +0100
hwmon: (via686a) Initialize fan_div values
commit f790674d3f87df6390828ac21a7d1530f71b59c8 upstream.
Functions set_fan_min() and set_fan_div() assume that the fan_div
values have already been read from the register. The driver currently
doesn't initialize them at load time, they are only set when function
via686a_update_device() is called. This means that set_fan_min() and
set_fan_div() misbehave if, for example, "sensors -s" is called
before any monitoring application (e.g. "sensors") is has been run.
Fix the problem by always initializing the fan_div values at device
bind time.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6192bed1743d6a1bfc7c6620b3856f4284e31f4b
Author: Matt Helsley <matthltc@us.ibm.com>
Date: Mon Sep 13 13:01:18 2010 -0700
hw breakpoints: Fix pid namespace bug
commit 068e35eee9ef98eb4cab55181977e24995d273be upstream.
Hardware breakpoints can't be registered within pid namespaces
because tsk->pid is passed rather than the pid in the current
namespace.
(See https://bugzilla.kernel.org/show_bug.cgi?id=17281 )
This is a quick fix demonstrating the problem but is not the
best method of solving the problem since passing pids internally
is not the best way to avoid pid namespace bugs. Subsequent patches
will show a better solution.
Much thanks to Frederic Weisbecker <fweisbec@gmail.com> for doing
the bulk of the work finding this bug.
Reported-by: Robin Green <greenrd@greenrd.org>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <f63454af09fb1915717251570423eb9ddd338340.1284407762.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2d41b2aadaf5d3cb8300fcd418f6ae932902b11b
Author: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Tue Aug 17 23:56:55 2010 +0100
Fix unprotected access to task credentials in waitid()
commit f362b73244fb16ea4ae127ced1467dd8adaa7733 upstream.
Using a program like the following:
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
int main() {
id_t id;
siginfo_t infop;
pid_t res;
id = fork();
if (id == 0) { sleep(1); exit(0); }
kill(id, SIGSTOP);
alarm(1);
waitid(P_PID, id, &infop, WCONTINUED);
return 0;
}
to call waitid() on a stopped process results in access to the child task's
credentials without the RCU read lock being held - which may be replaced in the
meantime - eliciting the following warning:
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
kernel/exit.c:1460 invoked rcu_dereference_check() without protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by waitid02/22252:
#0: (tasklist_lock){.?.?..}, at: [<ffffffff81061ce5>] do_wait+0xc5/0x310
#1: (&(&sighand->siglock)->rlock){-.-...}, at: [<ffffffff810611da>]
wait_consider_task+0x19a/0xbe0
stack backtrace:
Pid: 22252, comm: waitid02 Not tainted 2.6.35-323cd+ #3
Call Trace:
[<ffffffff81095da4>] lockdep_rcu_dereference+0xa4/0xc0
[<ffffffff81061b31>] wait_consider_task+0xaf1/0xbe0
[<ffffffff81061d15>] do_wait+0xf5/0x310
[<ffffffff810620b6>] sys_waitid+0x86/0x1f0
[<ffffffff8105fce0>] ? child_wait_callback+0x0/0x70
[<ffffffff81003282>] system_call_fastpath+0x16/0x1b
This is fixed by holding the RCU read lock in wait_task_continued() to ensure
that the task's current credentials aren't destroyed between us reading the
cred pointer and us reading the UID from those credentials.
Furthermore, protect wait_task_stopped() in the same way.
We don't need to keep holding the RCU read lock once we've read the UID from
the credentials as holding the RCU read lock doesn't stop the target task from
changing its creds under us - so the credentials may be outdated immediately
after we've read the pointer, lock or no lock.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fba2e5ee19c351dc83008d29c9441b17a7d988af
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed Sep 15 19:08:24 2010 -0400
drivers/video/via/ioctl.c: prevent reading uninitialized stack memory
commit b4aaa78f4c2f9cde2f335b14f4ca30b01f9651ca upstream.
The VIAFB_GET_INFO device ioctl allows unprivileged users to read 246
bytes of uninitialized stack memory, because the "reserved" member of
the viafb_ioctl_info struct declared on the stack is not altered or
zeroed before being copied back to the user. This patch takes care of
it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7afb10e792956dba10b8df9f95b50420854f6923
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed Sep 22 13:05:09 2010 -0700
drivers/video/sis/sis_main.c: prevent reading uninitialized stack memory
commit fd02db9de73faebc51240619c7c7f99bee9f65c7 upstream.
The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16 bytes
of uninitialized stack memory, because the "reserved" member of the
fb_vblank struct declared on the stack is not altered or zeroed before
being copied back to the user. This patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 44498d9d63480b416a23e67a57c51481c861f8a3
Author: Jan Kara <jack@suse.cz>
Date: Tue Sep 21 11:49:01 2010 +0200
char: Mark /dev/zero and /dev/kmem as not capable of writeback
commit 371d217ee1ff8b418b8f73fb2a34990f951ec2d4 upstream.
These devices don't do any writeback but their device inodes still can get
dirty so mark bdi appropriately so that bdi code does the right thing and files
inodes to lists of bdi carrying the device inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 060049e494a4f234002941aa2403d849ca8c883c
Author: Michael Chan <mchan@broadcom.com>
Date: Tue Jun 1 15:05:36 2010 +0000
bnx2: Fix hang during rmmod bnx2.
commit f048fa9c8686119c3858a463cab6121dced7c0bf upstream.
The regression is caused by:
commit 4327ba435a56ada13eedf3eb332e583c7a0586a9
bnx2: Fix netpoll crash.
If ->open() and ->close() are called multiple times, the same napi structs
will be added to dev->napi_list multiple times, corrupting the dev->napi_list.
This causes free_netdev() to hang during rmmod.
We fix this by calling netif_napi_del() during ->close().
Also, bnx2_init_napi() must not be in the __devinit section since it is
called by ->open().
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 54142c959f88de9f41e637f39306085b8d7defcc
Author: Benjamin Li <benli@broadcom.com>
Date: Tue Mar 23 13:13:11 2010 +0000
bnx2: Fix netpoll crash.
commit 4327ba435a56ada13eedf3eb332e583c7a0586a9 upstream.
The bnx2 driver calls netif_napi_add() for all the NAPI structs during
->probe() time but not all of them will be used if we're not in MSI-X
mode. This creates a problem for netpoll since it will poll all the
NAPI structs in the dev_list whether or not they are scheduled, resulting
in a crash when we access structure fields not initialized for that vector.
We fix it by moving the netif_napi_add() call to ->open() after the number
of IRQ vectors has been determined.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bd33d194a874963afdc3261fa1158b720e90633c
Author: Karsten Wiese <fzu@wemgehoertderstaat.de>
Date: Tue Jan 4 01:20:37 2011 +0100
ALSA: snd-usb-us122l: Fix missing NULL checks
commit cdce2db74e156fbd9a2dc3c7b246166f8b70955b upstream.
Fix missing NULL checks in usb_stream_hwdep_poll() and usb_stream_hwdep_ioctl().
Wake up poll waiters before returning from usb_stream_hwdep_ioctl().
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8228803d07f7f154e97a71475ccd547afeea86bf
Author: Jeff Moyer <jmoyer@redhat.com>
Date: Fri Sep 10 14:16:00 2010 -0700
aio: check for multiplication overflow in do_io_submit
commit 75e1c70fc31490ef8a373ea2a4bea2524099b478 upstream.
Tavis Ormandy pointed out that do_io_submit does not do proper bounds
checking on the passed-in iocb array:
    if (unlikely(nr < 0))
        return -EINVAL;
    if (unlikely(!access_ok(VERIFY_READ, iocbpp, (nr*sizeof(iocbpp)))))
        return -EFAULT;            ^^^^^^^^^^^^^^^^^^
The attached patch checks for overflow, and if it is detected, the
number of iocbs submitted is scaled down to a number that will fit in
the long. Â This is an ok thing to do, as sys_io_submit is documented as
returning the number of iocbs submitted, so callers should handle a
return value of less than the 'nr' argument passed in.
Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ca4711e759f048f03ac3118bce3f82df3cf664ac
Author: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Wed Feb 23 18:12:29 2011 -0800
xhci: Fix cycle bit calculation during stall handling.
commit 01a1fdb9a7afa5e3c14c9316d6f380732750b4e4 upstream.
When an endpoint stalls, we need to update the xHCI host's internal
dequeue pointer to move it past the stalled transfer. This includes
updating the cycle bit (TRB ownership bit) if we have moved the dequeue
pointer past a link TRB with the toggle cycle bit set.
When we're trying to find the new dequeue segment, find_trb_seg() is
supposed to keep track of whether we've passed any link TRBs with the
toggle cycle bit set. However, this while loop's body
while (cur_seg->trbs > trb ||
&cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
Will never get executed if the ring only contains one segment.
find_trb_seg() will return immediately, without updating the new cycle
bit. Since find_trb_seg() has no idea where in the segment the TD that
stalled was, make the caller, xhci_find_new_dequeue_state(), check for
this special case and update the cycle bit accordingly.
This patch should be queued to kernels all the way back to 2.6.31.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fa2740a7a5d91a0f95c6b4cf3d809c15f0e1b901
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Tue Feb 8 21:07:40 2011 +0100
USB: isp1760: Implement solution for erratum 2
commit b14e840d04dba211fbdc930247e379085623eacd upstream.
The document says:
|2.1 Problem description
| When at least two USB devices are simultaneously running, it is observed that
| sometimes the INT corresponding to one of the USB devices stops occurring. This may
| be observed sometimes with USB-to-serial or USB-to-network devices.
| The problem is not noticed when only USB mass storage devices are running.
|2.2 Implication
| This issue is because of the clearing of the respective Done Map bit on reading the ATL
| PTD Done Map register when an INT is generated by another PTD completion, but is not
| found set on that read access. In this situation, the respective Done Map bit will remain
| reset and no further INT will be asserted so the data transfer corresponding to that USB
| device will stop.
|2.3 Workaround
| An SOF INT can be used instead of an ATL INT with polling on Done bits. A time-out can
| be implemented and if a certain Done bit is never set, verification of the PTD completion
| can be done by reading PTD contents (valid bit).
| This is a proven workaround implemented in software.
Russell King run into this with an USB-to-serial converter. This patch
implements his suggestion to enable the high frequent SOF interrupt only
at the time we have ATL packages queued. It goes even one step further
and enables the SOF interrupt only if we have more than one ATL packet
queued at the same time.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1a5e3da8abb0d354e906fc2e258e6ddf90a7ea6e
Author: wangyanqing <udknight@gmail.com>
Date: Fri Mar 11 06:24:38 2011 -0800
USB: serial: ch341: add new id
commit d0781383038e983a63843a9a6a067ed781db89c1 upstream.
I picked up a new DAK-780EX(professional digitl reverb/mix system),
which use CH341T chipset to communication with computer on 3/2011
and the CH341T's vendor code is 1a86
Looking up the CH341T's vendor and product id's I see:
1a86 QinHeng Electronics
5523 CH341 in serial mode, usb to serial port converter
CH341T,CH341 are the products of the same company, maybe
have some common hardware, and I test the ch341.c works
well with CH341T
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 87ddb1aae235017a3d244a87cc45655a7a724755
Author: Jiri Slaby <jslaby@suse.cz>
Date: Mon Feb 28 10:34:06 2011 +0100
USB: serial/kobil_sct, fix potential tty NULL dereference
commit 6960f40a954619857e7095a6179eef896f297077 upstream.
Make sure that we check the return value of tty_port_tty_get.
Sometimes it may return NULL and we later dereference that.
The only place here is in kobil_read_int_callback, so fix it.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1fdde2920cdf3926e64d4973bfc4d326d99e7079
Author: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Wed Dec 22 21:14:20 2010 +0530
ath9k_hw: Fix incorrect macversion and macrev checks
commit ac45c12dfb3f727a5a7a3332ed9c11b4a5ab287e upstream.
There are few places where we are checking for macversion and revsions
before RTC is powered ON. However we are reading the macversion and
revisions only after RTC is powered ON and so both macversion and
revisions are actully zero and this leads to incorrect srev checks
Incorrect srev checks can cause registers to be configured wrongly and can
cause unexpected behavior. Fixing this seems to address the ASPM issue that
we have observed. The laptop becomes very slow and hangs mostly with ASPM L1
enabled without this fix.
fix this by reading the macversion and revisisons even before we start
using them. There is no reason why should we delay reading this info
until RTC is powered on as this is just a register information.
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3516421d665e1542c8058b633c7fc1449b5cba97
Author: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Tue Mar 15 15:31:37 2011 +0100
x86, quirk: Fix SB600 revision check
commit 1d3e09a304e6c4e004ca06356578b171e8735d3c upstream.
Commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12
(x86 quirk: Fix polarity for IRQ0 pin2 override on SB800
systems) introduced a regression. It removed some SB600 specific
code to determine the revision ID without adapting a
corresponding revision ID check for SB600.
See this mail thread:
http://marc.info/?l=linux-kernel&m=129980296006380&w=2
This patch adapts the corresponding check to cover all SB600
revisions.
Tested-by: Wang Lei <f3d27b@gmail.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20110315143137.GD29499@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1ca398974b6c489d6737f52b69e05a9d49e1f295
Author: Sean Hefty <sean.hefty@intel.com>
Date: Wed Feb 23 08:17:40 2011 -0800
IB/cm: Bump reference count on cm_id before invoking callback
commit 29963437a48475036353b95ab142bf199adb909e upstream.
When processing a SIDR REQ, the ib_cm allocates a new cm_id. The
refcount of the cm_id is initialized to 1. However, cm_process_work
will decrement the refcount after invoking all callbacks. The result
is that the cm_id will end up with refcount set to 0 by the end of the
sidr req handler.
If a user tries to destroy the cm_id, the destruction will proceed,
under the incorrect assumption that no other threads are referencing
the cm_id. This can lead to a crash when the cm callback thread tries
to access the cm_id.
This problem was noticed as part of a larger investigation with kernel
crashes in the rdma_cm when running on a real time OS.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ccfb041348b62a233c66ed003cf99d2ec6e69f91
Author: Sean Hefty <sean.hefty@intel.com>
Date: Wed Feb 23 08:11:32 2011 -0800
RDMA/cma: Fix crash in request handlers
commit 25ae21a10112875763c18b385624df713a288a05 upstream.
Doug Ledford and Red Hat reported a crash when running the rdma_cm on
a real-time OS. The crash has the following call trace:
cm_process_work
cma_req_handler
cma_disable_callback
rdma_create_id
kzalloc
init_completion
cma_get_net_info
cma_save_net_info
cma_any_addr
cma_zero_addr
rdma_translate_ip
rdma_copy_addr
cma_acquire_dev
rdma_addr_get_sgid
ib_find_cached_gid
cma_attach_to_dev
ucma_event_handler
kzalloc
ib_copy_ah_attr_to_user
cma_comp
[ preempted ]
cma_write
copy_from_user
ucma_destroy_id
copy_from_user
_ucma_find_context
ucma_put_ctx
ucma_free_ctx
rdma_destroy_id
cma_exch
cma_cancel_operation
rdma_node_get_transport
rt_mutex_slowunlock
bad_area_nosemaphore
oops_enter
They were able to reproduce the crash multiple times with the
following details:
Crash seems to always happen on the:
mutex_unlock(&conn_id->handler_mutex);
as conn_id looks to have been freed during this code path.
An examination of the code shows that a race exists in the request
handlers. When a new connection request is received, the rdma_cm
allocates a new connection identifier. This identifier has a single
reference count on it. If a user calls rdma_destroy_id() from another
thread after receiving a callback, rdma_destroy_id will proceed to
destroy the id and free the associated memory. However, the request
handlers may still be in the process of running. When control returns
to the request handlers, they can attempt to access the newly created
identifiers.
Fix this by holding a reference on the newly created rdma_cm_id until
the request handler is through accessing it.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 925f1e4d33b86cd8f425507b9d6910e2dd752a10
Author: Seth Heasley <seth.heasley@intel.com>
Date: Fri Mar 11 11:57:42 2011 -0800
ahci: AHCI mode SATA patch for Intel Patsburg SATA RAID controller
commit 64a3903d0885879ba8706a8bcf71c5e3e7664db2 upstream.
This patch adds an updated SATA RAID DeviceID for the Intel Patsburg PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d7ffbbd8f1c0c90f02d3622074b5c964b9de3c06
Author: Seth Heasley <seth.heasley@intel.com>
Date: Mon Jan 10 12:57:17 2011 -0800
ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs
commit a4a461a6df6c0481d5a3d61660ed97f5b539cf16 upstream.
This patch adds the AHCI-mode SATA DeviceID for the Intel DH89xxCC PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9a377c7d08fffaeace59d60b8432829d17cba77a
Author: Seth Heasley <seth.heasley@intel.com>
Date: Thu Sep 9 09:44:56 2010 -0700
ahci: AHCI and RAID mode SATA patch for Intel Patsburg DeviceIDs
commit 992b3fb9b5391bc4de5b42bb810dc6dd583a6c4a upstream.
This patch adds the Intel Patsburg (PCH) SATA AHCI and RAID Controller
DeviceIDs.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7203bdb035b9145b565da28d71a823d647425cee
Author: Kamal Mostafa <kamal@canonical.com>
Date: Thu Feb 3 17:38:05 2011 -0800
x86: Emit "mem=nopentium ignored" warning when not supported
commit 9a6d44b9adb777ca9549e88cd55bd8f2673c52a2 upstream.
Emit warning when "mem=nopentium" is specified on any arch other
than x86_32 (the only that arch supports it).
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/553464
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
LKML-Reference: <1296783486-23033-2-git-send-email-kamal@canonical.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fcf391eef3662d8160ba3cd14aa000c43dd84920
Author: Kamal Mostafa <kamal@canonical.com>
Date: Thu Feb 3 17:38:04 2011 -0800
x86: Fix panic when handling "mem={invalid}" param
commit 77eed821accf5dd962b1f13bed0680e217e49112 upstream.
Avoid removing all of memory and panicing when "mem={invalid}"
is specified, e.g. mem=blahblah, mem=0, or mem=nopentium (on
platforms other than x86_32).
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/553464
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
LKML-Reference: <1296783486-23033-1-git-send-email-kamal@canonical.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b0e080d125f14ce2cde9a2ab50b2c2d0fb5609df
Author: Steven Rostedt <srostedt@redhat.com>
Date: Thu Feb 10 21:26:13 2011 -0500
ftrace: Fix memory leak with function graph and cpu hotplug
commit 868baf07b1a259f5f3803c1dc2777b6c358f83cf upstream.
When the fuction graph tracer starts, it needs to make a special
stack for each task to save the real return values of the tasks.
All running tasks have this stack created, as well as any new
tasks.
On CPU hot plug, the new idle task will allocate a stack as well
when init_idle() is called. The problem is that cpu hotplug does
not create a new idle_task. Instead it uses the idle task that
existed when the cpu went down.
ftrace_graph_init_task() will add a new ret_stack to the task
that is given to it. Because a clone will make the task
have a stack of its parent it does not check if the task's
ret_stack is already NULL or not. When the CPU hotplug code
starts a CPU up again, it will allocate a new stack even
though one already existed for it.
The solution is to treat the idle_task specially. In fact, the
function_graph code already does, just not at init_idle().
Instead of using the ftrace_graph_init_task() for the idle task,
which that function expects the task to be a clone, have a
separate ftrace_graph_init_idle_task(). Also, we will create a
per_cpu ret_stack that is used by the idle task. When we call
ftrace_graph_init_idle_task() it will check if the idle task's
ret_stack is NULL, if it is, then it will assign it the per_cpu
ret_stack.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 36aeae772759b927bd784e1bf9501c2962084149
Author: Andrey Vagin <avagin@openvz.org>
Date: Wed Mar 9 15:22:23 2011 -0800
x86/mm: Handle mm_fault_error() in kernel space
commit f86268549f424f83b9eb0963989270e14fbfc3de upstream.
mm_fault_error() should not execute oom-killer, if page fault
occurs in kernel space. E.g. in copy_from_user()/copy_to_user().
This would happen if we find ourselves in OOM on a
copy_to_user(), or a copy_from_user() which faults.
Without this patch, the kernels hangs up in copy_from_user(),
because OOM killer sends SIG_KILL to current process, but it
can't handle a signal while in syscall, then the kernel returns
to copy_from_user(), reexcute current command and provokes
page_fault again.
With this patch the kernel return -EFAULT from copy_from_user().
The code, which checks that page fault occurred in kernel space,
has been copied from do_sigbus().
This situation is handled by the same way on powerpc, xtensa,
tile, ...
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <201103092322.p29NMNPH001682@imap1.linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 34dce55d3302779116b6b9bc82cb8dfc50acbd11
Author: Florian Fainelli <florian@openwrt.org>
Date: Sun Feb 27 19:53:53 2011 +0100
MIPS: MTX-1: Make au1000_eth probe all PHY addresses
commit bf3a1eb85967dcbaae42f4fcb53c2392cec32677 upstream.
When au1000_eth probes the MII bus for PHY address, if we do not set
au1000_eth platform data's phy_search_highest_address, the MII probing
logic will exit early and will assume a valid PHY is found at address 0.
For MTX-1, the PHY is at address 31, and without this patch, the link
detection/speed/duplex would not work correctly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2111/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit eed80090b96646eb9c670bab22cb6aba4b42497f
Author: Tejun Heo <tj@kernel.org>
Date: Thu Dec 9 15:59:32 2010 +0100
libata: no special completion processing for EH commands
commit f08dc1ac6b15c681f4643d8da1700e06c3855608 upstream.
ata_qc_complete() contains special handling for certain commands. For
example, it schedules EH for device revalidation after certain
configurations are changed. These shouldn't be applied to EH
commands but they were.
In most cases, it doesn't cause an actual problem because EH doesn't
issue any command which would trigger special handling; however, ACPI
can issue such commands via _GTF which can cause weird interactions.
Restructure ata_qc_complete() such that EH commands are always passed
on to __ata_qc_complete().
stable: Please apply to -stable only after 2.6.38 is released.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5e6964da4ef23f7c43d0fa3ade7b8898573a2b42
Author: Axel Lin <axel.lin@gmail.com>
Date: Mon Mar 7 11:04:24 2011 +0800
mtd: add "platform:" prefix for platform modalias
commit c804c733846572ca85c2bba60c7fe6fa024dff18 upstream.
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit cad501be7dab2f50df805e3e04fac36b6276156a
Author: Antony Pavlov <antony@niisi.msk.ru>
Date: Fri Feb 11 13:00:37 2011 +0300
mtd: jedec_probe: Change variable name from cfi_p to cfi
commit efba2e313ea1b1bd69a7c4659263becf43bb1adc upstream.
In the following commit, we'll need to use the CMD() macro in order to
fix the initialisation of the sector_erase_cmd field. That requires the
local variable to be called 'cfi', so change it first in a simple patch.
Signed-off-by: Antony Pavlov <antony@niisi.msk.ru>
Acked-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4a4465f1079bb6bb733e3ea5de79effc08f54bf2
Author: Hans de Goede <hdegoede@redhat.com>
Date: Sun Mar 13 13:50:33 2011 +0100
hwmon/f71882fg: Set platform drvdata to NULL later
commit d9ebaa45472c92704f4814682eec21455edcfa1f upstream.
This avoids a possible race leading to trying to dereference NULL.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 430681f49ab17c025d631d80436143286436a828
Author: Vasiliy Kulikov <segoon@openwall.com>
Date: Wed Mar 2 00:33:13 2011 +0300
net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules
commit 8909c9ad8ff03611c9c96c9a92656213e4bb495b upstream.
Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with
CAP_NET_ADMIN may load any module from /lib/modules/. This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**. However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.
This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases. This fixes CVE-2011-1019.
Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".
Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.
root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
root@albatros:~# grep Cap /proc/$$/status
CapInh: 0000000000000000
CapPrm: fffffff800001000
CapEff: fffffff800001000
CapBnd: fffffff800001000
root@albatros:~# modprobe xfs
FATAL: Error inserting xfs
(/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
root@albatros:~# lsmod | grep xfs
root@albatros:~# ifconfig xfs
xfs: error fetching interface information: Device not found
root@albatros:~# lsmod | grep xfs
root@albatros:~# lsmod | grep sit
root@albatros:~# ifconfig sit
sit: error fetching interface information: Device not found
root@albatros:~# lsmod | grep sit
root@albatros:~# ifconfig sit0
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
root@albatros:~# lsmod | grep sit
sit 10457 0
tunnel4 2957 1 sit
For CAP_SYS_MODULE module loading is still relaxed:
root@albatros:~# grep Cap /proc/$$/status
CapInh: 0000000000000000
CapPrm: ffffffffffffffff
CapEff: ffffffffffffffff
CapBnd: ffffffffffffffff
root@albatros:~# ifconfig xfs
xfs: error fetching interface information: Device not found
root@albatros:~# lsmod | grep xfs
xfs 745319 0
Reference: https://lkml.org/lkml/2011/2/24/203
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a574ce70da46d41ac46abff2915f771ee9f9df6a
Author: Olivier Grenie <olivier.grenie@dibcom.fr>
Date: Fri Jan 14 13:58:59 2011 -0300
DiB7000M: add pid filtering
commit e192a7cf0effe7680264a5bc35c0ad1bdcdc921c upstream.
This patch adds the pid filtering for the dib7000M demod. It also
corrects the pid filtering for the dib7700 based board. It should
prevent an oops, when using dib7700p based board.
References: https://bugzilla.novell.com/show_bug.cgi?id=644807
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Tested-by: Pavel SKARKA <paul.sp@seznam.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0678b7c36a4d38946740ad0f2b0c4411397eb370
Author: Ivan Vecera <ivecera@redhat.com>
Date: Thu Jan 27 12:24:11 2011 +0100
r8169: use RxFIFO overflow workaround for 8168c chipset.
commit b5ba6d12bdac21bc0620a5089e0f24e362645efd upstream.
I found that one of the 8168c chipsets (concretely XID 1c4000c0) starts
generating RxFIFO overflow errors. The result is an infinite loop in
interrupt handler as the RxFIFOOver is handled only for ...MAC_VER_11.
With the workaround everything goes fine.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes <hayeswang@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit be0484472b6fff8b331ce8be44d737b88e57a130
Author: roel <roel.kluin@gmail.com>
Date: Tue Mar 8 22:32:26 2011 +0100
nfsd: wrong index used in inner loop
commit 3ec07aa9522e3d5e9d5ede7bef946756e623a0a0 upstream.
Index i was already used in the outer loop
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9147532184cd5d39a677ad15c5b9a7fa9cea631a
Author: Matt Evans <matt@ozlabs.org>
Date: Mon Mar 7 17:26:04 2011 +0530
powerpc/kexec: Fix orphaned offline CPUs across kexec
Commit: e8e5c2155b0035b6e04f29be67f6444bc914005b upstream
When CPU hotplug is used, some CPUs may be offline at the time a kexec is
performed. The subsequent kernel may expect these CPUs to be already running,
and will declare them stuck. On pseries, there's also a soft-offline (cede)
state that CPUs may be in; this can also cause problems as the kexeced kernel
may ask RTAS if they're online -- and RTAS would say they are. The CPU will
either appear stuck, or will cause a crash as we replace its cede loop beneath
it.
This patch kicks each present offline CPU awake before the kexec, so that
none are forever lost to these assumptions in the subsequent kernel.
Now, the behaviour is that all available CPUs that were offlined are now
online & usable after the kexec. This mimics the behaviour of a full reboot
(on which all CPUs will be restarted).
Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kamalesh babulal <kamalesh@linux.vnet.ibm.com>
cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 333200c5233cc5c5a472977e38fcfe7dc246d83f
Author: Jan Engelhardt <jengelh@medozas.de>
Date: Wed Mar 2 12:10:13 2011 +0100
netfilter: nf_log: avoid oops in (un)bind with invalid nfproto values
commit 9ef0298a8e5730d9a46d640014c727f3b4152870 upstream.
Like many other places, we have to check that the array index is
within allowed limits, or otherwise, a kernel oops and other nastiness
can ensue when we access memory beyond the end of the array.
[ 5954.115381] BUG: unable to handle kernel paging request at 0000004000000000
[ 5954.120014] IP: __find_logger+0x6f/0xa0
[ 5954.123979] nf_log_bind_pf+0x2b/0x70
[ 5954.123979] nfulnl_recv_config+0xc0/0x4a0 [nfnetlink_log]
[ 5954.123979] nfnetlink_rcv_msg+0x12c/0x1b0 [nfnetlink]
...
The problem goes back to v2.6.30-rc1~1372~1342~31 where nf_log_bind
was decoupled from nf_log_register.
Reported-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>,
via irc.freenode.net/#netfilter
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a3e580e27b823487f5049dde077253915351409a
Author: Maxim Uvarov <muvarov@gmail.com>
Date: Tue May 11 05:41:08 2010 +0000
powerpc/crashdump: Do not fail on NULL pointer dereferencing
commit 426b6cb478e60352a463a0d1ec75c1c9fab30b13 upstream.
Signed-off-by: Maxim Uvarov <muvarov@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kamalesh babulal <kamalesh@linux.vnet.ibm.com>
cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5c1ce60272a33ea4864e24d7dea40af3d947374a
Author: Michael Neuling <mikey@neuling.org>
Date: Mon May 10 20:28:26 2010 +0000
powerpc/kexec: Speedup kexec hash PTE tear down
commit d504bed676caad29a3dba3d3727298c560628f5c upstream.
Currently for kexec the PTE tear down on 1TB segment systems normally
requires 3 hcalls for each PTE removal. On a machine with 32GB of
memory it can take around a minute to remove all the PTEs.
This optimises the path so that we only remove PTEs that are valid.
It also uses the read 4 PTEs at once HCALL. For the common case where
a PTEs is invalid in a 1TB segment, this turns the 3 HCALLs per PTE
down to 1 HCALL per 4 PTEs.
This gives an > 10x speedup in kexec times on PHYP, taking a 32GB
machine from around 1 minute down to a few seconds.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kamalesh babulal <kamalesh@linux.vnet.ibm.com>
cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 543366ccb6d8fe2b42e5653c374b1109208b4700
Author: Michael Neuling <mikey@neuling.org>
Date: Mon May 10 20:28:26 2010 +0000
powerpc/pseries: Add hcall to read 4 ptes at a time in real mode
commit f90ece28c1f5b3ec13fe481406857fe92f4bc7d1 upstream.
This adds plpar_pte_read_4_raw() which can be used read 4 PTEs from
PHYP at a time, while in real mode.
It also creates a new hcall9 which can be used in real mode. It's the
same as plpar_hcall9 but minus the tracing hcall statistics which may
require variables outside the RMO.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kamalesh babulal <kamalesh@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c006ef62a4609974e184814c6455cb53603a93ff
Author: Anton Blanchard <anton@samba.org>
Date: Mon May 10 16:27:38 2010 +0000
powerpc/kdump: Use chip->shutdown to disable IRQs
commit 5d7a87217de48b234b3c8ff8a73059947d822e07 upstream.
I saw this in a kdump kernel:
IOMMU table initialized, virtual merging enabled
Interrupt 155954 (real) is invalid, disabling it.
Interrupt 155953 (real) is invalid, disabling it.
ie we took some spurious interrupts. default_machine_crash_shutdown tries
to disable all interrupt sources but uses chip->disable which maps to
the default action of:
static void default_disable(unsigned int irq)
{
}
If we use chip->shutdown, then we actually mask the IRQ:
static void default_shutdown(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
desc->chip->mask(irq);
desc->status |= IRQ_MASKED;
}
Not sure why we don't implement a ->disable action for xics.c, or why
default_disable doesn't mask the interrupt.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kamalesh babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit efa2edb38d914d449f4f574ac3003637631484d2
Author: Anton Blanchard <anton@samba.org>
Date: Mon May 10 16:25:51 2010 +0000
powerpc/kdump: CPUs assume the context of the oopsing CPU
commit 0644079410065567e3bb31fcb8e6441f2b7685a9 upstream.
We wrap the crash_shutdown_handles[] calls with longjmp/setjmp, so if any
of them fault we can recover. The problem is we add a hook to the debugger
fault handler hook which calls longjmp unconditionally.
This first part of kdump is run before we marshall the other CPUs, so there
is a very good chance some CPU on the box is going to page fault. And when
it does it hits the longjmp code and assumes the context of the oopsing CPU.
The machine gets very confused when it has 10 CPUs all with the same stack,
all thinking they have the same CPU id. I get even more confused trying
to debug it.
The patch below adds crash_shutdown_cpu and uses it to specify which cpu is
in the protected region. Since it can only be -1 or the oopsing CPU, we don't
need to use memory barriers since it is only valid on the local CPU - no other
CPU will ever see a value that matches it's local CPU id.
Eventually we should switch the order and marshall all CPUs before doing the
crash_shutdown_handles[] calls, but that is a bigger fix.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kamalesh babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8f52e5db24ab6b73f0a33e5748b9462be650e7c9
Author: Anton Blanchard <anton@samba.org>
Date: Mon May 10 18:59:18 2010 +0000
powerpc: Use more accurate limit for first segment memory allocations
commit 095c7965f4dc870ed2b65143b1e2610de653416c upstream.
Author: Milton Miller <miltonm@bga.com>
On large machines we are running out of room below 256MB. In some cases we
only need to ensure the allocation is in the first segment, which may be
256MB or 1TB.
Add slb0_limit and use it to specify the upper limit for the irqstack and
emergency stacks.
On a large ppc64 box, this fixes a panic at boot when the crashkernel=
option is specified (previously we would run out of memory below 256MB).
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1ed9c543aa80a4e42b61ddd02b2a66986660165f
Author: Hugh Dickins <hughd@google.com>
Date: Wed Feb 23 21:39:49 2011 -0800
mm: fix possible cause of a page_mapped BUG
commit a3e8cc643d22d2c8ed36b9be7d9c9ca21efcf7f7 upstream.
Robert Swiecki reported a BUG_ON(page_mapped) from a fuzzer, punching
a hole with madvise(,, MADV_REMOVE). That path is under mutex, and
cannot be explained by lack of serialization in unmap_mapping_range().
Reviewing the code, I found one place where vm_truncate_count handling
should have been updated, when I switched at the last minute from one
way of managing the restart_addr to another: mremap move changes the
virtual addresses, so it ought to adjust the restart_addr.
But rather than exporting the notion of restart_addr from memory.c, or
converting to restart_pgoff throughout, simply reset vm_truncate_count
to 0 to force a rescan if mremap move races with preempted truncation.
We have no confirmation that this fixes Robert's BUG,
but it is a fix that's worth making anyway.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kerin Millar <kerframil@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8238f12a32d413d5ad69f2e975972ecb31f7ce70
Author: Don Skidmore <donald.c.skidmore@intel.com>
Date: Tue Jan 18 22:53:47 2011 +0000
ixgbe: fix for 82599 erratum on Header Splitting
commit a124339ad28389093ed15eca990d39c51c5736cc upstream.
We have found a hardware erratum on 82599 hardware that can lead to
unpredictable behavior when Header Splitting mode is enabled. So
we are no longer enabling this feature on affected hardware.
Please see the 82599 Specification Update for more information.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d1d2de54ebe491ecf12298b469e95b7544483340
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu Sep 30 12:36:45 2010 +0200
drm/ttm: Fix two race conditions + fix busy codepaths
commit 1df6a2ebd75067aefbdf07482bf8e3d0584e04ee upstream.
This fixes a race pointed out by Dave Airlie where we don't take a buffer
object about to be destroyed off the LRU lists properly. It also fixes a rare
case where a buffer object could be destroyed in the middle of an
accelerated eviction.
The patch also adds a utility function that can be used to prematurely
release GPU memory space usage of an object waiting to be destroyed.
For example during eviction or swapout.
The above mentioned commit didn't queue the buffer on the delayed destroy
list under some rare circumstances. It also didn't completely honor the
remove_all parameter.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=615505
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591061
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[ Backported to 2.6.33 -maks ]
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a06c5ec79df5e4fe7d137f8a06c95e065f081cff
Author: Anton Blanchard <anton@au1.ibm.com>
Date: Mon Feb 28 03:27:53 2011 +0000
RxRPC: Fix v1 keys
commit f009918a1c1bbf8607b8aab3959876913a30193a upstream.
commit 339412841d7 (RxRPC: Allow key payloads to be passed in XDR form)
broke klog for me. I notice the v1 key struct had a kif_version field
added:
-struct rxkad_key {
- u16 security_index; /* RxRPC header security index */
- u16 ticket_len; /* length of ticket[] */
- u32 expiry; /* time at which expires */
- u32 kvno; /* key version number */
- u8 session_key[8]; /* DES session key */
- u8 ticket[0]; /* the encrypted ticket */
-};
+struct rxrpc_key_data_v1 {
+ u32 kif_version; /* 1 */
+ u16 security_index;
+ u16 ticket_length;
+ u32 expiry; /* time_t */
+ u32 kvno;
+ u8 session_key[8];
+ u8 ticket[0];
+};
However the code in rxrpc_instantiate strips it away:
data += sizeof(kver);
datalen -= sizeof(kver);
Removing kif_version fixes my problem.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c6d521a02d4a12b1fb3aff6694d400905f4a73f7
Author: Dan Carpenter <error27@gmail.com>
Date: Thu Mar 3 17:56:06 2011 +0100
keyboard: integer underflow bug
commit b652277b09d3d030cb074cc6a98ba80b34244c03 upstream.
The "ct" variable should be an unsigned int. Both struct kbdiacrs
->kb_cnt and struct kbd_data ->accent_table_size are unsigned ints.
Making it signed causes a problem in KBDIACRUC because the user could
set the signed bit and cause a buffer overflow.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2c103bfa4db025da9ab9428981e9e8afcc765492
Author: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri Mar 4 17:36:21 2011 -0800
cpuset: add a missing unlock in cpuset_write_resmask()
commit b75f38d659e6fc747eda64cb72f3920e29dd44a4 upstream.
Don't forget to release cgroup_mutex if alloc_trial_cpuset() fails.
[akpm@linux-foundation.org: avoid multiple return points]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 76d102e4c2e0509c58dfe51322e825604afdb0d0
Author: Pavel Shilovsky <piastryyy@gmail.com>
Date: Mon Jan 17 20:15:44 2011 +0300
CIFS: Fix oplock break handling (try #2)
commit 12fed00de963433128b5366a21a55808fab2f756 upstream.
When we get oplock break notification we should set the appropriate
value of OplockLevel field in oplock break acknowledge according to
the oplock level held by the client in this time. As we only can have
level II oplock or no oplock in the case of oplock break, we should be
aware only about clientCanCacheRead field in cifsInodeInfo structure.
Also fix bug connected with wrong interpretation of OplockLevel field
during oplock break notification processing.
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6b85e439753bfb9e1665a9697df51600cb864c38
Author: Kees Cook <kees.cook@canonical.com>
Date: Mon Oct 11 11:28:16 2010 -0700
usb: iowarrior: don't trust report_size for buffer size
commit 3ed780117dbe5acb64280d218f0347f238dafed0 upstream.
If the iowarrior devices in this case statement support more than 8 bytes
per report, it is possible to write past the end of a kernel heap allocation.
This will probably never be possible, but change the allocation to be more
defensive anyway.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Brandon Philips <bphilips@suse.de>
commit ee269be9e14809eb981021241931c49ad884a25b
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue Feb 22 02:00:11 2011 +0000
r8169: disable ASPM
commit ba04c7c93bbcb48ce880cf75b6e9dffcd79d4c7b upstream.
For some time is known that ASPM is causing troubles on r8169, i.e. make
device randomly stop working without any errors in dmesg.
Currently Tomi Leppikangas reports that system with r8169 device hangs
with MCE errors when ASPM is enabled:
https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4
Lets disable ASPM for r8169 devices at all, to avoid problems with
r8169 PCIe devices at least for some users.
Reported-by: Tomi Leppikangas <tomi.leppikangas@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 20ec7917f9e94256373a2f12e99770a7d2c1a25d
Author: Bruce Allan <bruce.w.allan@intel.com>
Date: Wed Feb 2 09:30:36 2011 +0000
e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup instead
commit 4def99bbfd46e05c5e03b5b282cb4ee30e27ff19 upstream.
When support for 82577/82578 was added[1] in 2.6.31, PHY wakeup was in-
advertently enabled (even though it does not function properly) on ICH10
LOMs. This patch makes it so that the ICH10 LOMs use MAC wakeup instead
as was done with the initial support for those devices (i.e. 82567LM-3,
82567LF-3 and 82567V-4).
[1] commit a4f58f5455ba0efda36fb33c37074922d1527a10
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 519c0f5f84fe7ce673305bf12c55a01361b0ee50
Author: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Date: Tue Mar 1 23:02:07 2011 -0800
dccp: fix oops on Reset after close
commit 720dc34bbbe9493c7bd48b2243058b4e447a929d upstream.
This fixes a bug in the order of dccp_rcv_state_process() that still permitted
reception even after closing the socket. A Reset after close thus causes a NULL
pointer dereference by not preventing operations on an already torn-down socket.
dccp_v4_do_rcv()
|
| state other than OPEN
v
dccp_rcv_state_process()
|
| DCCP_PKT_RESET
v
dccp_rcv_reset()
|
v
dccp_time_wait()
WARNING: at net/ipv4/inet_timewait_sock.c:141 __inet_twsk_hashdance+0x48/0x128()
Modules linked in: arc4 ecb carl9170 rt2870sta(C) mac80211 r8712u(C) crc_ccitt ah
[<c0038850>] (unwind_backtrace+0x0/0xec) from [<c0055364>] (warn_slowpath_common)
[<c0055364>] (warn_slowpath_common+0x4c/0x64) from [<c0055398>] (warn_slowpath_n)
[<c0055398>] (warn_slowpath_null+0x1c/0x24) from [<c02b72d0>] (__inet_twsk_hashd)
[<c02b72d0>] (__inet_twsk_hashdance+0x48/0x128) from [<c031caa0>] (dccp_time_wai)
[<c031caa0>] (dccp_time_wait+0x40/0xc8) from [<c031c15c>] (dccp_rcv_state_proces)
[<c031c15c>] (dccp_rcv_state_process+0x120/0x538) from [<c032609c>] (dccp_v4_do_)
[<c032609c>] (dccp_v4_do_rcv+0x11c/0x14c) from [<c0286594>] (release_sock+0xac/0)
[<c0286594>] (release_sock+0xac/0x110) from [<c031fd34>] (dccp_close+0x28c/0x380)
[<c031fd34>] (dccp_close+0x28c/0x380) from [<c02d9a78>] (inet_release+0x64/0x70)
The fix is by testing the socket state first. Receiving a packet in Closed state
now also produces the required "No connection" Reset reply of RFC 4340, 8.3.1.
Reported-and-tested-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2b0d4ae04fcc5e16d9add9d5aecf870389a88c84
Author: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat Feb 26 12:58:06 2011 +0100
p54usb: add Senao NUB-350 usbid
commit 2b799a6b25bb9f9fbc478782cd9503e8066ab618 upstream.
Reported-by: Mark Davis
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 44778504c7cfe79b7f93de49d6f6a8798a964982
Author: David S. Miller <davem@davemloft.net>
Date: Wed Feb 9 21:48:36 2011 -0800
x25: Do not reference freed memory.
commit 96642d42f076101ba98866363d908cab706d156c upstream.
In x25_link_free(), we destroy 'nb' before dereferencing
'nb->dev'. Don't do this, because 'nb' might be freed
by then.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6104ea834d963524862c5565983f65089957b91b
Author: Michael S. Tsirkin <mst@redhat.com>
Date: Sun Nov 29 17:52:00 2009 +0200
virtio: set pci bus master enable bit
commit bc505f373979692d51a86d40925f77a8b09d17b9 upstream.
As all virtio devices perform DMA, we
must enable bus mastering for them to be
spec compliant.
This patch fixes hotplug of virtio devices
with Linux guests and qemu 0.11-0.12.
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 14bcdf0bc282f0ea21574d4fec4df15900ceb4c4
Author: Josh Hunt <johunt@akamai.com>
Date: Thu Feb 24 11:48:22 2011 +0100
ext2: Fix link count corruption under heavy link+rename load
commit e8a80c6f769dd4622d8b211b398452158ee60c0b upstream.
vfs_rename_other() does not lock renamed inode with i_mutex. Thus changing
i_nlink in a non-atomic manner (which happens in ext2_rename()) can corrupt
it as reported and analyzed by Josh.
In fact, there is no good reason to mess with i_nlink of the moved file.
We did it presumably to simulate linking into the new directory and unlinking
from an old one. But the practical effect of this is disputable because fsck
can possibly treat file as being properly linked into both directories without
writing any error which is confusing. So we just stop increment-decrement
games with i_nlink which also fixes the corruption.
CC: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 002b43bfac57403ff58fe9cda16d71bdfac99dcc
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Fri Feb 25 22:34:23 2011 +0100
clockevents: Prevent oneshot mode when broadcast device is periodic
commit 3a142a0672b48a853f00af61f184c7341ac9c99d upstream.
When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only
can switch into oneshot mode, when the backup broadcast device
supports oneshot mode as well. Otherwise we would try to switch the
broadcast device into an unsupported mode unconditionally. This went
unnoticed so far as the current available broadcast devices support
oneshot mode. Seth unearthed this problem while debugging and working
around an hpet related BIOS wreckage.
Add the necessary check to tick_is_oneshot_available().
Reported-and-tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1102252231200.2701@localhost6.localdomain6>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5c46eb076e0a1b2c1769287cd6942e4594ade1b1
Author: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri Feb 25 14:44:58 2011 +0100
fuse: fix hang of single threaded fuseblk filesystem
commit 5a18ec176c934ca1bc9dc61580a5e0e90a9b5733 upstream.
Single threaded NTFS-3G could get stuck if a delayed RELEASE reply
triggered a DESTROY request via path_put().
Fix this by
a) making RELEASE requests synchronous, whenever possible, on fuseblk
filesystems
b) if not possible (triggered by an asynchronous read/write) then do
the path_put() in a separate thread with schedule_work().
Reported-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4389b6188647b4dbc84d54bbc467ddf966dcb837
Author: Don Zickus <dzickus@redhat.com>
Date: Mon Feb 7 23:25:00 2011 -0500
x86: Use u32 instead of long to set reset vector back to 0
commit 299c56966a72b9109d47c71a6db52097098703dd upstream.
A customer of ours, complained that when setting the reset
vector back to 0, it trashed other data and hung their box.
They noticed when only 4 bytes were set to 0 instead of 8,
everything worked correctly.
Mathew pointed out:
|
| We're supposed to be resetting trampoline_phys_low and
| trampoline_phys_high here, which are two 16-bit values.
| Writing 64 bits is definitely going to overwrite space
| that we're not supposed to be touching.
|
So limit the area modified to u32.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1e3b8b67525a567cbfd3d517395a5753491837ab
Author: Jochen Friedrich <jochen@scram.de>
Date: Wed Jan 26 11:30:01 2011 +0100
mfd: Fix NULL pointer due to non-initialized ucb1x00-ts absinfo
commit 9063f1f15eec35e5fd608879cef8be5728f2d12a upstream.
Call input_set_abs_params instead of manually setting absbit only.
This fixes this oops:
Unable to handle kernel NULL pointer dereference at virtual address 00000024
Internal error: Oops: 41b67017 [#1]
CPU: 0 Not tainted (2.6.37 #4)
pc : [<c016d1fc>] lr : [<00000000>] psr: 20000093
sp : c19e5f30 ip : c19e5e6c fp : c19e5f58
r10: 00000000 r9 : c19e4000 r8 : 00000003
r7 : 000001e4 r6 : 00000001 r5 : c1854400 r4 : 00000003
r3 : 00000018 r2 : 00000018 r1 : 00000018 r0 : c185447c
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: c1b6717f Table: c1b6717f DAC: 00000017
Stack: (0xc19e5f30 to 0xc19e6000)
5f20: 00000003 00000003 c1854400 00000013
5f40: 00000001 000001e4 000001c5 c19e5f80 c19e5f5c c016d5e8 c016cf5c 000001e4
5f60: c1854400 c18b5860 00000000 00000171 000001e4 c19e5fc4 c19e5f84 c01559a4
5f80: c016d584 c18b5868 00000000 c1bb5c40 c0035afc c18b5868 c18b5868 c1a55d54
5fa0: c18b5860 c0155750 00000013 00000000 00000000 00000000 c19e5ff4 c19e5fc8
5fc0: c0050174 c015575c 00000000 c18b5860 00000000 c19e5fd4 c19e5fd4 c1a55d54
5fe0: c00500f0 c003b464 00000000 c19e5ff8 c003b464 c00500fc 04000400 04000400
Backtrace:
Function entered at [<c016cf50>] from [<c016d5e8>]
Function entered at [<c016d578>] from [<c01559a4>]
r8:000001e4 r7:00000171 r6:00000000 r5:c18b5860 r4:c1854400
Function entered at [<c0155750>] from [<c0050174>]
Function entered at [<c00500f0>] from [<c003b464>]
r6:c003b464 r5:c00500f0 r4:c1a55d54
Code: e59520fc e1a03286 e0433186 e0822003 (e592000c)
>>PC; c016d1fc <input_handle_event+2ac/5a0> <=====
Trace; c016cf50 <input_handle_event+0/5a0>
Trace; c016d5e8 <input_event+70/88>
Trace; c016d578 <input_event+0/88>
Trace; c01559a4 <ucb1x00_thread+254/2dc>
Trace; c0155750 <ucb1x00_thread+0/2dc>
Trace; c0050174 <kthread+84/8c>
Trace; c00500f0 <kthread+0/8c>
Trace; c003b464 <do_exit+0/624>
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 937d443c0fdb7f09cb309409327f8282892a29c4
Author: Dave Airlie <airlied@redhat.com>
Date: Thu Feb 24 08:35:06 2011 +1000
drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
commit 1922756124ddd53846877416d92ba4a802bc658f upstream.
This fixes CVE-2011-1013.
Reported-by: Matthiew Herrb (OpenBSD X.org team)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1f4833bec35ebc1d53b5cb6eaa9b529d19691999
Author: Tristan Ye <tristan.ye@oracle.com>
Date: Fri Jan 21 18:20:18 2011 +0800
Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number.
commit acf3bb007e5636ef4c17505affb0974175108553 upstream.
Current refcounttree codes actually didn't writeback the new pages out in
write-back mode, due to a bug of always passing a ZERO number of clusters
to 'ocfs2_cow_sync_writeback', the patch tries to pass a proper one in.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 52d38a02368bb821bb1df4a55f52f65d9a9f0b85
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Sat Feb 12 14:07:57 2011 -0800
xhci: Fix an error in count_sg_trbs_needed()
commit bcd2fde05341cef0052e49566ec88b406a521cf3 upstream.
The expression
while (running_total < sg_dma_len(sg))
does not take into account that the remaining data length can be less
than sg_dma_len(sg). In that case, running_total can end up being
greater than the total data length, so an extra TRB is counted.
Changing the expression to
while (running_total < sg_dma_len(sg) && running_total < temp)
fixes that.
This patch should be queued for stable kernels back to 2.6.31.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f62d7814294e094f0d57805ff7e9d6406bdae058
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Sat Feb 12 14:07:20 2011 -0800
xhci: Fix errors in the running total calculations in the TRB math
commit 5807795bd4dececdf553719cc02869e633395787 upstream.
Calculations like
running_total = TRB_MAX_BUFF_SIZE -
(sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1));
if (running_total != 0)
num_trbs++;
are incorrect, because running_total can never be zero, so the if()
expression will never be true. I think the intention was that
running_total be in the range of 0 to TRB_MAX_BUFF_SIZE-1, not 1
to TRB_MAX_BUFF_SIZE. So adding a
running_total &= TRB_MAX_BUFF_SIZE - 1;
fixes the problem.
This patch should be queued for stable kernels back to 2.6.31.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1d143e0aeacc95efea0c2a9c058b69d0a94b628a
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Sat Feb 12 14:06:44 2011 -0800
xhci: Clarify some expressions in the TRB math
commit a2490187011cc2263117626615a581927d19f1d3 upstream.
This makes it easier to spot some problems, which will be fixed by the
next patch in the series. Also change dev_dbg to dev_err in
check_trb_math(), so any math errors will be visible even when running
with debug disabled.
Note: This patch changes the expressions containing
"((1 << TRB_MAX_BUFF_SHIFT) - 1)" to use the equivalent
"(TRB_MAX_BUFF_SIZE - 1)". No change in behavior is intended for
those expressions.
This patch should be queued for stable kernels back to 2.6.31.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 35dda5a304da9f4bc80ef35d49d015bf96ec00fb
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Sat Feb 12 14:06:06 2011 -0800
xhci: Avoid BUG() in interrupt context
commit 68e41c5d032668e2905404afbef75bc58be179d6 upstream.
Change the BUGs in xhci_find_new_dequeue_state() to WARN_ONs, to avoid
bringing down the box if one of them is hit
This patch should be queued for stable kernels back to 2.6.31.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1c3c76927b92b3c23f58a79b68efc3d15943ba30
Author: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu Feb 24 15:53:46 2011 +0100
x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems
commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 upstream.
On some SB800 systems polarity for IOAPIC pin2 is wrongly
specified as low active by BIOS. This caused system hangs after
resume from S3 when HPET was used in one-shot mode on such
systems because a timer interrupt was missed (HPET signal is
high active).
For more details see:
http://marc.info/?l=linux-kernel&m=129623757413868
Tested-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20110224145346.GD3658@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 54919a0fc2d4d7a9e42300f27fa9f3be0e0d6a75
Author: NeilBrown <neilb@suse.de>
Date: Wed Feb 16 13:58:51 2011 +1100
md: correctly handle probe of an 'mdp' device.
commit 8f5f02c460b7ca74ce55ce126ce0c1e58a3f923d upstream.
'mdp' devices are md devices with preallocated device numbers
for partitions. As such it is possible to mknod and open a partition
before opening the whole device.
this causes md_probe() to be called with a device number of a
partition, which in-turn calls mddev_find with such a number.
However mddev_find expects the number of a 'whole device' and
does the wrong thing with partition numbers.
So add code to mddev_find to remove the 'partition' part of
a device number and just work with the 'whole device'.
This patch addresses https://bugzilla.kernel.org/show_bug.cgi?id=28652
Reported-by: hkmaly@bigfoot.com
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ea08d3be6b0b8639dfa60d6803909835c9a02d49
Author: Timo Warns <Warns@pre-sense.de>
Date: Fri Feb 25 14:44:21 2011 -0800
ldm: corrupted partition table can cause kernel oops
commit 294f6cf48666825d23c9372ef37631232746e40d upstream.
The kernel automatically evaluates partition tables of storage devices.
The code for evaluating LDM partitions (in fs/partitions/ldm.c) contains
a bug that causes a kernel oops on certain corrupted LDM partitions. A
kernel subsystem seems to crash, because, after the oops, the kernel no
longer recognizes newly connected storage devices.
The patch changes ldm_parse_vmdb() to Validate the value of vblk_size.
Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: Eugene Teo <eugeneteo@kernel.sg>
Acked-by: Richard Russon <ldm@flatcap.org>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 28a92748aa4bc57d35e7b079498b0ac2e7610a37
Author: Davide Libenzi <davidel@xmailserver.org>
Date: Fri Feb 25 14:44:12 2011 -0800
epoll: prevent creating circular epoll structures
commit 22bacca48a1755f79b7e0f192ddb9fbb7fc6e64e upstream.
In several places, an epoll fd can call another file's ->f_op->poll()
method with ep->mtx held. This is in general unsafe, because that other
file could itself be an epoll fd that contains the original epoll fd.
The code defends against this possibility in its own ->poll() method using
ep_call_nested, but there are several other unsafe calls to ->poll
elsewhere that can be made to deadlock. For example, the following simple
program causes the call in ep_insert recursively call the original fd's
->poll, leading to deadlock:
#include <unistd.h>
#include <sys/epoll.h>
int main(void) {
int e1, e2, p[2];
struct epoll_event evt = {
.events = EPOLLIN
};
e1 = epoll_create(1);
e2 = epoll_create(2);
pipe(p);
epoll_ctl(e2, EPOLL_CTL_ADD, e1, &evt);
epoll_ctl(e1, EPOLL_CTL_ADD, p[0], &evt);
write(p[1], p, sizeof p);
epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt);
return 0;
}
On insertion, check whether the inserted file is itself a struct epoll,
and if so, do a recursive walk to detect whether inserting this file would
create a loop of epoll structures, which could lead to deadlock.
[nelhage@ksplice.com: Use epmutex to serialize concurrent inserts]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Reported-by: Nelson Elhage <nelhage@ksplice.com>
Tested-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fd54872c463767bed1798f6f1f2c61258aeeb91e
Author: Max Vozeler <max@vozeler.com>
Date: Wed Jan 12 15:02:05 2011 +0200
staging: usbip: vhci: use urb->dev->portnum to find port
commit 01446ef5af4e8802369bf4d257806e24345a9371 upstream.
The access to pending_port was racy when two devices
were being attached at the same time.
Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 16cf40a5c2116225d68251cc02c7092d80d067bf
Author: Max Vozeler <max@vozeler.com>
Date: Wed Jan 12 15:02:02 2011 +0200
staging: usbip: vhci: refuse to enqueue for dead connections
commit 6d212153a838354078cc7d96f9bb23b7d1fd3d1b upstream.
There can be requests to enqueue URBs while we are shutting
down a connection.
Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 68e1d43b525445cd59942646282f134d19da4c6b
Author: Max Vozeler <max@vozeler.com>
Date: Wed Jan 12 15:02:01 2011 +0200
staging: usbip: vhci: give back URBs from in-flight unlink requests
commit b92a5e23737172c52656a090977408a80d7f06d1 upstream.
If we never received a RET_UNLINK because the TCP
connection broke the pending URBs still need to be
unlinked and given back.
Previously processes would be stuck trying to kill
the URB even after the device was detached.
Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 075b4e6a982d38121250c090f7b9294314ac1b19
Author: Max Vozeler <max@vozeler.com>
Date: Wed Jan 12 15:02:00 2011 +0200
staging: usbip: vhci: update reference count for usb_device
commit 7606ee8aa33287dd3e6eb44c78541b87a413a325 upstream.
This fixes an oops observed when reading status during
removal of a device:
[ 1706.648285] general protection fault: 0000 [#1] SMP
[ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status
[ 1706.648297] CPU 1
[ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom
[ 1706.648324] Supported: Yes
[ 1706.648327] Pid: 10422, comm: usbip Tainted: G N 2.6.32.12-0.7-xen #1
[ 1706.648330] RIP: e030:[<ffffffff801b10d5>] [<ffffffff801b10d5>] strnlen+0x5/0x40
[ 1706.648340] RSP: e02b:ffff8800a994dd30 EFLAGS: 00010286
[ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002
[ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c
[ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006
[ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab
[ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa
[ 1706.648363] FS: 00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000
[ 1706.648367] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660
[ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200)
[ 1706.648385] Stack:
[ 1706.648387] ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab
[ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004
[ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000
[ 1706.648404] Call Trace:
[ 1706.648413] [<ffffffff801b28c9>] string+0x39/0xe0
[ 1706.648419] [<ffffffff801b339b>] vsnprintf+0x1eb/0x620
[ 1706.648423] [<ffffffff801b3813>] sprintf+0x43/0x50
[ 1706.648429] [<ffffffffa018d719>] show_status+0x1b9/0x220 [vhci_hcd]
[ 1706.648438] [<ffffffff8024a2b7>] dev_attr_show+0x27/0x60
[ 1706.648445] [<ffffffff80144821>] sysfs_read_file+0x101/0x1d0
[ 1706.648451] [<ffffffff800da4a7>] vfs_read+0xc7/0x130
[ 1706.648457] [<ffffffff800da613>] sys_read+0x53/0xa0
[ 1706.648462] [<ffffffff80007458>] system_call_fastpath+0x16/0x1b
[ 1706.648468] [<00007f2f2de40f30>] 0x7f2f2de40f30
[ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83
[ 1706.648507] RIP [<ffffffff801b10d5>] strnlen+0x5/0x40
[ 1706.648511] RSP <ffff8800a994dd30>
[ 1706.649575] ---[ end trace b4eb72bf2e149593 ]---
Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bd9537501670b2dae4df632b8e126e60d11e548d
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri Feb 18 22:35:56 2011 +0000
tcp: fix inet_twsk_deschedule()
commit 91035f0b7d89291af728b6f3e370c3be58fcbe1b upstream.
Eric W. Biederman reported a lockdep splat in inet_twsk_deschedule()
This is caused by inet_twsk_purge(), run from process context,
and commit 575f4cd5a5b6394577 (net: Use rcu lookups in inet_twsk_purge.)
removed the BH disabling that was necessary.
Add the BH disabling but fine grained, right before calling
inet_twsk_deschedule(), instead of whole function.
With help from Linus Torvalds and Eric W. Biederman
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Daniel Lezcano <daniel.lezcano@free.fr>
CC: Pavel Emelyanov <xemul@openvz.org>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 38821aad074e2a35333d0765e8ae2605f20a7608
Author: Alex Deucher <alexdeucher@gmail.com>
Date: Mon Feb 21 01:11:59 2011 -0500
Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"
commit bd6a60afeb4c9ada3ff27f1d13db1a2b5c11d8c0 upstream.
This reverts commit a6f9761743bf35b052180f4a8bdae4d2cc0465f6.
Remove this commit as it is no longer necessary. The relevant bugs
were fixed properly in:
drm/radeon/kms: hopefully fix pll issues for real (v3)
5b40ddf888398ce4cccbf3b9d0a18d90149ed7ff
drm/radeon/kms: add missing frac fb div flag for dce4+
9f4283f49f0a96a64c5a45fe56f0f8c942885eef
This commit also broke certain ~5 Mhz modes on old arcade monitors,
so reverting this commit fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=29502
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4f621cb1fec1309fce287a85ba89fed273aef429
Author: Christian Lamparter <chunkeey@googlemail.com>
Date: Fri Feb 11 01:48:42 2011 +0100
p54pci: update receive dma buffers before and after processing
commit 0bf719dfdecc5552155cbec78e49fa06e531e35c upstream.
Documentation/DMA-API-HOWTO.txt states:
"DMA transfers need to be synced properly in order for
the cpu and device to see the most uptodate and correct
copy of the DMA buffer."
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8ed9cf293b7b5b6530afd1b80ec86b5f649ba51f
Author: Jon Thomas <jthomas@redhat.com>
Date: Wed Feb 16 11:02:34 2011 -0500
sierra: add new ID for Airprime/Sierra USB IP modem
commit e1dc5157c574e7249dc1cd072fde2e48b3011533 upstream.
I picked up a new Sierra usb 308 (At&t Shockwave) on 2/2011 and the vendor code
is 0x0f3d
Looking up vendor and product id's I see:
0f3d Airprime, Incorporated
0112 CDMA 1xEVDO PC Card, PC 5220
Sierra and Airprime are somehow related and I'm guessing the At&t usb 308 might
be have some common hardware with the AirPrime SL809x.
Signed-off-by: Jon Thomas <jthomas@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ea28b8480420d2ec513646bc54e5193eaaa1eb0f
Author: Maciej Szmigiero <mhej@o2.pl>
Date: Sat Feb 5 21:52:00 2011 +0100
USB: Add quirk for Samsung Android phone modem
commit 72a012ce0a02c6c616676a24b40ff81d1aaeafda upstream.
My Galaxy Spica needs this quirk when in modem mode, otherwise
it causes endless USB bus resets and is unusable in this mode.
Unfortunately Samsung decided to reuse ID of its old CDMA phone SGH-I500
for the modem part.
That's why in addition to this patch the visor driver must be prevented
from binding to SPH-I500 ID, so ACM driver can do that.
Signed-off-by: Maciej Szmigiero <mhej@o2.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit deb17af455cd0996b761acfac98655b0be7622b3
Author: Maciej Szmigiero <mhej@o2.pl>
Date: Mon Feb 7 12:42:36 2011 +0100
USB: Add Samsung SGH-I500/Android modem ID switch to visor driver
commit acb52cb1613e1d3c8a8c650717cc51965c60d7d4 upstream.
[USB]Add Samsung SGH-I500/Android modem ID switch to visor driver
Samsung decided to reuse USB ID of its old CDMA phone SGH-I500 for the
modem part of some of their Android phones. At least Galaxy Spica
is affected.
This modem needs ACM driver and does not work with visor driver which
binds the conflicting ID for SGH-I500.
Because SGH-I500 is pretty an old hardware its best to add switch to
visor
driver in cause somebody still wants to use that phone with Linux.
Note that this is needed only when using the Android phone as modem,
not in USB storage or ADB mode.
Signed-off-by: Maciej Szmigiero <mhej@o2.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c2173f627fc65c9f23059c4e03a92935deaeebd5
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Thu Feb 17 10:26:38 2011 -0500
USB: add quirks entry for Keytouch QWERTY Panel
commit 3c18e30f87ac5466bddbb05cf955605efd7db025 upstream.
This patch (as1448) adds a quirks entry for the Keytouch QWERTY Panel
firmware, used in the IEC 60945 keyboard. This device crashes during
enumeration when the computer asks for its configuration string
descriptor.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: kholis <nur.kholis.majid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2886f7d272ab59f67546b05b1e3fc1da529479b9
Author: Johan Hovold <jhovold@gmail.com>
Date: Fri Feb 11 16:57:08 2011 +0100
usb: musb: omap2430: fix kernel panic on reboot
commit b193b412e62b134adf69af286c7e7f8e99259350 upstream.
Cancel idle timer in musb_platform_exit.
The idle timer could trigger after clock had been disabled leading to
kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37.
The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled
later, and only if compiled as a module, and the offending memory access
has moved) but the timer should be cancelled nonetheless.
Rebooting... musb_hdrc musb_hdrc: remove, state 4
usb usb1: USB disconnect, address 1
musb_hdrc musb_hdrc: USB bus 1 deregistered
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060
Internal error: : 1028 [#1] PREEMPT
last sysfs file: /sys/kernel/uevent_seqnum
Modules linked in:
CPU: 0 Not tainted (2.6.37+ #6)
PC is at musb_do_idle+0x24/0x138
LR is at musb_do_idle+0x18/0x138
pc : [<c02377d8>] lr : [<c02377cc>] psr: 80000193
sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c
r10: c048a60c r9 : c048a40c r8 : cf85e110
r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110
r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000
Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c5387d Table: 8faac019 DAC: 00000015
Process reboot (pid: 769, stack limit = 0xcf2bc2f0)
Stack: (0xcf2bdd80 to 0xcf2be000)
dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8
dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000
ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c
dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000
de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608
de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8
de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8
de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c
de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c
dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8
dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000
dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08
df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18
df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28
df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08
df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80
df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004
dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000
dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001
dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000
[<c02377d8>] (musb_do_idle+0x24/0x138) from [<c005fa34>] (run_timer_softirq+0x1a8/0x26)
[<c005fa34>] (run_timer_softirq+0x1a8/0x26c) from [<c005ac14>] (__do_softirq+0x88/0x13)
[<c005ac14>] (__do_softirq+0x88/0x138) from [<c005ad08>] (irq_exit+0x44/0x98)
[<c005ad08>] (irq_exit+0x44/0x98) from [<c002e07c>] (asm_do_IRQ+0x7c/0xa0)
[<c002e07c>] (asm_do_IRQ+0x7c/0xa0) from [<c0033608>] (__irq_svc+0x48/0xa8)
Exception stack(0xcf2bde20 to 0xcf2bde68)
de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8
de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8
de60: 60000013 ffffffff
[<c0033608>] (__irq_svc+0x48/0xa8) from [<c004f7d8>] (sub_preempt_count+0x0/0xb8)
Code: ebf86030 e5940098 e594108c e5902010 (e5d13060)
---[ end trace 3689c0d808f9bf7c ]---
Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 64710ba6e96f1c6cca73207a2c9306d53a5f90d1
Author: Vasiliy Kulikov <segoon@openwall.com>
Date: Fri Feb 4 15:24:03 2011 +0300
platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
commit 8a6a142c1286797978e4db266d22875a5f424897 upstream.
Don't allow everybody to change WMI settings.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2b0d44ee2fd6057d15f9415e09a2ddd5f3289517
Author: Vasiliy Kulikov <segoon@openwall.com>
Date: Fri Feb 4 15:23:59 2011 +0300
platform: x86: asus_acpi: world-writable procfs files
commit 8040835760adf0ef66876c063d47f79f015fb55d upstream.
Don't allow everybody to change ACPI settings. The comment says that it
is done deliberatelly, however, the comment before disp_proc_write()
says that at least one of these setting is experimental.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c752d4bb18aff38e932110f271babc58d3cfe8eb
Author: Vasiliy Kulikov <segoon@openwall.com>
Date: Fri Feb 4 15:23:56 2011 +0300
platform: x86: acer-wmi: world-writable sysfs threeg file
commit b80b168f918bba4b847e884492415546b340e19d upstream.
Don't allow everybody to write to hardware registers.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 493ceb7495f540df969e8a6dae084485c7148013
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Fri Feb 18 23:27:23 2011 +0100
genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for now
commit 6d83f94db95cfe65d2a6359cccdf61cf087c2598 upstream.
With CONFIG_SHIRQ_DEBUG=y we call a newly installed interrupt handler
in request_threaded_irq().
The original implementation (commit a304e1b8) called the handler
_BEFORE_ it was installed, but that caused problems with handlers
calling disable_irq_nosync(). See commit 377bf1e4.
It's braindead in the first place to call disable_irq_nosync in shared
handlers, but ....
Moving this call after we installed the handler looks innocent, but it
is very subtle broken on SMP.
Interrupt handlers rely on the fact, that the irq core prevents
reentrancy.
Now this debug call violates that promise because we run the handler
w/o the IRQ_INPROGRESS protection - which we cannot apply here because
that would result in a possibly forever masked interrupt line.
A concurrent real hardware interrupt on a different CPU results in
handler reentrancy and can lead to complete wreckage, which was
unfortunately observed in reality and took a fricking long time to
debug.
Leave the code here for now. We want this debug feature, but that's
not easy to fix. We really should get rid of those
disable_irq_nosync() abusers and remove that function completely.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3cb905a9fcaf1f33feb3593e2b00df3b03405f4e
Author: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Tue Jan 11 12:43:42 2011 -0600
eCryptfs: Copy up lower inode attrs in getattr
commit 55f9cf6bbaa682958a7dd2755f883b768270c3ce upstream.
The lower filesystem may do some type of inode revalidation during a
getattr call. eCryptfs should take advantage of that by copying the
lower inode attributes to the eCryptfs inode after a call to
vfs_getattr() on the lower inode.
I originally wrote this fix while working on eCryptfs on nfsv3 support,
but discovered it also fixed an eCryptfs on ext4 nanosecond timestamp
bug that was reported.
https://bugs.launchpad.net/bugs/613873
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 168f7a99fcd92f46e643e165f752150e537e1588
Author: Matthew Garrett <mjg@redhat.com>
Date: Wed Feb 9 16:39:40 2011 -0500
acer-wmi: Fix capitalisation of GUID
commit bbb706079abe955a9e3f208f541de97d99449236 upstream.
6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3 needs to be
6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 to match the hardware alias.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e10f8b1c1104d1304c16c238235b1bc6e37f563c
Author: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun Feb 20 12:22:52 2011 +0000
ARM: Ensure predictable endian state on signal handler entry
commit 53399053eb505cf541b2405bd9d9bca5ecfb96fb upstream.
Ensure a predictable endian state when entering signal handlers. This
avoids programs which use SETEND to momentarily switch their endian
state from having their signal handlers entered with an unpredictable
endian state.
Acked-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 717587acd84b74c24a16cc11f61777c259ea5c54
Author: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun Jan 16 10:09:13 2011 -0300
radio-aimslab.c needs #include <linux/delay.h>
commit 2400982a2e8a8e4e95f0a0e1517bbe63cc88038f upstream.
Commit e3c92215198cb6aa00ad38db2780faa6b72e0a3f ("[media] radio-aimslab.c: Fix
gcc 4.5+ bug") removed the include, but introduced new callers of msleep():
| drivers/media/radio/radio-aimslab.c: In function ‘rt_decvol’:
| drivers/media/radio/radio-aimslab.c:76: error: implicit declaration of function ‘msleep’
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: dann frazier <dannf@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 20e513d2753cc8172f478b8d0eec4375f3a090e7
Author: Takashi Iwai <tiwai@suse.de>
Date: Mon Feb 14 22:45:59 2011 +0100
ALSA: caiaq - Fix possible string-buffer overflow
commit eaae55dac6b64c0616046436b294e69fc5311581 upstream.
Use strlcpy() to assure not to overflow the string array sizes by
too long USB device name string.
Reported-by: Rafa <rafa@mwrinfosecurity.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b81e7b0ea0bfd2d5ff65f8a4702ea9c751f1d7f1
Author: David Henningsson <david.henningsson@canonical.com>
Date: Mon Feb 14 20:27:44 2011 +0100
ALSA: HDA: Add position_fix quirk for an Asus device
commit b540afc2b3d6e4cd1d1f137ef6d9e9c78d67fecd upstream.
The bug reporter claims that position_fix=1 is needed for his
microphone to work. The controller PCI vendor-id is [1002:4383] (rev 40).
Reported-by: Kjell L.
BugLink: http://bugs.launchpad.net/bugs/718402
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6512cf6e927885eab153868b8daba1ecb53f3267
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu Feb 17 22:59:19 2011 +0000
net: deinit automatic LIST_HEAD
commit ceaaec98ad99859ac90ac6863ad0a6cd075d8e0e upstream.
commit 9b5e383c11b08784 (net: Introduce
unregister_netdevice_many()) left an active LIST_HEAD() in
rollback_registered(), with possible memory corruption.
Even if device is freed without touching its unreg_list (and therefore
touching the previous memory location holding LISTE_HEAD(single), better
close the bug for good, since its really subtle.
(Same fix for default_device_exit_batch() for completeness)
Reported-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Eric W. Biderman <ebiderman@xmission.com>
Tested-by: Eric W. Biderman <ebiderman@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9cab3cdd60c929dfe4c5ce641a2530fe8b27a89d
Author: Timo Warns <warns@pre-sense.de>
Date: Thu Feb 17 22:27:40 2011 +0100
fs/partitions: Validate map_count in Mac partition tables
commit fa7ea87a057958a8b7926c1a60a3ca6d696328ed upstream.
Validate number of blocks in map and remove redundant variable.
Signed-off-by: Timo Warns <warns@pre-sense.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 92a79fb1843f5af48a7d80efde9852450e2ecc5f
Author: Stanislaw Gruszka <stf_xl@pop3.wp.pl>
Date: Sat Feb 12 21:06:51 2011 +0100
PM / Hibernate: Return error code when alloc_image_page() fails
commit 2e725a065b0153f0c449318da1923a120477633d upstream.
Currently we return 0 in swsusp_alloc() when alloc_image_page() fails.
Fix that. Also remove unneeded "error" variable since the only
useful value of error is -ENOMEM.
[rjw: Fixed up the changelog and changed subject.]
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3393d8f7f8282ec1a154b8df502d7f0ca142ba31
Author: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue Feb 15 09:43:32 2011 +0100
s390: remove task_show_regs
commit 261cd298a8c363d7985e3482946edb4bfedacf98 upstream.
task_show_regs used to be a debugging aid in the early bringup days
of Linux on s390. /proc/<pid>/status is a world readable file, it
is not a good idea to show the registers of a process. The only
correct fix is to remove task_show_regs.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6af40f1c9359c9c795b68a0ae7be4f49e6f95e67
Author: NeilBrown <neilb@suse.de>
Date: Wed Feb 16 13:08:35 2011 +1100
nfsd: correctly handle return value from nfsd_map_name_to_*
commit 47c85291d3dd1a51501555000b90f8e281a0458e upstream.
These functions return an nfs status, not a host_err. So don't
try to convert before returning.
This is a regression introduced by
3c726023402a2f3b28f49b9d90ebf9e71151157d; I fixed up two of the callers,
but missed these two.
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bf9a5b3f21bb693155c9f890efad91975a318300
Author: David S. Miller <davem@davemloft.net>
Date: Wed Nov 24 11:47:22 2010 -0800
tcp: Make TCP_MAXSEG minimum more correct.
commit c39508d6f118308355468314ff414644115a07f3 upstream.
Use TCP_MIN_MSS instead of constant 64.
Reported-by: Min Zhang <mzhang@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fefec0cbd52b128b2b4d57c71eb6b54000039e33
Author: David S. Miller <davem@davemloft.net>
Date: Wed Nov 10 21:35:37 2010 -0800
tcp: Increase TCP_MAXSEG socket option minimum.
commit 7a1abd08d52fdeddb3e9a5a33f2f15cc6a5674d2 upstream.
As noted by Steve Chen, since commit
f5fff5dc8a7a3f395b0525c02ba92c95d42b7390 ("tcp: advertise MSS
requested by user") we can end up with a situation where
tcp_select_initial_window() does a divide by a zero (or
even negative) mss value.
The problem is that sometimes we effectively subtract
TCPOLEN_TSTAMP_ALIGNED and/or TCPOLEN_MD5SIG_ALIGNED from the mss.
Fix this by increasing the minimum from 8 to 64.
Reported-by: Steve Chen <schen@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit af25a83d14fd4d66e68bb28b9e0c3b60382025f2
Author: Ajit Khaparde <ajitkhaparde@gmail.com>
Date: Fri Feb 19 13:57:12 2010 +0000
be2net: Maintain tx and rx counters in driver
commit 91992e446cadbbde1a304de6954afd715af5121e upstream.
For certain skews of the BE adapter, H/W Tx and Rx
counters could be common for more than one interface.
Add Tx and Rx counters in the adapter structure
(to maintain stats on a per interfae basis).
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit cffffe24025c34c22f9a13d6a1ad817401e5d824
Author: Li Zefan <lizf@cn.fujitsu.com>
Date: Thu Mar 11 14:08:10 2010 -0800
sunrpc/cache: fix module refcnt leak in a failure path
commit a5990ea1254cd186b38744507aeec3136a0c1c95 upstream.
Don't forget to release the module refcnt if seq_open() returns failure.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 37f7d55cdf298cca1da8f881d3cbf4eba1d3ba88
Author: Brian King <brking@linux.vnet.ibm.com>
Date: Fri Feb 19 10:08:31 2010 -0600
scsi_dh_alua: Add IBM Power Virtual SCSI ALUA device to dev list
commit 22963a37b3437a25812cc856afa5a84ad4a3f541 upstream.
Adds IBM Power Virtual SCSI ALUA devices to the ALUA device handler.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c1b07e9ca5a83e678e60ab5c08d26273e8fffa60
Author: Mike Christie <michaelc@cs.wisc.edu>
Date: Thu Feb 18 17:32:03 2010 -0600
scsi_dh_alua: add netapp to dev list
commit cd4a8814d44672bd2c8f04a472121bfbe193809c upstream.
Newer Netapp target software supports ALUA, so
this patch adds them to the scsi_dev_alua dev list.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ecd28df16abedcd61fbd94921a514c13948c2390
Author: Milton Miller <miltonm@bga.com>
Date: Fri Feb 19 17:44:42 2010 +0000
ixgbe: prevent speculative processing of descriptors before ready
commit 3c945e5b3719bcc18c6ddd31bbcae8ef94f3d19a upstream.
The PowerPC architecture does not require loads to independent bytes to be
ordered without adding an explicit barrier.
In ixgbe_clean_rx_irq we load the status bit then load the packet data.
With packet split disabled if these loads go out of order we get a
stale packet, but we will notice the bad sequence numbers and drop it.
The problem occurs with packet split enabled where the TCP/IP header and data
are in different descriptors. If the reads go out of order we may have data
that doesn't match the TCP/IP header. Since we use hardware checksumming this
bad data is never verified and it makes it all the way to the application.
This bug was found during stress testing and adding this barrier has been shown
to fix it.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b584b3505db0b94c231014a6d3aa3c5a72298660
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Wed Sep 29 22:16:36 2010 +0200
isdn: hisax: Replace the bogus access to irq stats
commit 40f08a724fcc21285cf3a75aec957aef908605c6 upstream.
Abusing irq stats in a driver for counting interrupts is a horrible
idea and not safe with shared interrupts. Replace it by a local
interrupt counter.
Noticed by the attempt to remove the irq stats export.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: maximilian attems <max@stro.at>
commit b1d02fe72b50877d5d106b1bafa5d908bbcfa68b
Author: J. R. Okajima <hooanon05@yahoo.co.jp>
Date: Wed Aug 11 13:10:16 2010 -0400
NFS: fix the return value of nfs_file_fsync()
commit 0702099bd86c33c2dcdbd3963433a61f3f503901 upstream.
By the commit af7fa16 2010-08-03 NFS: Fix up the fsync code
close(2) became returning the non-zero value even if it went well.
nfs_file_fsync() should return 0 when "status" is positive.
Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8f2f330a85acad0e2eb6d8529ccde763ed49548a
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Mon Feb 7 13:36:16 2011 +0000
CRED: Fix memory and refcount leaks upon security_prepare_creds() failure
commit fb2b2a1d37f80cc818fd4487b510f4e11816e5e1 upstream.
In prepare_kernel_cred() since 2.6.29, put_cred(new) is called without
assigning new->usage when security_prepare_creds() returned an error. As a
result, memory for new and refcount for new->{user,group_info,tgcred} are
leaked because put_cred(new) won't call __put_cred() unless old->usage == 1.
Fix these leaks by assigning new->usage (and new->subscribers which was added
in 2.6.32) before calling security_prepare_creds().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fbca9e285c0131b2182c34aaf6836858483e5339
Author: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Mon Feb 7 13:36:10 2011 +0000
CRED: Fix BUG() upon security_cred_alloc_blank() failure
commit 2edeaa34a6e3f2c43b667f6c4f7b27944b811695 upstream.
In cred_alloc_blank() since 2.6.32, abort_creds(new) is called with
new->security == NULL and new->magic == 0 when security_cred_alloc_blank()
returns an error. As a result, BUG() will be triggered if SELinux is enabled
or CONFIG_DEBUG_CREDENTIALS=y.
If CONFIG_DEBUG_CREDENTIALS=y, BUG() is called from __invalid_creds() because
cred->magic == 0. Failing that, BUG() is called from selinux_cred_free()
because selinux_cred_free() is not expecting cred->security == NULL. This does
not affect smack_cred_free(), tomoyo_cred_free() or apparmor_cred_free().
Fix these bugs by
(1) Set new->magic before calling security_cred_alloc_blank().
(2) Handle null cred->security in creds_are_invalid() and selinux_cred_free().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 22047f7542d6d7f7fa7860d5193bc5be2f0f1221
Author: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Date: Fri Feb 4 18:13:24 2011 +0000
CRED: Fix kernel panic upon security_file_alloc() failure.
commit 78d2978874e4e10e97dfd4fd79db45bdc0748550 upstream.
In get_empty_filp() since 2.6.29, file_free(f) is called with f->f_cred == NULL
when security_file_alloc() returned an error. As a result, kernel will panic()
due to put_cred(NULL) call within RCU callback.
Fix this bug by assigning f->f_cred before calling security_file_alloc().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 006c514c67d28b1242e29fa89061cb4201f776eb
Author: David Howells <dhowells@redhat.com>
Date: Thu Jul 29 12:45:49 2010 +0100
CRED: Fix get_task_cred() and task_state() to not resurrect dead credentials
commit de09a9771a5346029f4d11e4ac886be7f9bfdd75 upstream.
It's possible for get_task_cred() as it currently stands to 'corrupt' a set of
credentials by incrementing their usage count after their replacement by the
task being accessed.
What happens is that get_task_cred() can race with commit_creds():
TASK_1 TASK_2 RCU_CLEANER
-->get_task_cred(TASK_2)
rcu_read_lock()
__cred = __task_cred(TASK_2)
-->commit_creds()
old_cred = TASK_2->real_cred
TASK_2->real_cred = ...
put_cred(old_cred)
call_rcu(old_cred)
[__cred->usage == 0]
get_cred(__cred)
[__cred->usage == 1]
rcu_read_unlock()
-->put_cred_rcu()
[__cred->usage == 1]
panic()
However, since a tasks credentials are generally not changed very often, we can
reasonably make use of a loop involving reading the creds pointer and using
atomic_inc_not_zero() to attempt to increment it if it hasn't already hit zero.
If successful, we can safely return the credentials in the knowledge that, even
if the task we're accessing has released them, they haven't gone to the RCU
cleanup code.
We then change task_state() in procfs to use get_task_cred() rather than
calling get_cred() on the result of __task_cred(), as that suffers from the
same problem.
Without this change, a BUG_ON in __put_cred() or in put_cred_rcu() can be
tripped when it is noticed that the usage count is not zero as it ought to be,
for example:
kernel BUG at kernel/cred.c:168!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/kernel/mm/ksm/run
CPU 0
Pid: 2436, comm: master Not tainted 2.6.33.3-85.fc13.x86_64 #1 0HR330/OptiPlex
745
RIP: 0010:[<ffffffff81069881>] [<ffffffff81069881>] __put_cred+0xc/0x45
RSP: 0018:ffff88019e7e9eb8 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff880161514480 RCX: 00000000ffffffff
RDX: 00000000ffffffff RSI: ffff880140c690c0 RDI: ffff880140c690c0
RBP: ffff88019e7e9eb8 R08: 00000000000000d0 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000040 R12: ffff880140c690c0
R13: ffff88019e77aea0 R14: 00007fff336b0a5c R15: 0000000000000001
FS: 00007f12f50d97c0(0000) GS:ffff880007400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8f461bc000 CR3: 00000001b26ce000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process master (pid: 2436, threadinfo ffff88019e7e8000, task ffff88019e77aea0)
Stack:
ffff88019e7e9ec8 ffffffff810698cd ffff88019e7e9ef8 ffffffff81069b45
<0> ffff880161514180 ffff880161514480 ffff880161514180 0000000000000000
<0> ffff88019e7e9f28 ffffffff8106aace 0000000000000001 0000000000000246
Call Trace:
[<ffffffff810698cd>] put_cred+0x13/0x15
[<ffffffff81069b45>] commit_creds+0x16b/0x175
[<ffffffff8106aace>] set_current_groups+0x47/0x4e
[<ffffffff8106ac89>] sys_setgroups+0xf6/0x105
[<ffffffff81009b02>] system_call_fastpath+0x16/0x1b
Code: 48 8d 71 ff e8 7e 4e 15 00 85 c0 78 0b 8b 75 ec 48 89 df e8 ef 4a 15 00
48 83 c4 18 5b c9 c3 55 8b 07 8b 07 48 89 e5 85 c0 74 04 <0f> 0b eb fe 65 48 8b
04 25 00 cc 00 00 48 3b b8 58 04 00 00 75
RIP [<ffffffff81069881>] __put_cred+0xc/0x45
RSP <ffff88019e7e9eb8>
---[ end trace df391256a100ebdd ]---
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f8d85f781b6f24384fdfbcd81e083f84af630474
Author: Dan Carpenter <error27@gmail.com>
Date: Fri Jan 7 16:41:54 2011 -0300
av7110: check for negative array offset
commit cb26a24ee9706473f31d34cc259f4dcf45cd0644 upstream.
info->num comes from the user. It's type int. If the user passes
in a negative value that would cause memory corruption.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 132a10e37130f769046d68fa36306c940c981869
Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon Oct 25 16:53:46 2010 -0700
x86/pvclock: Zero last_value on resume
commit e7a3481c0246c8e45e79c629efd63b168e91fcda upstream.
If the guest domain has been suspend/resumed or migrated, then the
system clock backing the pvclock clocksource may revert to a smaller
value (ie, can be non-monotonic across the migration/save-restore).
Make sure we zero last_value in that case so that the domain
continues to see clock updates.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 267be76c7ce0edf9e443c0654786bf2221dcadd6
Author: Apollon Oikonomopoulos <apollon@noc.grnet.gr>
Date: Tue Dec 7 09:43:30 2010 +0000
x25: decrement netdev reference counts on unload
commit 171995e5d82dcc92bea37a7d2a2ecc21068a0f19 upstream.
x25 does not decrement the network device reference counts on module unload.
Thus unregistering any pre-existing interface after unloading the x25 module
hangs and results in
unregister_netdevice: waiting for tap0 to become free. Usage count = 1
This patch decrements the reference counts of all interfaces in x25_link_free,
the way it is already done in x25_link_device_down for NETDEV_DOWN events.
Signed-off-by: Apollon Oikonomopoulos <apollon@noc.grnet.gr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5aab0d7a20e4dca3268888c81ffa960531388347
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Mon Sep 27 12:30:28 2010 -0400
Fix pktcdvd ioctl dev_minor range check
commit 252a52aa4fa22a668f019e55b3aac3ff71ec1c29 upstream.
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a
pktcdvd_device from the global pkt_devs array. The index into this
array is provided directly by the user and is a signed integer, so the
comparison to ensure that it falls within the bounds of this array will
fail when provided with a negative index.
This can be used to read arbitrary kernel memory or cause a crash due to
an invalid pointer dereference. This can be exploited by users with
permission to open /dev/pktcdvd/control (on many distributions, this is
readable by group "cdrom").
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
[ Rather than add a cast, just make the function take the right type -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2bc3c404decf406bfadd88001945bc2673fc6e4f
Author: dann frazier <dann.frazier@canonical.com>
Date: Thu Nov 18 15:03:09 2010 -0700
ocfs2_connection_find() returns pointer to bad structure
commit 226291aa4641fa13cb5dec3bcb3379faa83009e2 upstream.
If ocfs2_live_connection_list is empty, ocfs2_connection_find() will return
a pointer to the LIST_HEAD, cast as a ocfs2_live_connection. This can cause
an oops when ocfs2_control_send_down() dereferences c->oc_conn:
Call Trace:
[<ffffffffa00c2a3c>] ocfs2_control_message+0x28c/0x2b0 [ocfs2_stack_user]
[<ffffffffa00c2a95>] ocfs2_control_write+0x35/0xb0 [ocfs2_stack_user]
[<ffffffff81143a88>] vfs_write+0xb8/0x1a0
[<ffffffff8155cc13>] ? do_page_fault+0x153/0x3b0
[<ffffffff811442f1>] sys_write+0x51/0x80
[<ffffffff810121b2>] system_call_fastpath+0x16/0x1b
Fix by explicitly returning NULL if no match is found.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 57c247a86588c5602e26367728be7fd61d3b334a
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Fri Oct 1 11:51:47 2010 +0000
sctp: Fix out-of-bounds reading in sctp_asoc_get_hmac()
commit 51e97a12bef19b7e43199fc153cf9bd5f2140362 upstream.
The sctp_asoc_get_hmac() function iterates through a peer's hmac_ids
array and attempts to ensure that only a supported hmac entry is
returned. The current code fails to do this properly - if the last id
in the array is out of range (greater than SCTP_AUTH_HMAC_ID_MAX), the
id integer remains set after exiting the loop, and the address of an
out-of-bounds entry will be returned and subsequently used in the parent
function, causing potentially ugly memory corruption. This patch resets
the id integer to 0 on encountering an invalid id so that NULL will be
returned after finishing the loop if no valid ids are found.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 23c49826ab1e94a05c1b4c726afb6cd24c8704e2
Author: Kashyap, Desai <kashyap.desai@lsi.com>
Date: Thu Feb 10 11:53:44 2011 +0530
mptfusion: Fix Incorrect return value in mptscsih_dev_reset
commit bcfe42e98047f1935c5571c8ea77beb2d43ec19d upstream.
There's a branch at the end of this function that
is supposed to normalize the return value with what
the mid-layer expects. In this one case, we get it wrong.
Also increase the verbosity of the INFO level printk
at the end of mptscsih_abort to include the actual return value
and the scmd->serial_number. The reason being success
or failure is actually determined by the state of
the internal tag list when a TMF is issued, and not the
return value of the TMF cmd. The serial_number is also
used in this decision, thus it's useful to know for debugging
purposes.
Reported-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1bf4c7636f2d3b3491c6366a981b2b56bb5c8afc
Author: Kashyap, Desai <kashyap.desai@lsi.com>
Date: Thu Feb 10 11:52:21 2011 +0530
mptfusion: mptctl_release is required in mptctl.c
commit 84857c8bf83e8aa87afc57d2956ba01f11d82386 upstream.
Added missing release callback for file_operations mptctl_fops.
Without release callback there will be never freed. It remains on
mptctl's eent list even after the file is closed and released.
Relavent RHEL bugzilla is 660871
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 74d2a55a8bc405f5f28cf471e0a463f62eaf54d2
Author: Konstantin Khorenko <khorenko@parallels.com>
Date: Tue Feb 1 17:16:29 2011 +0300
NFSD: memory corruption due to writing beyond the stat array
commit 3aa6e0aa8ab3e64bbfba092c64d42fd1d006b124 upstream.
If nfsd fails to find an exported via NFS file in the readahead cache, it
should increment corresponding nfsdstats counter (ra_depth[10]), but due to a
bug it may instead write to ra_depth[11], corrupting the following field.
In a kernel with NFSDv4 compiled in the corruption takes the form of an
increment of a counter of the number of NFSv4 operation 0's received; since
there is no operation 0, this is harmless.
In a kernel with NFSDv4 disabled it corrupts whatever happens to be in the
memory beyond nfsdstats.
Signed-off-by: Konstantin Khorenko <khorenko@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c8a3f6e5a73553f3d3ced5f9d0529e367d4609a1
Author: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Date: Thu Dec 23 11:12:42 2010 -0800
usb: Realloc xHCI structures after a hub is verified.
commit 653a39d1f61bdc9f277766736d21d2e9be0391cb upstream.
When there's an xHCI host power loss after a suspend from memory, the USB
core attempts to reset and verify the USB devices that are attached to the
system. The xHCI driver has to reallocate those devices, since the
hardware lost all knowledge of them during the power loss.
When a hub is plugged in, and the host loses power, the xHCI hardware
structures are not updated to say the device is a hub. This is usually
done in hub_configure() when the USB hub is detected. That function is
skipped during a reset and verify by the USB core, since the core restores
the old configuration and alternate settings, and the hub driver has no
idea this happened. This bug makes the xHCI host controller reject the
enumeration of low speed devices under the resumed hub.
Therefore, make the USB core re-setup the internal xHCI hub device
information by calling update_hub_device() when hub_activate() is called
for a hub reset resume. After a host power loss, all devices under the
roothub get a reset-resume or a disconnect.
This patch should be queued for the 2.6.37 stable tree.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0bff213e8a2e779175998d6187429922b59f8369
Author: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Thu Feb 3 12:20:04 2011 -0800
x86, mm: avoid possible bogus tlb entries by clearing prev mm_cpumask after switching mm
commit 831d52bc153971b70e64eccfbed2b232394f22f8 upstream.
Clearing the cpu in prev's mm_cpumask early will avoid the flush tlb
IPI's while the cr3 is still pointing to the prev mm. And this window
can lead to the possibility of bogus TLB fills resulting in strange
failures. One such problematic scenario is mentioned below.
T1. CPU-1 is context switching from mm1 to mm2 context and got a NMI
etc between the point of clearing the cpu from the mm_cpumask(mm1)
and before reloading the cr3 with the new mm2.
T2. CPU-2 is tearing down a specific vma for mm1 and will proceed with
flushing the TLB for mm1. It doesn't send the flush TLB to CPU-1
as it doesn't see that cpu listed in the mm_cpumask(mm1).
T3. After the TLB flush is complete, CPU-2 goes ahead and frees the
page-table pages associated with the removed vma mapping.
T4. CPU-2 now allocates those freed page-table pages for something
else.
T5. As the CR3 and TLB caches for mm1 is still active on CPU-1, CPU-1
can potentially speculate and walk through the page-table caches
and can insert new TLB entries. As the page-table pages are
already freed and being used on CPU-2, this page walk can
potentially insert a bogus global TLB entry depending on the
(random) contents of the page that is being used on CPU-2.
T6. This bogus TLB entry being global will be active across future CR3
changes and can result in weird memory corruption etc.
To avoid this issue, for the prev mm that is handing over the cpu to
another mm, clear the cpu from the mm_cpumask(prev) after the cr3 is
changed.
Marking it for -stable, though we haven't seen any reported failure that
can be attributed to this.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2a3664f6a6939d0add4e447eb0264126e2f7be2b
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jan 20 10:03:24 2011 +0000
drm/i915: Add dependency on CONFIG_TMPFS
commit f7ab9b407b3bc83161c2aa74c992ba4782e87c9c upstream.
Without tmpfs, shmem_readpage() is not compiled in causing an OOPS as
soon as we try to allocate some swappable pages for GEM.
Jan 19 22:52:26 harlie kernel: Modules linked in: i915(+) drm_kms_helper cfbcopyarea video backlight cfbimgblt cfbfillrect
Jan 19 22:52:26 harlie kernel:
Jan 19 22:52:26 harlie kernel: Pid: 1125, comm: modprobe Not tainted 2.6.37Harlie #10 To be filled by O.E.M./To be filled by O.E.M.
Jan 19 22:52:26 harlie kernel: EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 3
Jan 19 22:52:26 harlie kernel: EIP is at 0x0
Jan 19 22:52:26 harlie kernel: EAX: 00000000 EBX: f7b7d000 ECX: f3383100 EDX: f7b7d000
Jan 19 22:52:26 harlie kernel: ESI: f1456118 EDI: 00000000 EBP: f2303c98 ESP: f2303c7c
Jan 19 22:52:26 harlie kernel: DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Jan 19 22:52:26 harlie kernel: Process modprobe (pid: 1125, ti=f2302000 task=f259cd80 task.ti=f2302000)
Jan 19 22:52:26 harlie kernel: Stack:
Jan 19 22:52:26 harlie udevd-work[1072]: '/sbin/modprobe -b pci:v00008086d00000046sv00000000sd00000000bc03sc00i00' unexpected exit with status 0x0009
Jan 19 22:52:26 harlie kernel: c1074061 000000d0 f2f42b80 00000000 000a13d2 f2d5dcc0 00000001 f2303cac
Jan 19 22:52:26 harlie kernel: c107416f 00000000 000a13d2 00000000 f2303cd4 f8d620ed f2cee620 00001000
Jan 19 22:52:26 harlie kernel: 00000000 000a13d2 f1456118 f2d5dcc0 f1a40000 00001000 f2303d04 f8d637ab
Jan 19 22:52:26 harlie kernel: Call Trace:
Jan 19 22:52:26 harlie kernel: [<c1074061>] ? do_read_cache_page+0x71/0x160
Jan 19 22:52:26 harlie kernel: [<c107416f>] ? read_cache_page_gfp+0x1f/0x30
Jan 19 22:52:26 harlie kernel: [<f8d620ed>] ? i915_gem_object_get_pages+0xad/0x1d0 [i915]
Jan 19 22:52:26 harlie kernel: [<f8d637ab>] ? i915_gem_object_bind_to_gtt+0xeb/0x2d0 [i915]
Jan 19 22:52:26 harlie kernel: [<f8d65961>] ? i915_gem_object_pin+0x151/0x190 [i915]
Jan 19 22:52:26 harlie kernel: [<c11e16ed>] ? drm_gem_object_init+0x3d/0x60
Jan 19 22:52:26 harlie kernel: [<f8d65aa5>] ? i915_gem_init_ringbuffer+0x105/0x1e0 [i915]
Jan 19 22:52:26 harlie kernel: [<f8d571b7>] ? i915_driver_load+0x667/0x1160 [i915]
Reported-by: John J. Stimson-III <john@idsfa.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6e5e4477d63af2a5ffd9a8020a7aa9289f1f4b34
Author: Knut Petersen <knut_petersen@t-online.de>
Date: Fri Jan 14 15:38:10 2011 +0000
drm/i915/lvds: Add AOpen i915GMm-HFS to the list of false-positive LVDS
commit 22ab70d3262ddb6e69b3c246a34e2967ba5eb1e8 upstream.
Signed-off-by: Knut Petersen <knut_petersen@t-online.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2a4232e1c1c1a821bf012fc6fe3211fbed0e0f05
Author: Alex Deucher <alexdeucher@gmail.com>
Date: Wed Feb 2 19:46:06 2011 -0500
drm/radeon/kms: fix s/r issues with bios scratch regs
commit 87364760de5d631390c478fcbac8db1b926e0adf upstream.
The accelerate mode bit gets checked by certain atom
command tables to set up some register state. It needs
to be clear when setting modes and set when not.
Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=26942
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2dc65dfd4e358e2057880dcaabc5416a96b5cd5f
Author: Alex Deucher <alexdeucher@gmail.com>
Date: Tue Feb 1 19:06:46 2011 -0500
drm/radeon: remove 0x4243 pci id
commit 63a507800c8aca5a1891d598ae13f829346e8e39 upstream.
0x4243 is a PCI bridge, not a GPU.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=33815
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 012756942c46e1f645af4eeace2d911ce0b5fa6e
Author: Alex Deucher <alexdeucher@gmail.com>
Date: Mon Jan 31 16:48:51 2011 -0500
drm/radeon/kms: add pll debugging output
commit 51d4bf840a27fe02c883ddc6d9708af056773769 upstream.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit df00c3d5194963ac1bcd7a234d98681a46e1148a
Author: Jerome Glisse <jglisse@redhat.com>
Date: Wed Jan 26 17:51:03 2011 -0500
radeon/kms: fix dp displayport mode validation
commit 6bba2e116808ca12e30c8d88dfedabf8b8d67390 upstream.
Check if there is a big enough dp clock & enough dp lane to
drive the video mode provided.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-By: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 30877fc89aec3196b6572915144ec6c2882b0608
Author: Alex Deucher <alexdeucher@gmail.com>
Date: Tue Jan 18 18:26:11 2011 +0000
drm/radeon/kms: make the mac rv630 quirk generic
commit be23da8ad219650517cbbb7acbeaeb235667113a upstream.
Seems some other boards do this as well.
Reported-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 61eab5d5b5782aed3c21e52f7a98d96def224e37
Author: Alex Deucher <alexdeucher@gmail.com>
Date: Tue Jan 4 00:43:39 2011 -0500
drm/radeon/kms: add quirk for Mac Radeon HD 2600 card
commit f598aa7593427ffe3a61e7767c34bd695a5e7ed0 upstream.
Reported-by: å±‹å›½é¥ <hyagni@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fdeb2363045f81ba7ce97dc22abe05e02b0d1b52
Author: Mike Snitzer <snitzer@redhat.com>
Date: Thu Jan 13 19:59:46 2011 +0000
dm mpath: disable blk_abort_queue
commit 09c9d4c9b6a2b5909ae3c6265e4cd3820b636863 upstream.
Revert commit 224cb3e981f1b2f9f93dbd49eaef505d17d894c2
dm: Call blk_abort_queue on failed paths
Multipath began to use blk_abort_queue() to allow for
lower latency path deactivation. This was found to
cause list corruption:
the cmd gets blk_abort_queued/timedout run on it and the scsi eh
somehow is able to complete and run scsi_queue_insert while
scsi_request_fn is still trying to process the request.
https://www.redhat.com/archives/dm-devel/2010-November/msg00085.html
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Mike Anderson <andmike@linux.vnet.ibm.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8e71d6122e26d85672d9e7ef5e001dec289190b4
Author: Mike Snitzer <snitzer@redhat.com>
Date: Thu Jan 13 19:53:46 2011 +0000
dm: dont take i_mutex to change device size
commit c217649bf2d60ac119afd71d938278cffd55962b upstream.
No longer needlessly hold md->bdev->bd_inode->i_mutex when changing the
size of a DM device. This additional locking is unnecessary because
i_size_write() is already protected by the existing critical section in
dm_swap_table(). DM already has a reference on md->bdev so the
associated bd_inode may be changed without lifetime concerns.
A negative side-effect of having held md->bdev->bd_inode->i_mutex was
that a concurrent DM device resize and flush (via fsync) would deadlock.
Dropping md->bdev->bd_inode->i_mutex eliminates this potential for
deadlock. The following reproducer no longer deadlocks:
https://www.redhat.com/archives/dm-devel/2009-July/msg00284.html
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bc0a20a9e8d35e81dd4b6bd65f03db30074f0581
Author: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue Jan 11 16:14:24 2011 -0800
ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro
commit 8d661f1e462d50bd83de87ee628aaf820ce3c66c upstream.
It is defined in include/linux/ieee80211.h. As per IEEE spec.
bit6 to bit15 in block ack parameter represents buffer size.
So the bitmask should be 0xFFC0.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8a79989a2ae13b66764aea35156dd7a7e572c356
Author: Matthew Garrett <mjg@redhat.com>
Date: Thu Oct 21 17:42:40 2010 -0400
tpm: Autodetect itpm devices
commit 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 upstream.
Some Lenovos have TPMs that require a quirk to function correctly. This can
be autodetected by checking whether the device has a _HID of INTC0102. This
is an invalid PNPid, and as such is discarded by the pnp layer - however
it's still present in the ACPI code, so we can pull it out that way. This
means that the quirk won't be automatically applied on non-ACPI systems,
but without ACPI we don't have any way to identify the chip anyway so I
don't think that's a great concern.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 22bd8535f36e895c87dc5d14b8dda917b3dc9cf2
Author: Eric Paris <eparis@redhat.com>
Date: Thu Dec 2 16:13:40 2010 -0500
SELinux: do not compute transition labels on mountpoint labeled filesystems
commit 415103f9932d45f7927f4b17e3a9a13834cdb9a1 upstream.
selinux_inode_init_security computes transitions sids even for filesystems
that use mount point labeling. It shouldn't do that. It should just use
the mount point label always and no matter what.
This causes 2 problems. 1) it makes file creation slower than it needs to be
since we calculate the transition sid and 2) it allows files to be created
with a different label than the mount point!
# id -Z
staff_u:sysadm_r:sysadm_t:s0-s0:c0.c1023
# sesearch --type --class file --source sysadm_t --target tmp_t
Found 1 semantic te rules:
type_transition sysadm_t tmp_t : file user_tmp_t;
# mount -o loop,context="system_u:object_r:tmp_t:s0" /tmp/fs /mnt/tmp
# ls -lZ /mnt/tmp
drwx------. root root system_u:object_r:tmp_t:s0 lost+found
# touch /mnt/tmp/file1
# ls -lZ /mnt/tmp
-rw-r--r--. root root staff_u:object_r:user_tmp_t:s0 file1
drwx------. root root system_u:object_r:tmp_t:s0 lost+found
Whoops, we have a mount point labeled filesystem tmp_t with a user_tmp_t
labeled file!
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 17bb9661ff7564562d0dedd558f255408d274121
Author: Eric Paris <eparis@redhat.com>
Date: Thu Dec 16 11:46:51 2010 -0500
SELinux: define permissions for DCB netlink messages
commit 350e4f31e0eaf56dfc3b328d24a11bdf42a41fb8 upstream.
Commit 2f90b865 added two new netlink message types to the netlink route
socket. SELinux has hooks to define if netlink messages are allowed to
be sent or received, but it did not know about these two new message
types. By default we allow such actions so noone likely noticed. This
patch adds the proper definitions and thus proper permissions
enforcement.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 249afc04243913d4b3fab154079197102fbb4c8e
Author: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Date: Fri Nov 12 22:30:02 2010 +0100
TPM: Long default timeout fix
commit c4ff4b829ef9e6353c0b133b7adb564a68054979 upstream.
If duration variable value is 0 at this point, it's because
chip->vendor.duration wasn't filled by tpm_get_timeouts() yet.
This patch sets then the lowest timeout just to give enough
time for tpm_get_timeouts() to further succeed.
This fix avoids long boot times in case another entity attempts
to send commands to the TPM when the TPM isn't accessible.
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b2feccf658128a26c8c149a570099dac7684f661
Author: Tejun Heo <tj@kernel.org>
Date: Sun Jan 9 17:48:20 2011 -0500
pata_mpc52xx: inherit from ata_bmdma_port_ops
commit 77c5fd19075d299fe820bb59bb21b0b113676e20 upstream.
pata_mpc52xx supports BMDMA but inherits ata_sff_port_ops which
triggers BUG_ON() when a DMA command is issued. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Roman Fietze <roman.fietze@telemotive.de>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ce4aad68fad96b4de17241106404b725b6476d86
Author: NeilBrown <neilb@suse.de>
Date: Wed Jan 12 09:03:35 2011 +1100
md: fix regression with re-adding devices to arrays with no metadata
commit bf572541ab44240163eaa2d486b06f306a31d45a upstream.
Commit 1a855a0606 (2.6.37-rc4) fixed a problem where devices were
re-added when they shouldn't be but caused a regression in a less
common case that means sometimes devices cannot be re-added when they
should be.
In particular, when re-adding a device to an array without metadata
we should always access the device, but after the above commit we
didn't.
This patch sets the In_sync flag in that case so that the re-add
succeeds.
This patch is suitable for any -stable kernel to which 1a855a0606 was
applied.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit dd27f28ba28e59f20025ad5fdbcf95648ab8af63
Author: Anton Blanchard <anton@samba.org>
Date: Thu Jan 20 14:44:33 2011 -0800
kernel/smp.c: fix smp_call_function_many() SMP race
commit 6dc19899958e420a931274b94019e267e2396d3e upstream.
I noticed a failure where we hit the following WARN_ON in
generic_smp_call_function_interrupt:
if (!cpumask_test_and_clear_cpu(cpu, data->cpumask))
continue;
data->csd.func(data->csd.info);
refs = atomic_dec_return(&data->refs);
WARN_ON(refs < 0); <-------------------------
We atomically tested and cleared our bit in the cpumask, and yet the
number of cpus left (ie refs) was 0. How can this be?
It turns out commit 54fdade1c3332391948ec43530c02c4794a38172
("generic-ipi: make struct call_function_data lockless") is at fault. It
removes locking from smp_call_function_many and in doing so creates a
rather complicated race.
The problem comes about because:
- The smp_call_function_many interrupt handler walks call_function.queue
without any locking.
- We reuse a percpu data structure in smp_call_function_many.
- We do not wait for any RCU grace period before starting the next
smp_call_function_many.
Imagine a scenario where CPU A does two smp_call_functions back to back,
and CPU B does an smp_call_function in between. We concentrate on how CPU
C handles the calls:
CPU A CPU B CPU C CPU D
smp_call_function
smp_call_function_interrupt
walks
call_function.queue sees
data from CPU A on list
smp_call_function
smp_call_function_interrupt
walks
call_function.queue sees
(stale) CPU A on list
smp_call_function int
clears last ref on A
list_del_rcu, unlock
smp_call_function reuses
percpu *data A
data->cpumask sees and
clears bit in cpumask
might be using old or new fn!
decrements refs below 0
set data->refs (too late!)
The important thing to note is since the interrupt handler walks a
potentially stale call_function.queue without any locking, then another
cpu can view the percpu *data structure at any time, even when the owner
is in the process of initialising it.
The following test case hits the WARN_ON 100% of the time on my PowerPC
box (having 128 threads does help :)
#include <linux/module.h>
#include <linux/init.h>
#define ITERATIONS 100
static void do_nothing_ipi(void *dummy)
{
}
static void do_ipis(struct work_struct *dummy)
{
int i;
for (i = 0; i < ITERATIONS; i++)
smp_call_function(do_nothing_ipi, NULL, 1);
printk(KERN_DEBUG "cpu %d finished\n", smp_processor_id());
}
static struct work_struct work[NR_CPUS];
static int __init testcase_init(void)
{
int cpu;
for_each_online_cpu(cpu) {
INIT_WORK(&work[cpu], do_ipis);
schedule_work_on(cpu, &work[cpu]);
}
return 0;
}
static void __exit testcase_exit(void)
{
}
module_init(testcase_init)
module_exit(testcase_exit)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Anton Blanchard");
I tried to fix it by ordering the read and the write of ->cpumask and
->refs. In doing so I missed a critical case but Paul McKenney was able
to spot my bug thankfully :) To ensure we arent viewing previous
iterations the interrupt handler needs to read ->refs then ->cpumask then
->refs _again_.
Thanks to Milton Miller and Paul McKenney for helping to debug this issue.
[miltonm@bga.com: add WARN_ON and BUG_ON, remove extra read of refs before initial read of mask that doesn't help (also noted by Peter Zijlstra), adjust comments, hopefully clarify scenario ]
[miltonm@bga.com: remove excess tests]
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d12879db6eaa45e1717bddb828b7dfeec5cfe1fd
Author: Michael Büsch <mb@bu3sch.de>
Date: Fri Feb 4 23:34:45 2011 +0100
ssb-pcmcia: Fix parsing of invariants tuples
commit dd3cb633078fb12e06ce6cebbdfbf55a7562e929 upstream.
This fixes parsing of the device invariants (MAC address)
for PCMCIA SSB devices.
ssb_pcmcia_do_get_invariants expects an iv pointer as data
argument.
Tested-by: dylan cristiani <d.cristiani@idem-tech.it>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4796e5e331675712ec5d4e26a6b904d856c99058
Author: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat Jan 15 18:19:48 2011 +0100
firewire: core: fix unstable I/O with Canon camcorder
commit 6044565af458e7fa6e748bff437ecc49dea88d79 upstream.
Regression since commit 10389536742c, "firewire: core: check for 1394a
compliant IRM, fix inaccessibility of Sony camcorder":
The camcorder Canon MV5i generates lots of bus resets when asynchronous
requests are sent to it (e.g. Config ROM read requests or FCP Command
write requests) if the camcorder is not root node. This causes drop-
outs in videos or makes the camcorder entirely inaccessible.
https://bugzilla.redhat.com/show_bug.cgi?id=633260
Fix this by allowing any Canon device, even if it is a pre-1394a IRM
like MV5i are, to remain root node (if it is at least Cycle Master
capable). With the FireWire controller cards that I tested, MV5i always
becomes root node when plugged in and left to its own devices.
Reported-by: Ralf Lange
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3bb03410e25218cc3d7634babb00f2da66dc6650
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu Jan 20 20:35:23 2011 +0000
powerpc: Fix some 6xx/7xxx CPU setup functions
commit 1f1936ff3febf38d582177ea319eaa278f32c91f upstream.
Some of those functions try to adjust the CPU features, for example
to remove NAP support on some revisions. However, they seem to use
r5 as an index into the CPU table entry, which might have been right
a long time ago but no longer is. r4 is the right register to use.
This probably caused some off behaviours on some PowerMac variants
using 750cx or 7455 processor revisions.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4c0821e7a7ebca3614995845b91a640c6919fdc5
Author: Anton Blanchard <anton@samba.org>
Date: Thu Oct 21 00:52:12 2010 +0000
powerpc: Fix hcall tracepoint recursion
commit 57cdfdf829a850a317425ed93c6a576c9ee6329c upstream.
Spinlocks on shared processor partitions use H_YIELD to notify the
hypervisor we are waiting on another virtual CPU. Unfortunately this means
the hcall tracepoints can recurse.
The patch below adds a percpu depth and checks it on both the entry and
exit hcall tracepoints.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1f9b4d210cc74010c9b6f24dc854bf1da52262f8
Author: Justin TerAvest <teravest@google.com>
Date: Wed Feb 9 14:20:03 2011 +0100
cfq-iosched: Don't wait if queue already has requests.
commit 02a8f01b5a9f396d0327977af4c232d0f94c45fd upstream.
Commit 7667aa0630407bc07dc38dcc79d29cc0a65553c1 added logic to wait for
the last queue of the group to become busy (have at least one request),
so that the group does not lose out for not being continuously
backlogged. The commit did not check for the condition that the last
queue already has some requests. As a result, if the queue already has
requests, wait_busy is set. Later on, cfq_select_queue() checks the
flag, and decides that since the queue has a request now and wait_busy
is set, the queue is expired. This results in early expiration of the
queue.
This patch fixes the problem by adding a check to see if queue already
has requests. If it does, wait_busy is not set. As a result, time slices
do not expire early.
The queues with more than one request are usually buffered writers.
Testing shows improvement in isolation between buffered writers.
Signed-off-by: Justin TerAvest <teravest@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1327258317f30e48a67b39f6a2dd0049daa1d46c
Author: David Miller <davem@davemloft.net>
Date: Sun Feb 13 16:37:07 2011 -0800
klist: Fix object alignment on 64-bit.
commit 795abaf1e4e188c4171e3cd3dbb11a9fcacaf505 upstream.
Commit c0e69a5bbc6f ("klist.c: bit 0 in pointer can't be used as flag")
intended to make sure that all klist objects were at least pointer size
aligned, but used the constant "4" which only works on 32-bit.
Use "sizeof(void *)" which is correct in all cases.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4d77999fd16484510b65799ab0ebf00c700c0c16
Author: Dario Lombardo <dario.lombardo@libero.it>
Date: Fri Jan 21 15:35:19 2011 +0100
drivers: update to pl2303 usb-serial to support Motorola cables
commit 96a3e79edff6f41b0f115a82f1a39d66218077a7 upstream.
Added 0x0307 device id to support Motorola cables to the pl2303 usb
serial driver. This cable has a modified chip that is a pl2303, but
declares itself as 0307. Fixed by adding the right device id to the
supported devices list, assigning it the code labeled
PL2303_PRODUCT_ID_MOTOROLA.
Signed-off-by: Dario Lombardo <dario.lombardo@libero.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 445772b82658a50d568a5f8082afdbe1f9df3a2d
Author: Simone Contini <s.contini@oltrelinux.com>
Date: Mon Apr 12 23:25:10 2010 +0200
USB: serial: pl2303: Hybrid reader Uniform HCR331
commit 18344a1cd5889d48dac67229fcf024ed300030d5 upstream.
I tried a magnetic stripe reader
(http://www.kimaldi.com/kimaldi_eng/productos/lectores_de_tarjetas/lectores_tarjeta_chip_y_dni/lector_hibrido_uniform_hcr_331)
and I see that it is interfaced with a PL2303. I wrote a patch to use
your driver which simply adds the product ID for the device and it
seems working fine.
From: Simone Contini <s.contini@oltrelinux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 66622d09ac2597d858ecbcf1a22c03f8a069638a
Author: Tim Deegan <Tim.Deegan@citrix.com>
Date: Thu Feb 10 08:50:41 2011 +0000
fix jiffy calculations in calibrate_delay_direct to handle overflow
commit 70a062286b9dfcbd24d2e11601aecfead5cf709a upstream.
Fixes a hang when booting as dom0 under Xen, when jiffies can be
quite large by the time the kernel init gets this far.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
[jbeulich@novell.com: !time_after() -> time_before_eq() as suggested by Jiri Slaby]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 61f5f3c07b38a55de0e6ed1f6e412790366a9068
Author: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Wed Feb 2 17:02:55 2011 -0800
x86, mtrr: Avoid MTRR reprogramming on BP during boot on UP platforms
commit f7448548a9f32db38f243ccd4271617758ddfe2c upstream.
Markus Kohn ran into a hard hang regression on an acer aspire
1310, when acpi is enabled. git bisect showed the following
commit as the bad one that introduced the boot regression.
commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3
Author: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Wed Aug 19 18:05:36 2009 -0700
x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
Because of the UP configuration of that platform,
native_smp_prepare_cpus() bailed out (in smp_sanity_check())
before doing the set_mtrr_aps_delayed_init()
Further down the boot path, native_smp_cpus_done() will call the
delayed MTRR initialization for the AP's (mtrr_aps_init()) with
mtrr_aps_delayed_init not set. This resulted in the boot
processor reprogramming its MTRR's to the values seen during the
start of the OS boot. While this is not needed ideally, this
shouldn't have caused any side-effects. This is because the
reprogramming of MTRR's (set_mtrr_state() that gets called via
set_mtrr()) will check if the live register contents are
different from what is being asked to write and will do the actual
write only if they are different.
BP's mtrr state is read during the start of the OS boot and
typically nothing would have changed when we ask to reprogram it
on BP again because of the above scenario on an UP platform. So
on a normal UP platform no reprogramming of BP MTRR MSR's
happens and all is well.
However, on this platform, bios seems to be modifying the fixed
mtrr range registers between the start of OS boot and when we
double check the live registers for reprogramming BP MTRR
registers. And as the live registers are modified, we end up
reprogramming the MTRR's to the state seen during the start of
the OS boot.
During ACPI initialization, something in the bios (probably smi
handler?) don't like this fact and results in a hard lockup.
We didn't see this boot hang issue on this platform before the
commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3, because only
the AP's (if any) will program its MTRR's to the value that BP
had at the start of the OS boot.
Fix this issue by checking mtrr_aps_delayed_init before
continuing further in the mtrr_aps_init(). Now, only AP's (if
any) will program its MTRR's to the BP values during boot.
Addresses https://bugzilla.novell.com/show_bug.cgi?id=623393
[ By the way, this behavior of the bios modifying MTRR's after the start
of the OS boot is not common and the kernel is not prepared to
handle this situation well. Irrespective of this issue, during
suspend/resume, linux kernel will try to reprogram the BP's MTRR values
to the values seen during the start of the OS boot. So suspend/resume might
be already broken on this platform for all linux kernel versions. ]
Reported-and-bisected-by: Markus Kohn <jabber@gmx.org>
Tested-by: Markus Kohn <jabber@gmx.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Thomas Renninger <trenn@novell.com>
Cc: Rafael Wysocki <rjw@novell.com>
Cc: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <1296694975.4418.402.camel@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a0c3347293050b7d76aef3fbfc69466946c0da52
Author: Eric W. Biederman <ebiederm@xmission.com>
Date: Sat Jan 29 14:57:22 2011 +0000
net: Fix ip link add netns oops
commit 13ad17745c2cbd437d9e24b2d97393e0be11c439 upstream.
Ed Swierk <eswierk@bigswitch.com> writes:
> On 2.6.35.7
> ip link add link eth0 netns 9999 type macvlan
> where 9999 is a nonexistent PID triggers an oops and causes all network functions to hang:
> [10663.821898] BUG: unable to handle kernel NULL pointer dereference at 000000000000006d
> [10663.821917] IP: [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170
> [10663.821933] PGD 1d3927067 PUD 22f5c5067 PMD 0
> [10663.821944] Oops: 0000 [#1] SMP
> [10663.821953] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
> [10663.821959] CPU 3
> [10663.821963] Modules linked in: macvlan ip6table_filter ip6_tables rfcomm ipt_MASQUERADE binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack sco ipt_REJECT bnep l2cap xt_tcpudp iptable_filter ip_tables x_tables bridge stp vboxnetadp vboxnetflt vboxdrv kvm_intel kvm parport_pc ppdev snd_hda_codec_intelhdmi snd_hda_codec_conexant arc4 iwlagn iwlcore mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi i915 snd_seq_midi_event snd_seq thinkpad_acpi drm_kms_helper btusb tpm_tis nvram uvcvideo snd_timer snd_seq_device bluetooth videodev v4l1_compat v4l2_compat_ioctl32 tpm drm tpm_bios snd cfg80211 psmouse serio_raw intel_ips soundcore snd_page_alloc intel_agp i2c_algo_bit video output netconsole configfs lp parport usbhid hid e1000e sdhci_pci ahci libahci sdhci led_class
> [10663.822155]
> [10663.822161] Pid: 6000, comm: ip Not tainted 2.6.35-23-generic #41-Ubuntu 2901CTO/2901CTO
> [10663.822167] RIP: 0010:[<ffffffff8149c2fa>] [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170
> [10663.822177] RSP: 0018:ffff88014aebf7b8 EFLAGS: 00010286
> [10663.822182] RAX: 00000000fffffff4 RBX: ffff8801ad900800 RCX: 0000000000000000
> [10663.822187] RDX: ffff880000000000 RSI: 0000000000000000 RDI: ffff88014ad63000
> [10663.822191] RBP: ffff88014aebf808 R08: 0000000000000041 R09: 0000000000000041
> [10663.822196] R10: 0000000000000000 R11: dead000000200200 R12: ffff88014aebf818
> [10663.822201] R13: fffffffffffffffd R14: ffff88014aebf918 R15: ffff88014ad62000
> [10663.822207] FS: 00007f00c487f700(0000) GS:ffff880001f80000(0000) knlGS:0000000000000000
> [10663.822212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [10663.822216] CR2: 000000000000006d CR3: 0000000231f19000 CR4: 00000000000026e0
> [10663.822221] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [10663.822226] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [10663.822231] Process ip (pid: 6000, threadinfo ffff88014aebe000, task ffff88014afb16e0)
> [10663.822236] Stack:
> [10663.822240] ffff88014aebf808 ffffffff814a2bb5 ffff88014aebf7e8 00000000a00ee8d6
> [10663.822251] <0> 0000000000000000 ffffffffa00ef940 ffff8801ad900800 ffff88014aebf818
> [10663.822265] <0> ffff88014aebf918 ffff8801ad900800 ffff88014aebf858 ffffffff8149c413
> [10663.822281] Call Trace:
> [10663.822290] [<ffffffff814a2bb5>] ? dev_addr_init+0x75/0xb0
> [10663.822298] [<ffffffff8149c413>] dev_alloc_name+0x43/0x90
> [10663.822307] [<ffffffff814a85ee>] rtnl_create_link+0xbe/0x1b0
> [10663.822314] [<ffffffff814ab2aa>] rtnl_newlink+0x48a/0x570
> [10663.822321] [<ffffffff814aafcc>] ? rtnl_newlink+0x1ac/0x570
> [10663.822332] [<ffffffff81030064>] ? native_x2apic_icr_read+0x4/0x20
> [10663.822339] [<ffffffff814a8c17>] rtnetlink_rcv_msg+0x177/0x290
> [10663.822346] [<ffffffff814a8aa0>] ? rtnetlink_rcv_msg+0x0/0x290
> [10663.822354] [<ffffffff814c25d9>] netlink_rcv_skb+0xa9/0xd0
> [10663.822360] [<ffffffff814a8a85>] rtnetlink_rcv+0x25/0x40
> [10663.822367] [<ffffffff814c223e>] netlink_unicast+0x2de/0x2f0
> [10663.822374] [<ffffffff814c303e>] netlink_sendmsg+0x1fe/0x2e0
> [10663.822383] [<ffffffff81488533>] sock_sendmsg+0xf3/0x120
> [10663.822391] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20
> [10663.822400] [<ffffffff81168656>] ? __d_lookup+0x136/0x150
> [10663.822406] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20
> [10663.822414] [<ffffffff812b7a0d>] ? _atomic_dec_and_lock+0x4d/0x80
> [10663.822422] [<ffffffff8116ea90>] ? mntput_no_expire+0x30/0x110
> [10663.822429] [<ffffffff81486ff5>] ? move_addr_to_kernel+0x65/0x70
> [10663.822435] [<ffffffff81493308>] ? verify_iovec+0x88/0xe0
> [10663.822442] [<ffffffff81489020>] sys_sendmsg+0x240/0x3a0
> [10663.822450] [<ffffffff8111e2a9>] ? __do_fault+0x479/0x560
> [10663.822457] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20
> [10663.822465] [<ffffffff8116cf4a>] ? alloc_fd+0x10a/0x150
> [10663.822473] [<ffffffff8158d76e>] ? do_page_fault+0x15e/0x350
> [10663.822482] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
> [10663.822487] Code: 90 48 8d 78 02 be 25 00 00 00 e8 92 1d e2 ff 48 85 c0 75 cf bf 20 00 00 00 e8 c3 b1 c6 ff 49 89 c7 b8 f4 ff ff ff 4d 85 ff 74 bd <4d> 8b 75 70 49 8d 45 70 48 89 45 b8 49 83 ee 58 eb 28 48 8d 55
> [10663.822618] RIP [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170
> [10663.822627] RSP <ffff88014aebf7b8>
> [10663.822631] CR2: 000000000000006d
> [10663.822636] ---[ end trace 3dfd6c3ad5327ca7 ]---
This bug was introduced in:
commit 81adee47dfb608df3ad0b91d230fb3cef75f0060
Author: Eric W. Biederman <ebiederm@aristanetworks.com>
Date: Sun Nov 8 00:53:51 2009 -0800
net: Support specifying the network namespace upon device creation.
There is no good reason to not support userspace specifying the
network namespace during device creation, and it makes it easier
to create a network device and pass it to a child network namespace
with a well known name.
We have to be careful to ensure that the target network namespace
for the new device exists through the life of the call. To keep
that logic clear I have factored out the network namespace grabbing
logic into rtnl_link_get_net.
In addtion we need to continue to pass the source network namespace
to the rtnl_link_ops.newlink method so that we can find the base
device source network namespace.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Where apparently I forgot to add error handling to the path where we create
a new network device in a new network namespace, and pass in an invalid pid.
Reported-by: Ed Swierk <eswierk@bigswitch.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit edf07481f5a833b01bf23910834133fdac72fde1
Author: Tejun Heo <tj@kernel.org>
Date: Thu Feb 10 15:01:22 2011 -0800
ptrace: use safer wake up on ptrace_detach()
commit 01e05e9a90b8f4c3997ae0537e87720eb475e532 upstream.
The wake_up_process() call in ptrace_detach() is spurious and not
interlocked with the tracee state. IOW, the tracee could be running or
sleeping in any place in the kernel by the time wake_up_process() is
called. This can lead to the tracee waking up unexpectedly which can be
dangerous.
The wake_up is spurious and should be removed but for now reduce its
toxicity by only waking up if the tracee is in TRACED or STOPPED state.
This bug can possibly be used as an attack vector. I don't think it
will take too much effort to come up with an attack which triggers oops
somewhere. Most sleeps are wrapped in condition test loops and should
be safe but we have quite a number of places where sleep and wakeup
conditions are expected to be interlocked. Although the window of
opportunity is tiny, ptrace can be used by non-privileged users and with
some loading the window can definitely be extended and exploited.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0769e495f2a53ac6e1e52b1a5954a1f90b52c3d2
Author: Pavel Machek <pavel@ucw.cz>
Date: Sun Jan 9 08:38:48 2011 +0100
serial: unbreak billionton CF card
commit d0694e2aeb815042aa0f3e5036728b3db4446f1d upstream.
Unbreak Billionton CF bluetooth card. This actually fixes a regression
on zaurus.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d8f2ab6a443454b9e0e0728418339f75b9ecd809
Author: Jean Delvare <khali@linux-fr.org>
Date: Fri Jan 14 22:03:49 2011 +0100
i2c: Unregister dummy devices last on adapter removal
commit 5219bf884b6e2b54e734ca1799b6f0014bb2b4b7 upstream.
Remove real devices first and dummy devices last. This gives device
driver which instantiated dummy devices themselves a chance to clean
them up before we do.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e2e38d481ef60ccc6724f996bb8c131daa156c28
Author: Christian Lamparter <chunkeey@googlemail.com>
Date: Thu Jan 6 23:47:52 2011 +0100
p54: fix sequence no. accounting off-by-one error
commit 3b5c5827d1f80ad8ae844a8b1183f59ddb90fe25 upstream.
P54_HDR_FLAG_DATA_OUT_SEQNR is meant to tell the
firmware that "the frame's sequence number has
already been set by the application."
Whereas IEEE80211_TX_CTL_ASSIGN_SEQ is set for
frames which lack a valid sequence number and
either the driver or firmware has to assign one.
Yup, it's the exact opposite!
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 10b75926fef4637862aeb35bb0d2dd3e518ff2b9
Author: Sven Neumann <s.neumann@raumfeld.com>
Date: Fri Nov 12 11:36:22 2010 +0100
ds2760_battery: Fix calculation of time_to_empty_now
commit 86af95039b69a90db15294eb1f9c147f1df0a8ea upstream.
A check against division by zero was modified in commit b0525b48.
Since this change time_to_empty_now is always reported as zero
while the battery is discharging and as a negative value while
the battery is charging. This is because current is negative while
the battery is discharging.
Fix the check introduced by commit b0525b48 so that time_to_empty_now
is reported correctly during discharge and as zero while charging.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ec00083b5319728c4223e62dd603f4aac2985843
Author: Milton Miller <miltonm@bga.com>
Date: Fri Jan 7 02:55:06 2011 -0600
virtio: remove virtio-pci root device
commit 8b3bb3ecf1934ac4a7005ad9017de1127e2fbd2f upstream.
We sometimes need to map between the virtio device and
the given pci device. One such use is OS installer that
gets the boot pci device from BIOS and needs to
find the relevant block device. Since it can't,
installation fails.
Instead of creating a top-level devices/virtio-pci
directory, create each device under the corresponding
pci device node. Symlinks to all virtio-pci
devices can be found under the pci driver link in
bus/pci/drivers/virtio-pci/devices, and all virtio
devices under drivers/bus/virtio/devices.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Tested-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b1c47a314a92d625d7a438d5d886115a6831ac9f
Author: Tejun Heo <tj@kernel.org>
Date: Wed Dec 22 10:06:36 2010 +0100
PCI: pci-stub: ignore zero-length id parameters
commit 99a0fadf561e1f553c08f0a29f8b2578f55dd5f0 upstream.
pci-stub uses strsep() to separate list of ids and generates a warning
message when it fails to parse an id. However, not specifying the
parameter results in ids set to an empty string. strsep() happily
returns the empty string as the first token and thus triggers the
warning message spuriously.
Make the tokner ignore zero length ids.
Reported-by: Chris Wright <chrisw@sous-sol.org>
Reported-by: Prasad Joshi <P.G.Joshi@student.reading.ac.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8512adb61ffe72f5875421f548a6a964336115f0
Author: Thomas Taranowski <tom@baringforge.com>
Date: Wed Jan 12 17:00:44 2011 -0800
rapidio: fix hang on RapidIO doorbell queue full condition
commit 12a4dc43911785f51a596f771ae0701b18d436f1 upstream.
In fsl_rio_dbell_handler() the code currently simply acknowledges the QFI
queue full interrupt, but does nothing to resolve the queue full
condition. Instead, it jumps to the end of the isr. When a queue full
condition occurs, the isr is then re-entered immediately and continually,
forever.
The fix is to just fall through and read out current doorbell entries.
Signed-off-by: Thomas Taranowski <tom@baringforge.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5daa2a8aec9f4f2ad3cdb8a0ba9a61597aa5f898
Author: Paul Fox <pgf@laptop.org>
Date: Wed Jan 12 17:00:07 2011 -0800
rtc-cmos: fix suspend/resume
commit 2fb08e6ca9f00d1aedb3964983e9c8f84b36b807 upstream.
rtc-cmos was setting suspend/resume hooks at the device_driver level.
However, the platform bus code (drivers/base/platform.c) only looks for
resume hooks at the dev_pm_ops level, or within the platform_driver.
Switch rtc_cmos to use dev_pm_ops so that suspend/resume code is executed
again.
Paul said:
: The user visible symptom in our (XO laptop) case was that rtcwake would
: fail to wake the laptop. The RTC alarm would expire, but the wakeup
: wasn't unmasked.
:
: As for severity, the impact may have been reduced because if I recall
: correctly, the bug only affected platforms with CONFIG_PNP disabled.
Signed-off-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ee6322c509bdf8566c2d90d02b38fa7be5cdf3d0
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Fri Jan 21 15:54:57 2011 +0000
NFS: Fix "kernel BUG at fs/aio.c:554!"
commit 839f7ad6932d95f4d5ae7267b95c574714ff3d5b upstream.
Nick Piggin reports:
> I'm getting use after frees in aio code in NFS
>
> [ 2703.396766] Call Trace:
> [ 2703.396858] [<ffffffff8100b057>] ? native_sched_clock+0x27/0x80
> [ 2703.396959] [<ffffffff8108509e>] ? put_lock_stats+0xe/0x40
> [ 2703.397058] [<ffffffff81088348>] ? lock_release_holdtime+0xa8/0x140
> [ 2703.397159] [<ffffffff8108a2a5>] lock_acquire+0x95/0x1b0
> [ 2703.397260] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60
> [ 2703.397361] [<ffffffff81039701>] ? get_parent_ip+0x11/0x50
> [ 2703.397464] [<ffffffff81612a31>] _raw_spin_lock_irq+0x41/0x80
> [ 2703.397564] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60
> [ 2703.397662] [<ffffffff811627db>] aio_put_req+0x2b/0x60
> [ 2703.397761] [<ffffffff811647fe>] do_io_submit+0x2be/0x7c0
> [ 2703.397895] [<ffffffff81164d0b>] sys_io_submit+0xb/0x10
> [ 2703.397995] [<ffffffff8100307b>] system_call_fastpath+0x16/0x1b
>
> Adding some tracing, it is due to nfs completing the request then
> returning something other than -EIOCBQUEUED, so aio.c
> also completes the request.
To address this, prevent the NFS direct I/O engine from completing
async iocbs when the forward path returns an error without starting
any I/O.
This fix appears to survive ^C during both "xfstest no. 208" and "fsx
-Z."
It's likely this bug has existed for a very long while, as we are seeing
very similar symptoms in OEL 5. Copying stable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c9592f07f243b5605ddbe5b9d7a7cfe5652de919
Author: Mike Frysinger <vapier@gentoo.org>
Date: Tue Jan 11 19:57:33 2011 -0500
ASoC: Blackfin AC97: fix build error after multi-component update
commit e9c2048915048d605fd76539ddd96f00d593e1eb upstream.
We need to tweak how we query the active capture/playback state after
the recent overhauls of common code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 92b9c597d6c869648a04db3f32faaf22aeba8c8b
Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Date: Fri Jan 14 15:59:13 2011 +0000
ASoC: WM8990: msleep() takes milliseconds not jiffies
commit 7ebcf5d6021a696680ee77d9162a2edec2d671dd upstream.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 841d1e0a6aad6f65dae941af38c0f2566e4fa781
Author: Clemens Ladisch <clemens@ladisch.de>
Date: Thu Feb 10 16:15:44 2011 +0100
ALSA: hrtimer: handle delayed timer interrupts
commit b1d4f7f4bdcf9915c41ff8cfc4425c84dabb1fde upstream.
If a timer interrupt was delayed too much, hrtimer_forward_now() will
forward the timer expiry more than once. When this happens, the
additional number of elapsed ALSA timer ticks must be passed to
snd_timer_interrupt() to prevent the ALSA timer from falling behind.
This mostly fixes MIDI slowdown problems on highly-loaded systems with
badly behaved interrupt handlers.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8352da691f11ec260191ab58d49da20bd4782b94
Author: Edgar (gimli) Hucek <gimli@dark-green.com>
Date: Tue Nov 9 17:38:42 2010 +0100
input: bcm5974: Add support for MacBookAir3
commit 6021afcf19d8c6f5db6d11cadcfb6a22d0c28a48 upstream.
This patch adds support for the MacBookAir3,1 and MacBookAir3,2
models.
[rydberg@euromail.se: touchpad range calibration]
Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9b40136e548a2954f90628e503d1bc9f146cf752
Author: Takashi Iwai <tiwai@suse.de>
Date: Wed Feb 2 17:16:38 2011 +0100
ALSA: hda - Fix memory leaks in conexant jack arrays
commit 70f7db11c45a313b23922cacf248c613c3b2144c upstream.
The Conexant codec driver adds the jack arrays in init callback which
may be called also in each PM resume. This results in the addition of
new jack element at each time.
The fix is to check whether the requested jack is already present in
the array.
Reference: Novell bug 668929
https://bugzilla.novell.com/show_bug.cgi?id=668929
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a791782f6f2e9759e26c1ccb10c661942b2da314
Author: David Henningsson <david.henningsson@canonical.com>
Date: Tue Jan 25 19:44:26 2011 +0100
ALSA: HDA: Fix dmesg output of HDMI supported bits
commit d757534ed15387202e322854cd72dc58bbb975de upstream.
This typo caused the dmesg output of the supported bits of HDMI
to be cut off early.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c59b7f8316082c2c44fde4de7007ebca5d2169b7
Author: Raymond Yau <superquad.vortex2@gmail.com>
Date: Sun Jan 16 10:55:54 2011 +0800
ALSA : au88x0 - Limit number of channels to fix Oops via OSS emu
commit d9ab344336f74c012f6643ed3d1ad8ca0136de3b upstream.
Fix playback/capture channels patch to change supported playback
channels of au8830 to 1,2,4 and capture channels to 1,2.
This prevent oops when oss emulation use SNDCTL_DSP_CHANNELS to
set 3 Channels
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1f5b107fd55a5dcc94b1a2161221cba3e53fc4ba
Author: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon Oct 25 17:51:15 2010 -0300
em28xx: Fix audio input for Terratec Grabby
commit a3fa904ec79b94f0db7faed010ff94d42f7d1d47 upstream.
The audio input line was wrong. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1c2f5926f21af23d73f92ee391d2adda2b6d7459
Author: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu Jan 6 08:16:04 2011 -0200
radio-aimslab.c: Fix gcc 4.5+ bug
commit e3c92215198cb6aa00ad38db2780faa6b72e0a3f upstream.
gcc 4.5+ doesn't properly evaluate some inlined expressions.
A previous patch were proposed by Andrew Morton using noinline.
However, the entire inlined function is bogus, so let's just
remove it and be happy.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3a08cff3675f1402d25127a4adce931d28f360b8
Author: Kashyap, Desai <kashyap.desai@lsi.com>
Date: Tue Nov 17 13:16:37 2009 +0530
mpt2sas: add missing initialization of scsih_cmds
commit d685c262083dcd5fd98b7499b22a377a3225229c upstream.
Internal command scsih_cmds init is included in mpt2sas_base_attach.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8e742a685c57cc5fea5d1d98bf4f4dbf953ea4ee
Author: Kashyap, Desai <kashyap.desai@lsi.com>
Date: Tue Jan 4 11:38:39 2011 +0530
mpt2sas: Kernel Panic during Large Topology discovery
commit 4224489f45b503f0a1f1cf310f76dc108f45689a upstream.
There was a configuration page timing out during the initial port
enable at driver load time. The port enable would fail, and this would
result in the driver unloading itself, meanwhile the driver was accessing
freed memory in another context resulting in the panic. The fix is to
prevent access to freed memory once the driver had issued the diag reset
which woke up the sleeping port enable process. The routine
_base_reset_handler was reorganized so the last sleeping process woken up was
the port_enable.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8e704f267ee2980bb51a71bf8d644507b9f7c874
Author: Kashyap, Desai <kashyap.desai@lsi.com>
Date: Tue Jan 4 11:34:57 2011 +0530
mpt2sas: Correct resizing calculation for max_queue_depth
commit 11e1b961ab067ee3acaf723531da4d3f23e1d6f7 upstream.
The ioc->hba_queue_depth is not properly resized when the controller
firmware reports that it supports more outstanding IO than what can be fit
inside the reply descriptor pool depth. This is reproduced by setting the
controller global credits larger than 30,000. The bug results in an
incorrect sizing of the queues. The fix is to resize the queue_size by
dividing queue_diff by two.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 783d92c878039172d281fd03fdd0ceee665a1a3d
Author: Kashyap, Desai <kashyap.desai@lsi.com>
Date: Tue Jan 4 11:32:13 2011 +0530
mpt2sas: Fix device removal handshake for zoned devices
commit 4dc2757a2e9a9d1f2faee4fc6119276fc0061c16 upstream.
When zoning end devices, the driver is not sending device
removal handshake alogrithm to firmware. This results in controller
firmware not sending sas topology add events the next time the device is
added. The fix is the driver should be doing the device removal handshake
even though the PHYSTATUS_VACANT bit is set in the PhyStatus of the
event data. The current design is avoiding the handshake when the
VACANT bit is set in the phy status.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b7c594f128716d94767c9c165c5aee38639e7b6f
Author: Kashyap, Desai <kashyap.desai@lsi.com>
Date: Tue Jan 4 11:40:23 2011 +0530
mpt2sas: fix Integrated Raid unsynced on shutdown problem
commit 3a9c913a3e57b170887d39456e04c18f2305ec67 upstream.
Issue:
IR shutdown(sending) and IR shutdown(complete) messages not
listed in /var/log/messages when driver is removed.
The driver needs to issue a MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED
request when the driver is unloaded so the IR metadata journal is updated.
If this request is not sent, then the volume would need a "check
consistency" issued on the next bootup if the volume was roamed from one
initiator to another. The current driver supports this feature only when the
system is rebooted, however this also need to be supported if the driver is
unloaded
Fix:
To fix this issue, the driver is going
to need to call the _scsih_ir_shutdown prior to reporting
the volumes missing from the OS, hence the device handles
are still present.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ac516aa27fabd38893f21eeb894dea16bee23a8c
Author: James Bottomley <James.Bottomley@suse.de>
Date: Thu Jan 20 17:26:44 2011 -0600
libsas: fix runaway error handler problem
commit 9ee91f7fb550a4c82f82d9818e42493484c754af upstream.
libsas makes use of scsi_schedule_eh() but forgets to clear the
host_eh_scheduled flag in its error handling routine. Because of this,
the error handler thread never gets to sleep; it's constantly awake and
trying to run the error routine leading to console spew and inability to
run anything else (at least on a UP system). The fix is to clear the
flag as we splice the work queue.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0a8513c92536d8272c6fbaa8c42e2740aaeb4942
Author: James Bottomley <James.Bottomley@suse.de>
Date: Fri Dec 17 15:36:34 2010 -0500
fix medium error problems with some arrays which can cause data corruption
commit a8733c7baf457b071528e385a0b7d4aaec79287c upstream.
Our current handling of medium error assumes that data is returned up
to the bad sector. This assumption holds good for all disk devices,
all DIF arrays and most ordinary arrays. However, an LSI array engine
was recently discovered which reports a medium error without returning
any data. This means that when we report good data up to the medium
error, we've reported junk originally in the buffer as good. Worse,
if the read consists of requested data plus a readahead, and the error
occurs in readahead, we'll just strip off the readahead and report
junk up to userspace as good data with no error.
The fix for this is to have the error position computation take into
account the amount of data returned by the driver using the scsi
residual data. Unfortunately, not every driver fills in this data,
but for those who don't, it's set to zero, which means we'll think a
full set of data was transferred and the behaviour will be identical
to the prior behaviour of the code (believe the buffer up to the error
sector). All modern drivers seem to set the residual, so that should
fix up the LSI failure/corruption case.
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 68ba505969284c6dacaea7e36c5bee4528847189
Author: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Wed Jan 5 12:47:52 2011 +0100
qdio: use proper QEBSM operand for SIGA-R and SIGA-S
commit 958c0ba403cb6a693b54be2389f9ef53377fa259 upstream.
If QIOASSIST is enabled for a qdio device the SIGA instruction requires
a modified function code. This function code modifier was missing for
SIGA-R and SIGA-S which can lead to a kernel panic caused by an
operand exception.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f5aca15a9c1bb8b4ca7d9ff657759ff121358b33
Author: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri Feb 26 22:37:54 2010 +0100
correct vdso version string
commit 13c6680acb3df25722858566b42759215ea5d2e0 upstream.
The glibc vdso code for s390 uses the version string 2.6.29, the
kernel uses the version string 2.6.26. No wonder the vdso code
is never used. The first kernel version to contain the vdso code
is 2.6.29 which makes this the correct version.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 11b97e7ca403c13bdbba0ca1dda3b48e4f93c2f4
Author: Don Fry <donald.h.fry@intel.com>
Date: Sun Feb 6 09:29:45 2011 -0800
iwlagn: Re-enable RF_KILL interrupt when down
commit 3dd823e6b86407aed1a025041d8f1df77e43a9c8 upstream.
With commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 only one RF_KILL
interrupt will be seen by the driver when the interface is down.
Re-enable the interrupt when it occurs to see all transitions.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit af01e9c0cdb7e164a6eb22c2ce8c7ed9acd8f664
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Thu Dec 23 12:38:21 2010 +0100
iwlagn: enable only rfkill interrupt when device is down
commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 upstream.
Since commit 6cd0b1cb872b3bf9fc5de4536404206ab74bafdd "iwlagn: fix
hw-rfkill while the interface is down", we enable interrupts when
device is not ready to receive them. However hardware, when it is in
some inconsistent state, can generate other than rfkill interrupts
and crash the system. I can reproduce crash with "kernel BUG at
drivers/net/wireless/iwlwifi/iwl-agn.c:1010!" message, when forcing
firmware restarts.
To fix only enable rfkill interrupt when down device and after probe.
I checked patch on laptop with 5100 device, rfkill change is still
passed to user space when device is down.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 244b7f557447aafbe3bae0d3c25665fc5826b3b4
Author: Denis Kirjanov <dkirjanov@kernel.org>
Date: Mon Jan 10 20:09:30 2011 +0000
staging: rt2860: Fix incorrect netif_stop_queue usage warning
commit 9c33008412683eba91bce2dc4575f28c728b6bd1 upstream.
The TX queues are allocated inside register_netdev.
It doesn't make any sense to stop the queue before
allocation.
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7ce49687d7af34535dd4a72f35b81270db822504
Author: Chen, Chien-Chia <machen@novell.com>
Date: Thu Dec 9 10:52:08 2010 +0800
Staging: rt2860: fix previous patch error
commit 1f0613158ea14b399fd7a16470630a729ba9d0c3 upstream.
Somehow Greg messed up the last patch and missed a chunk. This patch
contains the missing chunk.
Acked-by: Chun-Yi Lee <jlee@novell.com>
Signed-off-by: Chien-Chia Chen <machen@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 446fcbf1b8487ecec8bab92064da83b6341b33b8
Author: Chen, Chien-Chia <machen@novell.com>
Date: Wed Dec 8 14:20:33 2010 -0800
Staging: rt3090: Fix RT3090 scan AP function
commit 1226056d9608d241db4b558a0d88a347ad5c66ae upstream.
Fix RT3090 scan AP function.
This patch fixes the rt3090 wireless module failed
to scan AP around due to Windows driver causing
rt3090 module unable to scan AP in Linux.
Acked-by: Chun-Yi Lee <jlee@novell.com>
Signed-off-by: Chien-Chia Chen <machen@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 53798a65764d6ff1ce4c83263a2a2d1b621b7f29
Author: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Mon Mar 8 12:25:15 2010 +0100
hvc_iucv: allocate memory buffers for IUCV in zone DMA
commit 91a970d9889c7d6f451ee91ed361d0f0119d3778 upstream.
The device driver must allocate memory for IUCV buffers with GFP_DMA,
because IUCV cannot address memory above 2GB (31bit addresses only).
Because the IUCV ignores the higher bits of the address, sending and
receiving IUCV data with this driver might cause memory corruptions.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: maximilian attems <max@stro.at>
commit 6e725f28b5c4298e06917269a7a7d33993f320cc
Author: Ky Srinivasan <ksrinivasan@novell.com>
Date: Thu Dec 16 18:59:19 2010 -0700
Staging: hv: fix sysfs symlink on hv block device
commit 268eff909afaca93188d2d14554cbf824f6a0e41 upstream.
The block device does not create the proper symlink in sysfs because we
forgot to set up the gendisk structure properly. This patch fixes the
issue.
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d436369c4c603f565358caab080633a926345f82
Author: Ian Abbott <abbotti@mev.co.uk>
Date: Wed Jan 19 11:48:44 2011 +0000
staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
commit d1ce318496f5943d2cc5e20171fc383a59a1421f upstream.
The ni_labpc driver module only requests a shared IRQ for PCI devices,
requesting a non-shared IRQ for non-PCI devices.
As this module is also used by the ni_labpc_cs module for certain
National Instruments PCMCIA cards, it also needs to request a shared IRQ
for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus
controller.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 51280e163d177b1d249fb7d4a6338c14cafde258
Author: Ruben Smits <ruben.smits@mech.kuleuven.be>
Date: Sat Dec 11 08:26:18 2010 +0100
staging: comedi: add support for newer jr3 1-channel pci board
commit 6292817d58637f85dd623cfe563c7f5ec4f4c470 upstream.
add DEVICE_ID to table
Signed-off-by: Ruben Smits <ruben.smits@mech.kuleuven.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6c8f7afcfad689a63dfed43743911fcb24401978
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Mon Jan 31 10:56:37 2011 -0500
USB: prevent buggy hubs from crashing the USB stack
commit d199c96d41d80a567493e12b8e96ea056a1350c1 upstream.
If anyone comes across a high-speed hub that (by mistake or by design)
claims to have no Transaction Translators, plugging a full- or
low-speed device into it will cause the USB stack to crash. This
patch (as1446) prevents the problem by ignoring such devices, since
the kernel has no way to communicate with them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Perry Neben <neben@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0d4ea2f83aff8517b10cafe4b14577d9bed68584
Author: Michael Williamson <michael.h.williamson@gmail.com>
Date: Thu Jan 27 18:36:19 2011 -0600
USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrograph
commit 28fe2eb0162a1d23370dd99ff7d0e35632b1ee91 upstream.
Add the USB Vendor ID and Product ID for a Acton Research Corp.
spectrograph device with a FTDI chip for serial I/O.
Signed-off-by: Michael H Williamson <michael.h.williamson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 47bd2812767dae51ea0690a71e7f2cd3919eaf98
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Jan 29 15:32:52 2011 +0100
USB: ftdi_sio: add ST Micro Connect Lite uart support
commit 6ec2f46c4b4abf48c88c0ae7c476f347b97e1105 upstream.
on ST Micro Connect Lite we have 4 port
Part A and B for the JTAG
Port C Uart
Port D for PIO
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d7927020981261937c206601d7bfc9556e896ce6
Author: Nick Holloway <Nick.Holloway@pyrites.org.uk>
Date: Wed Jan 26 21:47:43 2011 +0000
USB: Storage: Add unusual_devs entry for VTech Kidizoom
commit c25f6b1591b158f7ae3b9132367d0fa6d632e70e upstream.
This device suffers from the off-by-one error when reporting the capacity,
so add entry with US_FL_FIX_CAPACITY.
Signed-off-by: Nick Holloway <Nick.Holloway@pyrites.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0c7d6cd9b045d8163accf173ddb19074d3d0fd94
Author: Ionut Nicu <ionut.nicu@gmail.com>
Date: Tue Dec 28 22:21:08 2010 +0200
USB: ti_usb: fix module removal
commit b14de3857227cd978f515247853fd15cc2425d3e upstream.
If usb_deregister() is called after usb_serial_deregister() when
the device is plugged in, the following Oops occurs:
[ 95.337377] BUG: unable to handle kernel NULL pointer dereference at 00000010
[ 95.338236] IP: [<c0776b2d>] klist_put+0x12/0x62
[ 95.338356] *pdpt = 000000003001a001 *pde = 0000000000000000
[ 95.338356] Oops: 0000 [#1] SMP
[ 95.340499] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb8/idVendor
[ 95.340499] Modules linked in: ti_usb_3410_5052(-) usbserial cpufreq_ondemand acpi_cpufreq mperf iptable_nat nf_nat iptable_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipv6 uinput arc4 ecb iwlagn iwlcore mac80211 cfg80211 microcode pcspkr acer_wmi joydev wmi sky2 [last unloaded: scsi_wait_scan]
[ 95.341908]
[ 95.341908] Pid: 1532, comm: modprobe Not tainted 2.6.37-rc7+ #6 Eiger /Aspire 5930
[ 95.341908] EIP: 0060:[<c0776b2d>] EFLAGS: 00010246 CPU: 0
[ 95.341908] EIP is at klist_put+0x12/0x62
[ 95.341908] EAX: 00000000 EBX: eedc0c84 ECX: c09c21b4 EDX: 00000001
[ 95.341908] ESI: 00000000 EDI: efaa0c1c EBP: f214fe2c ESP: f214fe1c
[ 95.341908] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 95.341908] Process modprobe (pid: 1532, ti=f214e000 task=efaaf080 task.ti=f214e000)
[ 95.341908] Stack:
[ 95.341908] f214fe24 eedc0c84 efaaf080 efaa0c1c f214fe34 c0776ba8 f214fe5c c0776c76
[ 95.341908] c09c21b4 c09c21b4 eedc0c84 efaaf080 00000000 c0634398 eafe2d1c f7b515f0
[ 95.341908] f214fe6c c0631b5c eafe2d50 eafe2d1c f214fe7c c0631ba2 eafe2d1c eafe2c00
[ 95.341908] Call Trace:
[ 95.341908] [<c0776ba8>] ? klist_del+0xd/0xf
[ 95.341908] [<c0776c76>] ? klist_remove+0x48/0x74
[ 95.341908] [<c0634398>] ? devres_release_all+0x49/0x51
[ 95.341908] [<c0631b5c>] ? __device_release_driver+0x7b/0xa4
[ 95.341908] [<c0631ba2>] ? device_release_driver+0x1d/0x28
[ 95.341908] [<c06317c4>] ? bus_remove_device+0x92/0xa1
[ 95.341908] [<c062f3d8>] ? device_del+0xf9/0x13e
[ 95.341908] [<f7b06146>] ? usb_serial_disconnect+0xd9/0x116 [usbserial]
[ 95.341908] [<c0681e3f>] ? usb_disable_interface+0x32/0x40
[ 95.341908] [<c0683972>] ? usb_unbind_interface+0x48/0xfd
[ 95.341908] [<c0631b43>] ? __device_release_driver+0x62/0xa4
[ 95.341908] [<c06320b9>] ? driver_detach+0x62/0x81
[ 95.341908] [<c0631a41>] ? bus_remove_driver+0x8f/0xae
[ 95.341908] [<c063214c>] ? driver_unregister+0x50/0x57
[ 95.341908] [<c0682f95>] ? usb_deregister+0x77/0x84
[ 95.341908] [<f7b505b6>] ? ti_exit+0x26/0x28 [ti_usb_3410_5052]
[ 95.341908] [<c046a307>] ? sys_delete_module+0x181/0x1de
[ 95.341908] [<c04e2727>] ? path_put+0x1a/0x1d
[ 95.341908] [<c047f4c5>] ? audit_syscall_entry+0x116/0x138
[ 95.341908] [<c04094df>] ? sysenter_do_call+0x12/0x28
[ 95.341908] Code: 00 83 7d f0 00 74 09 85 f6 74 05 89 f0 ff 55 f0 8b 43 04 5a 5b 5e 5f 5d c3 55 89 e5 57 56 53 89 c3 83 ec 04 8b 30 83 e6 fe 89 f0 <8b> 7e 10 88 55 f0 e8 47 26 01 00 8a 55 f0 84 d2 74 17 f6 03 01
[ 95.341908] EIP: [<c0776b2d>] klist_put+0x12/0x62 SS:ESP 0068:f214fe1c
[ 95.341908] CR2: 0000000000000010
[ 95.342357] ---[ end trace 8124d00ad871ad18 ]---
Signed-off-by: Ionut Nicu <ionut.nicu@mindbit.ro>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b282a1e7f1adc5e7bc21c7d4c0f16610984fc63d
Author: Bjørn Mork <bjorn@mork.no>
Date: Mon Jan 17 14:19:37 2011 +0100
USB: io_edgeport: fix the reported firmware major and minor
commit 271c1150b4f8e1685e5a8cbf76e329ec894481da upstream.
The major and minor number saved in the product_info structure
were copied from the address instead of the data, causing an
inconsistency in the reported versions during firmware loading:
usb 4-1: firmware: requesting edgeport/down.fw
/usr/src/linux/drivers/usb/serial/io_edgeport.c: downloading firmware version (930) 1.16.4
[..]
/usr/src/linux/drivers/usb/serial/io_edgeport.c: edge_startup - time 3 4328191260
/usr/src/linux/drivers/usb/serial/io_edgeport.c: FirmwareMajorVersion 0.0.4
This can cause some confusion whether firmware loaded successfully
or not.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0f806c0914f85dc926193871a1435773418ffe2e
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Mon Jan 10 11:24:14 2011 -0500
USB: g_printer: fix bug in module parameter definitions
commit ad84e4a9efb7c8ed322bafb6ebdb9c3a49a3d3a8 upstream.
This patch (as1442) fixes a bug in g_printer: Module parameters should
not be marked "__initdata" if they are accessible in sysfs (i.e., if
the mode value in the module_param() macro is nonzero). Otherwise
attempts to access the parameters will cause addressing violations.
Character-string module parameters must not be marked "__initdata"
if the module can be unloaded, because the kernel needs to access the
parameter variable at unload time in order to free the
dynamically-allocated string.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Roland Kletzing <devzero@web.de>
CC: Craig W. Nadler <craig@nadler.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4e6cff8669426db49452e3ab475e3c88239954c4
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Thu Jan 6 10:17:09 2011 -0500
USB: EHCI: fix DMA deallocation bug
commit f75593ceaa08e6d27aec1a5de31cded19e850dd1 upstream.
This patch (as1440) fixes a bug in ehci-hcd. ehci->periodic_size is
used to compute the size in a dma_alloc_coherent() call, but then it
gets changed later on. As a result, the corresponding call to
dma_free_coherent() passes a different size from the original
allocation. Fix the problem by adjusting ehci->periodic_size before
carrying out any of the memory allocations.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit eeffda606e0e1b1c1c949a75d8c73a99f0f0637c
Author: Pieter Maes <maescool@gmail.com>
Date: Tue Jan 18 00:26:16 2011 +0100
USB: serial: Updated support for ICOM devices
commit a9d61bc49188e32d2ae9cf0f683cde3e1744feef upstream.
I found the original patch on the db0fhn repeater wiki (couldn't find the email
of the origial author) I guess it was never commited.
I updated and added some Icom HAM-radio devices to the ftdi driver.
Added extra comments to make clear what devices it are.
Signed-off-by: Pieter Maes <maescool@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 18cadc7d1232e5d4c2fea5c4f823052c20433343
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Tue Jan 25 13:07:04 2011 -0500
USB: usb-storage: unusual_devs entry for Coby MP3 player
commit 3ea3c9b5a8464ec8223125f95e5dddb3bfd02a39 upstream.
This patch (as1444) adds an unusual_devs entry for an MP3 player from
Coby electronics. The device has two nasty bugs.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Jasper Mackenzie <scarletpimpernal@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7cfff59cda0dfb023ad28482081824bdff1187e2
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Mon Jan 3 16:47:49 2011 -0500
USB: usb-storage: unusual_devs entry for CamSport Evo
commit 12f68c480c7155a66bd2a76ab2fef28dd5f93fa2 upstream.
This patch (as1438) adds an unusual_devs entry for the MagicPixel
FW_Omega2 chip, used in the CamSport Evo camera. The firmware
incorrectly reports a vendor-specific bDeviceClass.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: <ttkspam@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3812b5655a5a96cf2d8bb889aa3f649ea6079fc3
Author: Richard Schütz <r.schtz@t-online.de>
Date: Wed Dec 22 14:28:56 2010 +0100
USB: usb-storage: unusual_devs update for TrekStor DataStation maxi g.u external hard drive enclosure
commit 7e1e7bd9dbd469267b6e6de1bf8d71a7d65ce86a upstream.
The TrekStor DataStation maxi g.u external hard drive enclosure uses a
JMicron USB to SATA chip which needs the US_FL_IGNORE_RESIDUE flag to work
properly.
Signed-off-by: Richard Schütz <r.schtz@t-online.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6ebb7dbbb6398177a3f3acb51cf0b6464f32cfcc
Author: Richard Schütz <r.schtz@t-online.de>
Date: Sun Dec 19 21:18:38 2010 +0100
USB: usb-storage: unusual_devs update for Cypress ATACB
commit cae41118f50ef0c431e13159df6d7dd8bbd54004 upstream.
New device ID added for unusual Cypress ATACB device.
Signed-off-by: Richard Schütz <r.schtz@t-online.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a9e7807087ec156943c6e40405626bcbb8167f27
Author: Oleg Nesterov <oleg@redhat.com>
Date: Fri Nov 5 16:53:42 2010 +0100
posix-cpu-timers: workaround to suppress the problems with mt exec
commit e0a70217107e6f9844628120412cb27bb4cea194 upstream.
posix-cpu-timers.c correctly assumes that the dying process does
posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD
timers from signal->cpu_timers list.
But, it also assumes that timer->it.cpu.task is always the group
leader, and thus the dead ->task means the dead thread group.
This is obviously not true after de_thread() changes the leader.
After that almost every posix_cpu_timer_ method has problems.
It is not simple to fix this bug correctly. First of all, I think
that timer->it.cpu should use struct pid instead of task_struct.
Also, the locking should be reworked completely. In particular,
tasklist_lock should not be used at all. This all needs a lot of
nontrivial and hard-to-test changes.
Change __exit_signal() to do posix_cpu_timers_exit_group() when
the old leader dies during exec. This is not the fix, just the
temporary hack to hide the problem for 2.6.37 and stable. IOW,
this is obviously wrong but this is what we currently have anyway:
cpu timers do not work after mt exec.
In theory this change adds another race. The exiting leader can
detach the timers which were attached to the new leader. However,
the window between de_thread() and release_task() is small, we
can pretend that sys_timer_create() was called before de_thread().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ad801fa0f9c4c08c75c506cc5d3cd0ab18a6ded3
Author: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Thu May 6 00:56:07 2010 -0700
sctp: Fix a race between ICMP protocol unreachable and connect()
commit 50b5d6ad63821cea324a5a7a19854d4de1a0a819 upstream.
ICMP protocol unreachable handling completely disregarded
the fact that the user may have locked the socket. It proceeded
to destroy the association, even though the user may have
held the lock and had a ref on the association. This resulted
in the following:
Attempt to release alive inet socket f6afcc00
=========================
[ BUG: held lock freed! ]
-------------------------
somenu/2672 is freeing memory f6afcc00-f6afcfff, with a lock still held
there!
(sk_lock-AF_INET){+.+.+.}, at: [<c122098a>] sctp_connect+0x13/0x4c
1 lock held by somenu/2672:
#0: (sk_lock-AF_INET){+.+.+.}, at: [<c122098a>] sctp_connect+0x13/0x4c
stack backtrace:
Pid: 2672, comm: somenu Not tainted 2.6.32-telco #55
Call Trace:
[<c1232266>] ? printk+0xf/0x11
[<c1038553>] debug_check_no_locks_freed+0xce/0xff
[<c10620b4>] kmem_cache_free+0x21/0x66
[<c1185f25>] __sk_free+0x9d/0xab
[<c1185f9c>] sk_free+0x1c/0x1e
[<c1216e38>] sctp_association_put+0x32/0x89
[<c1220865>] __sctp_connect+0x36d/0x3f4
[<c122098a>] ? sctp_connect+0x13/0x4c
[<c102d073>] ? autoremove_wake_function+0x0/0x33
[<c12209a8>] sctp_connect+0x31/0x4c
[<c11d1e80>] inet_dgram_connect+0x4b/0x55
[<c11834fa>] sys_connect+0x54/0x71
[<c103a3a2>] ? lock_release_non_nested+0x88/0x239
[<c1054026>] ? might_fault+0x42/0x7c
[<c1054026>] ? might_fault+0x42/0x7c
[<c11847ab>] sys_socketcall+0x6d/0x178
[<c10da994>] ? trace_hardirqs_on_thunk+0xc/0x10
[<c1002959>] syscall_call+0x7/0xb
This was because the sctp_wait_for_connect() would aqcure the socket
lock and then proceed to release the last reference count on the
association, thus cause the fully destruction path to finish freeing
the socket.
The simplest solution is to start a very short timer in case the socket
is owned by user. When the timer expires, we can do some verification
and be able to do the release properly.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit de5e8ac404e76cbbd634ea60f974325d26c9b3d8
Author: Daniel T Chen <crimsun@ubuntu.com>
Date: Tue Dec 28 17:20:02 2010 -0500
ALSA: hda: Use LPIB quirk for Dell Inspiron m101z/1120
commit e03fa055bc126e536c7f65862e08a9b143138ea9 upstream.
Sjoerd Simons reports that, without using position_fix=1, recording
experiences overruns. Work around that by applying the LPIB quirk
for his hardware.
Reported-and-tested-by: Sjoerd Simons <sjoerd@debian.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e2dc4ebe9b764f832943e0997a5599709a4340a0
Author: Mimi Zohar <zohar@linux.vnet.ibm.com>
Date: Mon Jan 3 14:59:10 2011 -0800
ima: fix add LSM rule bug
commit 867c20265459d30a01b021a9c1e81fb4c5832aa9 upstream.
If security_filter_rule_init() doesn't return a rule, then not everything
is as fine as the return code implies.
This bug only occurs when the LSM (eg. SELinux) is disabled at runtime.
Adding an empty LSM rule causes ima_match_rules() to always succeed,
ignoring any remaining rules.
default IMA TCB policy:
# PROC_SUPER_MAGIC
dont_measure fsmagic=0x9fa0
# SYSFS_MAGIC
dont_measure fsmagic=0x62656572
# DEBUGFS_MAGIC
dont_measure fsmagic=0x64626720
# TMPFS_MAGIC
dont_measure fsmagic=0x01021994
# SECURITYFS_MAGIC
dont_measure fsmagic=0x73636673
< LSM specific rule >
dont_measure obj_type=var_log_t
measure func=BPRM_CHECK
measure func=FILE_MMAP mask=MAY_EXEC
measure func=FILE_CHECK mask=MAY_READ uid=0
Thus without the patch, with the boot parameters 'tcb selinux=0', adding
the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB
measurement policy, would result in nothing being measured. The patch
prevents the default TCB policy from being replaced.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: David Safford <safford@watson.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 32dc3265772c1d7930a4f5e4e679c23db8a14afa
Author: Saeed Bishara <saeed@marvell.com>
Date: Tue Dec 21 16:53:39 2010 +0200
mv_xor: fix race in tasklet function
commit 8333f65ef094e47020cd01452b4637e7daf5a77f upstream.
use mv_xor_slot_cleanup() instead of __mv_xor_slot_cleanup() as the former function
aquires the spin lock that needed to protect the drivers data.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0dd40482f3d6bf04eb477c14d9e9443a3d59f1e9
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Sat Dec 25 16:23:40 2010 -0500
sound: Prevent buffer overflow in OSS load_mixer_volumes
commit d81a12bc29ae4038770e05dce4ab7f26fd5880fb upstream.
The load_mixer_volumes() function, which can be triggered by
unprivileged users via the SOUND_MIXER_SETLEVELS ioctl, is vulnerable to
a buffer overflow. Because the provided "name" argument isn't
guaranteed to be NULL terminated at the expected 32 bytes, it's possible
to overflow past the end of the last element in the mixer_vols array.
Further exploitation can result in an arbitrary kernel write (via
subsequent calls to load_mixer_volumes()) leading to privilege
escalation, or arbitrary kernel reads via get_mixer_levels(). In
addition, the strcmp() may leak bytes beyond the mixer_vols array.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d7d4c798c903b0463787c21a5a2f41ccebb026b8
Author: Eduardo Costa <ecosta.tmp@gmail.com>
Date: Tue Dec 14 14:37:59 2010 -0600
p54usb: New USB ID for Gemtek WUBI-100GW
commit 56e6417b49132d4f56e9f2241d31942b90b46315 upstream.
This USB ID is for the WUBI-100GW 802.11g Wireless LAN USB Device that
uses p54usb.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Eduardo Costa <ecosta.tmp@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 852a8f2368659f67667064f55517bb6e977b73ff
Author: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat Dec 11 12:19:48 2010 +0100
p54usb: add 5 more USBIDs
commit 16cad7fba037b34ca32cc0adac65bc089d969fb8 upstream.
This patch adds five more USBIDs to the table.
Source:
http://www.linuxant.com/pipermail/driverloader/2005q3/002307.html
http://wireless.kernel.org/en/users/Drivers/p54/devices (by M. Davis)
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f5884ae8ee8fcdeebd58ccdbc89de6013b8f02be
Author: Vitaly Kuznetsov <vitty@altlinux.ru>
Date: Tue Dec 14 10:16:49 2010 -0500
USB: usb-storage: unusual_devs entry for the Samsung YP-CP3
commit d73a9b3001f29271c2e9f2a806b05a431c5d9591 upstream.
Add an unusual_devs entry for the Samsung YP-CP3 MP4 player.
User was getting the following errors in dmesg:
usb 2-6: reset high speed USB device using ehci_hcd and address 2
usb 2-6: reset high speed USB device using ehci_hcd and address 2
usb 2-6: reset high speed USB device using ehci_hcd and address 2
usb 2-6: USB disconnect, address 2
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb:<2>ldm_validate_partition_table(): Disk read failed.
Dev sdb: unable to read RDB block 0
unable to read partition table
Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2e3e89747b2a4fb4e85e8f5ec0388b9910fb67d2
Author: Thomas Sailer <t.sailer@alumni.ethz.ch>
Date: Tue Dec 14 16:04:05 2010 +0100
USB: misc: uss720.c: add another vendor/product ID
commit ecc1624a2fff45780959efbcb73ace18fdb3c58d upstream.
Fabio Battaglia report that he has another cable that works with this
driver, so this patch adds its vendor/product ID.
Signed-off-by: Thomas Sailer <t.sailer@alumni.ethz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b59f4c4209aadca12cc049baf9f9cb2f0c215f5b
Author: Tavis Ormandy <taviso@cmpxchg8b.com>
Date: Thu Dec 9 15:29:42 2010 +0100
install_special_mapping skips security_file_mmap check.
commit 462e635e5b73ba9a4c03913b77138cd57ce4b050 upstream.
The install_special_mapping routine (used, for example, to setup the
vdso) skips the security check before insert_vm_struct, allowing a local
attacker to bypass the mmap_min_addr security restriction by limiting
the available pages for special mappings.
bprm_mm_init() also skips the check, and although I don't think this can
be used to bypass any restrictions, I don't see any reason not to have
the security check.
$ uname -m
x86_64
$ cat /proc/sys/vm/mmap_min_addr
65536
$ cat install_special_mapping.s
section .bss
resb BSS_SIZE
section .text
global _start
_start:
mov eax, __NR_pause
int 0x80
$ nasm -D__NR_pause=29 -DBSS_SIZE=0xfffed000 -f elf -o install_special_mapping.o install_special_mapping.s
$ ld -m elf_i386 -Ttext=0x10000 -Tbss=0x11000 -o install_special_mapping install_special_mapping.o
$ ./install_special_mapping &
[1] 14303
$ cat /proc/14303/maps
0000f000-00010000 r-xp 00000000 00:00 0 [vdso]
00010000-00011000 r-xp 00001000 00:19 2453665 /home/taviso/install_special_mapping
00011000-ffffe000 rwxp 00000000 00:00 0 [stack]
It's worth noting that Red Hat are shipping with mmap_min_addr set to
4096.
Signed-off-by: Tavis Ormandy <taviso@google.com>
Acked-by: Kees Cook <kees@ubuntu.com>
Acked-by: Robert Swiecki <swiecki@google.com>
[ Changed to not drop the error code - akpm ]
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4550dcca25723fb3014d4a352eed5aa6f472245b
Author: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Tue Mar 23 18:35:18 2010 +0000
igb: only use vlan_gro_receive if vlans are registered
commit 31b24b955c3ebbb6f3008a6374e61cf7c05a193c upstream.
This change makes it so that vlan_gro_receive is only used if vlans have been
registered to the adapter structure. Previously we were just sending all vlan
tagged frames in via this function but this results in a null pointer
dereference when vlans are not registered.
[ This fixes bugzilla entry 15582 -Eric Dumazet]
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7cb215ebdfc6c255129f5baff525a2abd7237f0e
Author: Krishna Gudipati <kgudipat@brocade.com>
Date: Fri May 21 14:39:45 2010 -0700
bfa: fix system crash when reading sysfs fc_host statistics
commit 7873ca4e4401f0ecd8868bf1543113467e6bae61 upstream.
The port data structure related to fc_host statistics collection is
not initialized. This causes system crash when reading the fc_host
statistics. The fix is to initialize port structure during driver
attach.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 15bd914890cca7434047276c77e4962d93fb3a62
Author: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Mon Dec 6 12:26:30 2010 -0800
x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic
commit 254e42006c893f45bca48f313536fcba12206418 upstream.
On platforms with Intel 7500 chipset, there were some reports of system
hang/NMI's during kexec/kdump in the presence of interrupt-remapping enabled.
During kdump, there is a window where the devices might be still using old
kernel's interrupt information, while the kdump kernel is coming up. This can
cause vt-d faults as the interrupt configuration from the old kernel map to
null IRTE entries in the new kernel etc. (with out interrupt-remapping enabled,
we still have the same issue but in this case we will see benign spurious
interrupt hit the new kernel).
Based on platform config settings, these platforms seem to generate NMI/SMI
when a vt-d fault happens and there were reports that the resulting SMI causes
the system to hang.
Fix it by masking vt-d spec defined errors to platform error reporting logic.
VT-d spec related errors are already handled by the VT-d OS code, so need to
report the same error through other channels.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1291667190.2675.8.camel@sbsiddha-MOBL3.sc.intel.com>
Reported-by: Max Asbock <masbock@linux.vnet.ibm.com>
Reported-and-tested-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0b480c14fdaa8d8113daf586ba351ae036934bbb
Author: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Date: Wed Dec 1 09:40:32 2010 -0800
x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode
commit 086e8ced65d9bcc4a8e8f1cd39b09640f2883f90 upstream.
In x2apic mode, we need to set the upper address register of the fault
handling interrupt register of the vt-d hardware. Without this
irq migration of the vt-d fault handling interrupt is broken.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
LKML-Reference: <1291225233.2648.39.camel@sbsiddha-MOBL3>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Tested-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b1b82a34ab0b647e7df0367f9cbe5c96a7b4dd0c
Author: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Tue Nov 30 22:22:29 2010 -0800
x86, vt-d: Handle previous faults after enabling fault handling
commit 7f99d946e71e71d484b7543b49e990508e70d0c0 upstream.
Fault handling is getting enabled after enabling the interrupt-remapping (as
the success of interrupt-remapping can affect the apic mode and hence the
fault handling mode).
Hence there can potentially be some faults between the window of enabling
interrupt-remapping in the vt-d and the fault-handling of the vt-d units.
Handle any previous faults after enabling the vt-d fault handling.
For v2.6.38 cleanup, need to check if we can remove the dmar_fault() in the
enable_intr_remapping() and see if we can enable fault handling along with
enabling intr-remapping.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20101201062244.630417138@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 64d19b04aeea1585b1f4808d5b962218eb607992
Author: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Date: Tue Nov 30 22:22:28 2010 -0800
x86: Enable the intr-remap fault handling after local APIC setup
commit 7f7fbf45c6b748074546f7f16b9488ca71de99c1 upstream.
Interrupt-remapping gets enabled very early in the boot, as it determines the
apic mode that the processor can use. And the current code enables the vt-d
fault handling before the setup_local_APIC(). And hence the APIC LDR registers
and data structure in the memory may not be initialized. So the vt-d fault
handling in logical xapic/x2apic modes were broken.
Fix this by enabling the vt-d fault handling in the end_local_APIC_setup()
A cleaner fix of enabling fault handling while enabling intr-remapping
will be addressed for v2.6.38. [ Enabling intr-remapping determines the
usage of x2apic mode and the apic mode determines the fault-handling
configuration. ]
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
LKML-Reference: <20101201062244.541996375@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f0d5275394231c918760612ad5ea1992b64353a0
Author: H. Peter Anvin <hpa@linux.intel.com>
Date: Mon Dec 13 16:01:38 2010 -0800
x86, gcc-4.6: Use gcc -m options when building vdso
commit de2a8cf98ecdde25231d6c5e7901e2cffaf32af9 upstream.
The vdso Makefile passes linker-style -m options not to the linker but
to gcc. This happens to work with earlier gcc, but fails with gcc
4.6. Pass gcc-style -m options, instead.
Note: all currently supported versions of gcc supports -m32, so there
is no reason to conditionalize it any more.
Reported-by: H. J. Lu <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-*@git.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b5d59533fbb7c72bc1e87fa0a96d51d7a45e1c25
Author: Slava Pestov <slavapestov@google.com>
Date: Wed Nov 24 15:13:16 2010 -0800
tracing: Fix panic when lseek() called on "trace" opened for writing
commit 364829b1263b44aa60383824e4c1289d83d78ca7 upstream.
The file_ops struct for the "trace" special file defined llseek as seq_lseek().
However, if the file was opened for writing only, seq_open() was not called,
and the seek would dereference a null pointer, file->private_data.
This patch introduces a new wrapper for seq_lseek() which checks if the file
descriptor is opened for reading first. If not, it does nothing.
Signed-off-by: Slava Pestov <slavapestov@google.com>
LKML-Reference: <1290640396-24179-1-git-send-email-slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1aed660d993eed0586440bcee66754315a8aae01
Author: NeilBrown <neilb@suse.de>
Date: Thu Dec 9 16:36:28 2010 +1100
md: fix bug with re-adding of partially recovered device.
commit 1a855a0606653d2d82506281e2c686bacb4b2f45 upstream.
With v0.90 metadata, a hot-spare does not become a full member of the
array until recovery is complete. So if we re-add such a device to
the array, we know that all of it is as up-to-date as the event count
would suggest, and so it a bitmap-based recovery is possible.
However with v1.x metadata, the hot-spare immediately becomes a full
member of the array, but it record how much of the device has been
recovered. If the array is stopped and re-assembled recovery starts
from this point.
When such a device is hot-added to an array we currently lose the 'how
much is recovered' information and incorrectly included it as a full
in-sync member (after bitmap-based fixup).
This is wrong and unsafe and could corrupt data.
So be more careful about setting saved_raid_disk - which is what
guides the re-adding of devices back into an array.
The new code matches the code in slot_store which does a similar
thing, which is encouraging.
This is suitable for any -stable kernel.
Reported-by: "Dailey, Nate" <Nate.Dailey@stratus.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0c103939c31777a5ca08c418faaf1ce6e5f47479
Author: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu Dec 16 21:29:37 2010 +0100
x86, amd: Fix panic on AMD CPU family 0x15
[The mainline kernel doesn't have this problem. Commit "(23588c3) x86,
amd: Add support for CPUID topology extension of AMD CPUs" removed the
family check. But 2.6.32.y needs to be fixed.]
This CPU family check is not required -- existence of the NodeId MSR
is indicated by a CPUID feature flag which is already checked in
amd_fixup_dcm() -- and it needlessly prevents amd_fixup_dcm() to be
called for newer AMD CPUs.
In worst case this can lead to a panic in the scheduler code for AMD
family 0x15 multi-node AMD CPUs. I just have a picture of VGA console
output so I can't copy-and-paste it herein, but the call stack of such
a panic looked like:
do_divide_error
...
find_busiest_group
run_rebalance_domains
...
apic_timer_interrupt
...
cpu_idle
The mainline kernel doesn't have this problem. Commit "(23588c3) x86,
amd: Add support for CPUID topology extension of AMD CPUs" removed the
family check. But 2.6.32.y needs to be fixed.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d5f0c1fcd3b2e22a23c51d9f64fa959b90022098
Author: David Kilroy <kilroyd@googlemail.com>
Date: Sun Dec 5 15:45:58 2010 +0000
orinoco: clear countermeasure setting on commit
commit ba34fcee476d11e7c9df95932787a22a96ff6e68 upstream.
... and interface up.
In these situations, you are usually trying to connect to a new AP, so
keeping TKIP countermeasures active is confusing. This is already how
the driver behaves (inadvertently). However, querying SIOCGIWAUTH may
tell userspace that countermeasures are active when they aren't.
Clear the setting so that the reporting matches what the driver has
done..
Signed-off by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 005a1438d438d342b41e7aa1441c5a8e606cab8a
Author: David Kilroy <kilroyd@googlemail.com>
Date: Sun Dec 5 15:43:55 2010 +0000
orinoco: fix TKIP countermeasure behaviour
commit 0a54917c3fc295cb61f3fb52373c173fd3b69f48 upstream.
Enable the port when disabling countermeasures, and disable it on
enabling countermeasures.
This bug causes the response of the system to certain attacks to be
ineffective.
It also prevents wpa_supplicant from getting scan results, as
wpa_supplicant disables countermeasures on startup - preventing the
hardware from scanning.
wpa_supplicant works with ap_mode=2 despite this bug because the commit
handler re-enables the port.
The log tends to look like:
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
Scan requested (ret=0) - scan timeout 5 seconds
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
Scan timeout - try to get results
Failed to get scan results
Failed to get scan results - try scanning again
Setting scan request: 1 sec 0 usec
Starting AP scan for wildcard SSID
Scan requested (ret=-1) - scan timeout 5 seconds
Failed to initiate AP scan.
Reported by: Giacomo Comes <comes@naic.edu>
Signed-off by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8ac3202ab76acd2370ac49ab5232c317d93fc8e2
Author: Bob Moore <robert.moore@intel.com>
Date: Sat Oct 23 01:36:40 2010 -0400
ACPICA: Fix Scope() op in module level code
commit 8df3fc981dc12d9fdcaef4100a2193b605024d7a upstream.
Some Panasonic Toughbooks create nodes in module level code.
Module level code is the executable AML code outside of control method,
for example, below AML code creates a node \_SB.PCI0.GFX0.DD02.CUBL
If (\_OSI ("Windows 2006"))
{
Scope (\_SB.PCI0.GFX0.DD02)
{
Name (CUBL, Ones)
...
}
}
Scope() op does not actually create a new object, it refers to an
existing object(\_SB.PCI0.GFX0.DD02 in above example). However, for
Scope(), we want to indeed open a new scope, so the child nodes(CUBL in
above example) can be created correctly under it.
https://bugzilla.kernel.org/show_bug.cgi?id=19462
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 40d5940db8efa1aa65d1b5f140d6114c437e06e9
Author: Alexey Starikovskiy <astarikovskiy@suse.de>
Date: Thu Dec 9 17:07:54 2010 -0500
ACPI: EC: Add another dmi match entry for MSI hardware
commit a5dc4f898c2a0f66e2cefada6c687db82ba2fcbc upstream.
http://bugzilla.kernel.org/show_bug.cgi?id=15418
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 15b81eb89180441e82557ec77ac09f8ab6198072
Author: Takashi Iwai <tiwai@suse.de>
Date: Fri Dec 10 00:16:39 2010 +0100
PM / Hibernate: Fix PM_POST_* notification with user-space suspend
commit 1497dd1d29c6a53fcd3c80f7ac8d0e0239e7389e upstream.
The user-space hibernation sends a wrong notification after the image
restoration because of thinko for the file flag check. RDONLY
corresponds to hibernation and WRONLY to restoration, confusingly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit db1aac64b2783fa1103289b48a6766afd5746eda
Author: Dan Carpenter <error27@gmail.com>
Date: Wed Oct 13 09:13:12 2010 +0000
IB/uverbs: Handle large number of entries in poll CQ
commit 7182afea8d1afd432a17c18162cc3fd441d0da93 upstream.
In ib_uverbs_poll_cq() code there is a potential integer overflow if
userspace passes in a large cmd.ne. The calls to kmalloc() would
allocate smaller buffers than intended, leading to memory corruption.
There iss also an information leak if resp wasn't all used.
Unprivileged userspace may call this function, although only if an
RDMA device that uses this function is present.
Fix this by copying CQ entries one at a time, which avoids the
allocation entirely, and also by moving this copying into a function
that makes sure to initialize all memory copied to userspace.
Special thanks to Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
for his help and advice.
Signed-off-by: Dan Carpenter <error27@gmail.com>
[ Monkey around with things a bit to avoid bad code generation by gcc
when designated initializers are used. - Roland ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 99278605842a40e431bf2b70f71ee76a337b59da
Author: Borislav Petkov <borislav.petkov@amd.com>
Date: Mon Dec 6 16:20:25 2010 +0100
amd64_edac: Fix interleaving check
commit e726f3c368e7c1919a7166ec09c5705759f1a69d upstream.
When matching error address to the range contained by one memory node,
we're in valid range when node interleaving
1. is disabled, or
2. enabled and when the address bits we interleave on match the
interleave selector on this node (see the "Node Interleaving" section in
the BKDG for an enlightening example).
Thus, when we early-exit, we need to reverse the compound logic
statement properly.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 495cc545c9059a8fdcc40eeb6584cb60c7620fbb
Author: Gabriele Gorla <gorlik@penguintown.net>
Date: Wed Dec 8 16:27:22 2010 +0100
hwmon: (adm1026) Fix setting fan_div
commit 52bc9802ce849d0d287cc5fe76d06b0daa3986ca upstream.
Prevent setting fan_div from stomping on other fans that share the
same I2C register.
Signed-off-by: Gabriele Gorla <gorlik@penguintown.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 37872b548dd2100728142f49421e679c51a6e85c
Author: Gabriele Gorla <gorlik@penguintown.net>
Date: Wed Dec 8 16:27:22 2010 +0100
hwmon: (adm1026) Allow 1 as a valid divider value
commit 8b0f1840a46449e1946fc88860ef3ec8d6b1c2c7 upstream.
Allow 1 as a valid div value as specified in the ADM1026 datasheet.
Signed-off-by: Gabriele Gorla <gorlik@penguintown.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7a1c91206aa602c9fb9f52279a2dc5c150c7ec77
Author: NeilBrown <neilb@suse.de>
Date: Tue Nov 16 16:55:19 2010 +1100
sunrpc: prevent use-after-free on clearing XPT_BUSY
commit ed2849d3ecfa339435818eeff28f6c3424300cec upstream.
When an xprt is created, it has a refcount of 1, and XPT_BUSY is set.
The refcount is *not* owned by the thread that created the xprt
(as is clear from the fact that creators never put the reference).
Rather, it is owned by the absence of XPT_DEAD. Once XPT_DEAD is set,
(And XPT_BUSY is clear) that initial reference is dropped and the xprt
can be freed.
So when a creator clears XPT_BUSY it is dropping its only reference and
so must not touch the xprt again.
However svc_recv, after calling ->xpo_accept (and so getting an XPT_BUSY
reference on a new xprt), calls svc_xprt_recieved. This clears
XPT_BUSY and then svc_xprt_enqueue - this last without owning a reference.
This is dangerous and has been seen to leave svc_xprt_enqueue working
with an xprt containing garbage.
So we need to hold an extra counted reference over that call to
svc_xprt_received.
For safety, any time we clear XPT_BUSY and then use the xprt again, we
first get a reference, and the put it again afterwards.
Note that svc_close_all does not need this extra protection as there are
no threads running, and the final free can only be called asynchronously
from such a thread.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8ca4ba7bac89a78cc75de8b47872030bfb9faee6
Author: Sergey Vlasov <vsu@altlinux.ru>
Date: Sun Nov 28 21:04:05 2010 +0000
NFS: Fix fcntl F_GETLK not reporting some conflicts
commit 21ac19d484a8ffb66f64487846c8d53afef04d2b upstream.
The commit 129a84de2347002f09721cda3155ccfd19fade40 (locks: fix F_GETLK
regression (failure to find conflicts)) fixed the posix_test_lock()
function by itself, however, its usage in NFS changed by the commit
9d6a8c5c213e34c475e72b245a8eb709258e968c (locks: give posix_test_lock
same interface as ->lock) remained broken - subsequent NFS-specific
locking code received F_UNLCK instead of the user-specified lock type.
To fix the problem, fl->fl_type needs to be saved before the
posix_test_lock() call and restored if no local conflicts were reported.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=23892
Tested-by: Alexander Morozov <amorozov@etersoft.ru>
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8db3fab78db195b013c42fbaf9267ef0875b1b3f
Author: Neil Brown <neilb@suse.de>
Date: Thu Dec 2 11:14:30 2010 +1100
nfsd: Fix possible BUG_ON firing in set_change_info
commit c1ac3ffcd0bc7e9617f62be8c7043d53ab84deac upstream.
If vfs_getattr in fill_post_wcc returns an error, we don't
set fh_post_change.
For NFSv4, this can result in set_change_info triggering a BUG_ON.
i.e. fh_post_saved being zero isn't really a bug.
So:
- instead of BUGging when fh_post_saved is zero, just clear ->atomic.
- if vfs_getattr fails in fill_post_wcc, take a copy of i_ctime anyway.
This will be used i seg_change_info, but not overly trusted.
- While we are there, remove the pointless 'if' statements in set_change_info.
There is no harm setting all the values.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 253afebc6098cb7461bc1052a9fd9757250b462b
Author: Chuck Lever <chuck.lever@oracle.com>
Date: Fri Dec 10 12:31:14 2010 -0500
NFS: Fix panic after nfs_umount()
commit 5b362ac3799ff4225c40935500f520cad4d7ed66 upstream.
After a few unsuccessful NFS mount attempts in which the client and
server cannot agree on an authentication flavor both support, the
client panics. nfs_umount() is invoked in the kernel in this case.
Turns out nfs_umount()'s UMNT RPC invocation causes the RPC client to
write off the end of the rpc_clnt's iostat array. This is because the
mount client's nrprocs field is initialized with the count of defined
procedures (two: MNT and UMNT), rather than the size of the client's
proc array (four).
The fix is to use the same initialization technique used by most other
upper layer clients in the kernel.
Introduced by commit 0b524123, which failed to update nrprocs when
support was added for UMNT in the kernel.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=24302
BugLink: http://bugs.launchpad.net/bugs/683938
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e972317c844a4b2ec578e70ba3c397f0e242e9f6
Author: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed Dec 1 10:11:09 2010 +0100
nohz: Fix get_next_timer_interrupt() vs cpu hotplug
commit dbd87b5af055a0cc9bba17795c9a2b0d17795389 upstream.
This fixes a bug as seen on 2.6.32 based kernels where timers got
enqueued on offline cpus.
If a cpu goes offline it might still have pending timers. These will
be migrated during CPU_DEAD handling after the cpu is offline.
However while the cpu is going offline it will schedule the idle task
which will then call tick_nohz_stop_sched_tick().
That function in turn will call get_next_timer_intterupt() to figure
out if the tick of the cpu can be stopped or not. If it turns out that
the next tick is just one jiffy off (delta_jiffies == 1)
tick_nohz_stop_sched_tick() incorrectly assumes that the tick should
not stop and takes an early exit and thus it won't update the load
balancer cpu.
Just afterwards the cpu will be killed and the load balancer cpu could
be the offline cpu.
On 2.6.32 based kernel get_nohz_load_balancer() gets called to decide
on which cpu a timer should be enqueued (see __mod_timer()). Which
leads to the possibility that timers get enqueued on an offline cpu.
These will never expire and can cause a system hang.
This has been observed 2.6.32 kernels. On current kernels
__mod_timer() uses get_nohz_timer_target() which doesn't have that
problem. However there might be other problems because of the too
early exit tick_nohz_stop_sched_tick() in case a cpu goes offline.
The easiest and probably safest fix seems to be to let
get_next_timer_interrupt() just lie and let it say there isn't any
pending timer if the current cpu is offline.
I also thought of moving migrate_[hr]timers() from CPU_DEAD to
CPU_DYING, but seeing that there already have been fixes at least in
the hrtimer code in this area I'm afraid that this could add new
subtle bugs.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101201091109.GA8984@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8300619b701e4441950f505c32df651dff26286b
Author: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri Nov 26 13:00:59 2010 +0100
nohz: Fix printk_needs_cpu() return value on offline cpus
commit 61ab25447ad6334a74e32f60efb135a3467223f8 upstream.
This patch fixes a hang observed with 2.6.32 kernels where timers got enqueued
on offline cpus.
printk_needs_cpu() may return 1 if called on offline cpus. When a cpu gets
offlined it schedules the idle process which, before killing its own cpu, will
call tick_nohz_stop_sched_tick(). That function in turn will call
printk_needs_cpu() in order to check if the local tick can be disabled. On
offline cpus this function should naturally return 0 since regardless if the
tick gets disabled or not the cpu will be dead short after. That is besides the
fact that __cpu_disable() should already have made sure that no interrupts on
the offlined cpu will be delivered anyway.
In this case it prevents tick_nohz_stop_sched_tick() to call
select_nohz_load_balancer(). No idea if that really is a problem. However what
made me debug this is that on 2.6.32 the function get_nohz_load_balancer() is
used within __mod_timer() to select a cpu on which a timer gets enqueued. If
printk_needs_cpu() returns 1 then the nohz_load_balancer cpu doesn't get
updated when a cpu gets offlined. It may contain the cpu number of an offline
cpu. In turn timers get enqueued on an offline cpu and not very surprisingly
they never expire and cause system hangs.
This has been observed 2.6.32 kernels. On current kernels __mod_timer() uses
get_nohz_timer_target() which doesn't have that problem. However there might be
other problems because of the too early exit tick_nohz_stop_sched_tick() in
case a cpu goes offline.
Easiest way to fix this is just to test if the current cpu is offline and call
printk_tick() directly which clears the condition.
Alternatively I tried a cpu hotplug notifier which would clear the condition,
however between calling the notifier function and printk_needs_cpu() something
could have called printk() again and the problem is back again. This seems to
be the safest fix.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101126120235.406766476@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bb494f01fec09228682c060841f7f6033b7563f4
Author: Alex Deucher <alexdeucher@gmail.com>
Date: Wed Dec 8 19:09:42 2010 -0500
drm/kms: remove spaces from connector names (v2)
commit e76116ca9671e2e5239054a40303b94feab585ad upstream.
Grub doesn't parse spaces in parameters correctly, so
this makes it impossible to force video= parameters
for kms on the grub kernel command line.
v2: shorten the names to make them easier to type.
Reported-by: Sergej Pupykin <ml@sergej.pp.ru>
Cc: Sergej Pupykin <ml@sergej.pp.ru>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6a6dbd720c976847e4cd553ae8d4520e300e7c65
Author: Daniel T Chen <crimsun@ubuntu.com>
Date: Thu Dec 2 22:45:45 2010 -0500
ALSA: hda: Use model=lg quirk for LG P1 Express to enable playback and capture
commit 77c4d5cdb81d25a45fbdfb84dd3348121219a072 upstream.
BugLink: https://launchpad.net/bugs/595482
The original reporter states that audible playback from the internal
speaker is inaudible despite the hardware being properly detected. To
work around this symptom, he uses the model=lg quirk to properly enable
both playback, capture, and jack sense. Another user corroborates this
workaround on separate hardware. Add this PCI SSID to the quirk table
to enable it for further LG P1 Expresses.
Reported-and-tested-by: Philip Peitsch <philip.peitsch@gmail.com>
Tested-by: nikhov
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 74a6e0fd8fc216cfa5edcde4bd356a8972cbc74c
Author: H. Peter Anvin <hpa@linux.intel.com>
Date: Fri Dec 10 23:57:04 2010 -0500
x86, hotplug: Use mwait to offline a processor, fix the legacy case
upstream ea53069231f9317062910d6e772cca4ce93de8c8
x86, hotplug: Use mwait to offline a processor, fix the legacy case
Here included also some small follow-on patches to the same code:
upstream a68e5c94f7d3dd64fef34dd5d97e365cae4bb42a
x86, hotplug: Move WBINVD back outside the play_dead loop
upstream ce5f68246bf2385d6174856708d0b746dc378f20
x86, hotplug: In the MWAIT case of play_dead, CLFLUSH the cache line
https://bugzilla.kernel.org/show_bug.cgi?id=5471
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ef93fe6db2f59649bd3ee094fcc52eb1cc0648b7
Author: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue Nov 30 16:39:27 2010 +0100
fuse: fix ioctl when server is 32bit
commit d9d318d39dd5cb686660504a3565aac453709ccc upstream.
If a 32bit CUSE server is run on 64bit this results in EIO being
returned to the caller.
The reason is that FUSE_IOCTL_RETRY reply was defined to use 'struct
iovec', which is different on 32bit and 64bit archs.
Work around this by looking at the size of the reply to determine
which struct was used. This is only needed if CONFIG_COMPAT is
defined.
A more permanent fix for the interface will be to use the same struct
on both 32bit and 64bit.
Reported-by: "ccmail111" <ccmail111@yahoo.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 149062eb1b3be1295f11adb5c9d7d200c3996373
Author: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue Nov 30 16:39:27 2010 +0100
fuse: verify ioctl retries
commit 7572777eef78ebdee1ecb7c258c0ef94d35bad16 upstream.
Verify that the total length of the iovec returned in FUSE_IOCTL_RETRY
doesn't overflow iov_length().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5faf7d928cf005ec7e6effa0e006b013f1ec3946
Author: Robin Holt <holt@sgi.com>
Date: Tue Oct 26 14:21:15 2010 -0700
sgi-xp: incoming XPC channel messages can come in after the channel's partition structures have been torn down
commit 09358972bff5ce99de496bbba97c85d417b3c054 upstream.
Under some workloads, some channel messages have been observed being
delayed on the sending side past the point where the receiving side has
been able to tear down its partition structures.
This condition is already detected in xpc_handle_activate_IRQ_uv(), but
that information is not given to xpc_handle_activate_mq_msg_uv(). As a
result, xpc_handle_activate_mq_msg_uv() assumes the structures still exist
and references them, causing a NULL-pointer deref.
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d7a777500e5c2d0478bed0f5d81625ff69deea9e
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed Nov 17 06:37:16 2010 +0000
rds: Integer overflow in RDS cmsg handling
commit 218854af84038d828a32f061858b1902ed2beec6 upstream.
In rds_cmsg_rdma_args(), the user-provided args->nr_local value is
restricted to less than UINT_MAX. This seems to need a tighter upper
bound, since the calculation of total iov_size can overflow, resulting
in a small sock_kmalloc() allocation. This would probably just result
in walking off the heap and crashing when calling rds_rdma_pages() with
a high count value. If it somehow doesn't crash here, then memory
corruption could occur soon after.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3f33eee5d6d77e4185d8e9a7a082da1a7c200064
Author: Phil Blundell <philb@gnu.org>
Date: Wed Nov 24 11:51:47 2010 -0800
econet: fix CVE-2010-3848
commit a27e13d370415add3487949c60810e36069a23a6 upstream.
Don't declare variable sized array of iovecs on the stack since this
could cause stack overflow if msg->msgiovlen is large. Instead, coalesce
the user-supplied data into a new buffer and use a single iovec for it.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e2ebf28f8733a1cc3539a02e6c07e08e9eff9962
Author: Phil Blundell <philb@gnu.org>
Date: Wed Nov 24 11:49:53 2010 -0800
econet: fix CVE-2010-3850
commit 16c41745c7b92a243d0874f534c1655196c64b74 upstream.
Add missing check for capable(CAP_NET_ADMIN) in SIOCSIFADDR operation.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8db8568ebd04b53744abdb0ecdbac41a4f866523
Author: Phil Blundell <philb@gnu.org>
Date: Wed Nov 24 11:49:19 2010 -0800
econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849
commit fa0e846494792e722d817b9d3d625a4ef4896c96 upstream.
Later parts of econet_sendmsg() rely on saddr != NULL, so return early
with EINVAL if NULL was passed otherwise an oops may occur.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3302c32ab0e6bdcc9f9b4acac8c4c3c0a2fc3f02
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu Nov 4 14:38:39 2010 -0400
crypto: padlock - Fix AES-CBC handling on odd-block-sized input
commit c054a076a1bd4731820a9c4d638b13d5c9bf5935 upstream.
On certain VIA chipsets AES-CBC requires the input/output to be
a multiple of 64 bytes. We had a workaround for this but it was
buggy as it sent the whole input for processing when it is meant
to only send the initial number of blocks which makes the rest
a multiple of 64 bytes.
As expected this causes memory corruption whenever the workaround
kicks in.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9cff69da3eb80877cf7efd51c777707e7561537f
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Fri Nov 12 12:44:42 2010 -0800
x25: Prevent crashing when parsing bad X.25 facilities
commit 5ef41308f94dcbb3b7afc56cdef1c2ba53fa5d2f upstream.
Now with improved comma support.
On parsing malformed X.25 facilities, decrementing the remaining length
may cause it to underflow. Since the length is an unsigned integer,
this will result in the loop continuing until the kernel crashes.
This patch adds checks to ensure decrementing the remaining length does
not cause it to wrap around.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b534a83f55a6c4ca6ad9e54148df9b94e1c46010
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed Sep 15 18:44:22 2010 -0300
V4L/DVB: ivtvfb: prevent reading uninitialized stack memory
commit 405707985594169cfd0b1d97d29fcb4b4c6f2ac9 upstream.
The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16
bytes of uninitialized stack memory, because the "reserved" member of
the fb_vblank struct declared on the stack is not altered or zeroed
before being copied back to the user. This patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e3485e7d76a3c1b0cab50c8a804bccc577842598
Author: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Wed Nov 10 12:10:30 2010 +0000
can-bcm: fix minor heap overflow
commit 0597d1b99fcfc2c0eada09a698f85ed413d4ba84 upstream.
On 64-bit platforms the ASCII representation of a pointer may be up to 17
bytes long. This patch increases the length of the buffer accordingly.
http://marc.info/?l=linux-netdev&m=128872251418192&w=2
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9b981c1f3110980ab5e0b7adb3359934621b4da7
Author: andrew hendry <andrew.hendry@gmail.com>
Date: Wed Nov 3 12:54:53 2010 +0000
memory corruption in X.25 facilities parsing
commit a6331d6f9a4298173b413cf99a40cc86a9d92c37 upstream.
Signed-of-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 274430196e3c31e3f8a3671ac06c7cf486f8666b
Author: John Hughes <john@calva.com>
Date: Wed Apr 7 21:29:25 2010 -0700
x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet.
commit f5eb917b861828da18dc28854308068c66d1449a upstream.
Here is a patch to stop X.25 examining fields beyond the end of the packet.
For example, when a simple CALL ACCEPTED was received:
10 10 0f
x25_parse_facilities was attempting to decode the FACILITIES field, but this
packet contains no facilities field.
Signed-off-by: John Hughes <john@calva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d9de63daf855ea965bd7e8af55f22c40551835d5
Author: David S. Miller <davem@davemloft.net>
Date: Thu Oct 28 11:41:55 2010 -0700
net: Limit socket I/O iovec total length to INT_MAX.
commit 8acfe468b0384e834a303f08ebc4953d72fb690a upstream.
This helps protect us from overflow issues down in the
individual protocol sendmsg/recvmsg handlers. Once
we hit INT_MAX we truncate out the rest of the iovec
by setting the iov_len members to zero.
This works because:
1) For SOCK_STREAM and SOCK_SEQPACKET sockets, partial
writes are allowed and the application will just continue
with another write to send the rest of the data.
2) For datagram oriented sockets, where there must be a
one-to-one correspondance between write() calls and
packets on the wire, INT_MAX is going to be far larger
than the packet size limit the protocol is going to
check for and signal with -EMSGSIZE.
Based upon a patch by Linus Torvalds.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 47f407ec1fa2d0b5a785ecb19dc124bdba40ca20
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat Oct 30 16:43:10 2010 -0700
net: Truncate recvfrom and sendto length to INT_MAX.
commit 253eacc070b114c2ec1f81b067d2fed7305467b0 upstream.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4f098248b8f55a27598eccac90d39b94e2dc78cd
Author: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Date: Tue Nov 30 17:36:08 2010 +0900
genirq: Fix incorrect proc spurious output
commit 25c9170ed64a6551beefe9315882f754e14486f4 upstream.
Since commit a1afb637(switch /proc/irq/*/spurious to seq_file) all
/proc/irq/XX/spurious files show the information of irq 0.
Current irq_spurious_proc_open() passes on NULL as the 3rd argument,
which is used as an IRQ number in irq_spurious_proc_show(), to the
single_open(). Because of this, all the /proc/irq/XX/spurious file
shows IRQ 0 information regardless of the IRQ number.
To fix the problem, irq_spurious_proc_open() must pass on the
appropreate data (IRQ number) to single_open().
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
LKML-Reference: <4CF4B778.90604@jp.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8d342ebf1fddfa25fa6b5e1c6c28546addf53248
Author: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed Dec 1 10:08:01 2010 +0100
nohz/s390: fix arch_needs_cpu() return value on offline cpus
commit 398812159e328478ae49b4bd01f0d71efea96c39 upstream.
This fixes the same problem as described in the patch "nohz: fix
printk_needs_cpu() return value on offline cpus" for the arch_needs_cpu()
primitive:
arch_needs_cpu() may return 1 if called on offline cpus. When a cpu gets
offlined it schedules the idle process which, before killing its own cpu,
will call tick_nohz_stop_sched_tick().
That function in turn will call arch_needs_cpu() in order to check if the
local tick can be disabled. On offline cpus this function should naturally
return 0 since regardless if the tick gets disabled or not the cpu will be
dead short after. That is besides the fact that __cpu_disable() should already
have made sure that no interrupts on the offlined cpu will be delivered anyway.
In this case it prevents tick_nohz_stop_sched_tick() to call
select_nohz_load_balancer(). No idea if that really is a problem. However what
made me debug this is that on 2.6.32 the function get_nohz_load_balancer() is
used within __mod_timer() to select a cpu on which a timer gets enqueued.
If arch_needs_cpu() returns 1 then the nohz_load_balancer cpu doesn't get
updated when a cpu gets offlined. It may contain the cpu number of an offline
cpu. In turn timers get enqueued on an offline cpu and not very surprisingly
they never expire and cause system hangs.
This has been observed 2.6.32 kernels. On current kernels __mod_timer() uses
get_nohz_timer_target() which doesn't have that problem. However there might
be other problems because of the too early exit tick_nohz_stop_sched_tick()
in case a cpu goes offline.
This specific bug was indrocuded with 3c5d92a0 "nohz: Introduce
arch_needs_cpu".
In this case a cpu hotplug notifier is used to fix the issue in order to keep
the normal/fast path small. All we need to do is to clear the condition that
makes arch_needs_cpu() return 1 since it is just a performance improvement
which is supposed to keep the local tick running for a short period if a cpu
goes idle. Nothing special needs to be done except for clearing the condition.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 971a8db01d3de4f15e6aff74012b2e68387700e3
Author: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Date: Sun Nov 28 19:46:50 2010 -0200
wmi: use memcmp instead of strncmp to compare GUIDs
commit 8b14d7b22c61f17ccb869e0047d9df6dd9f50a9f upstream.
While looking for the duplicates in /sys/class/wmi/, I couldn't find
them. The code that looks for duplicates uses strncmp in a binary GUID,
which may contain zero bytes. The right function is memcmp, which is
also used in another section of wmi code.
It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of
39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth
printed, they were found as equal by strncmp.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c72eb4d4a0239d8940b027bbe0ce3cd9a66d4635
Author: Wu Fengguang <fengguang.wu@intel.com>
Date: Mon Aug 9 17:20:01 2010 -0700
vmscan: raise the bar to PAGEOUT_IO_SYNC stalls
commit e31f3698cd3499e676f6b0ea12e3528f569c4fa3 upstream.
Fix "system goes unresponsive under memory pressure and lots of
dirty/writeback pages" bug.
http://lkml.org/lkml/2010/4/4/86
In the above thread, Andreas Mohr described that
Invoking any command locked up for minutes (note that I'm
talking about attempted additional I/O to the _other_,
_unaffected_ main system HDD - such as loading some shell
binaries -, NOT the external SSD18M!!).
This happens when the two conditions are both meet:
- under memory pressure
- writing heavily to a slow device
OOM also happens in Andreas' system. The OOM trace shows that 3 processes
are stuck in wait_on_page_writeback() in the direct reclaim path. One in
do_fork() and the other two in unix_stream_sendmsg(). They are blocked on
this condition:
(sc->order && priority < DEF_PRIORITY - 2)
which was introduced in commit 78dc583d (vmscan: low order lumpy reclaim
also should use PAGEOUT_IO_SYNC) one year ago. That condition may be too
permissive. In Andreas' case, 512MB/1024 = 512KB. If the direct reclaim
for the order-1 fork() allocation runs into a range of 512KB
hard-to-reclaim LRU pages, it will be stalled.
It's a severe problem in three ways.
Firstly, it can easily happen in daily desktop usage. vmscan priority can
easily go below (DEF_PRIORITY - 2) on _local_ memory pressure. Even if
the system has 50% globally reclaimable pages, it still has good
opportunity to have 0.1% sized hard-to-reclaim ranges. For example, a
simple dd can easily create a big range (up to 20%) of dirty pages in the
LRU lists. And order-1 to order-3 allocations are more than common with
SLUB. Try "grep -v '1 :' /proc/slabinfo" to get the list of high order
slab caches. For example, the order-1 radix_tree_node slab cache may
stall applications at swap-in time; the order-3 inode cache on most
filesystems may stall applications when trying to read some file; the
order-2 proc_inode_cache may stall applications when trying to open a
/proc file.
Secondly, once triggered, it will stall unrelated processes (not doing IO
at all) in the system. This "one slow USB device stalls the whole system"
avalanching effect is very bad.
Thirdly, once stalled, the stall time could be intolerable long for the
users. When there are 20MB queued writeback pages and USB 1.1 is writing
them in 1MB/s, wait_on_page_writeback() will stuck for up to 20 seconds.
Not to mention it may be called multiple times.
So raise the bar to only enable PAGEOUT_IO_SYNC when priority goes below
DEF_PRIORITY/3, or 6.25% LRU size. As the default dirty throttle ratio is
20%, it will hardly be triggered by pure dirty pages. We'd better treat
PAGEOUT_IO_SYNC as some last resort workaround -- its stall time is so
uncomfortably long (easily goes beyond 1s).
The bar is only raised for (order < PAGE_ALLOC_COSTLY_ORDER) allocations,
which are easy to satisfy in 1TB memory boxes. So, although 6.25% of
memory could be an awful lot of pages to scan on a system with 1TB of
memory, it won't really have to busy scan that much.
Andreas tested an older version of this patch and reported that it mostly
fixed his problem. Mel Gorman helped improve it and KOSAKI Motohiro will
fix it further in the next patch.
Reported-by: Andreas Mohr <andi@lisas.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit cc99a496b570408113139fcddcf1a30223357293
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue Mar 2 08:36:46 2010 -0800
Prioritize synchronous signals over 'normal' signals
commit a27341cd5fcb7cf2d2d4726e9f324009f7162c00 upstream.
This makes sure that we pick the synchronous signals caused by a
processor fault over any pending regular asynchronous signals sent to
use by [t]kill().
This is not strictly required semantics, but it makes it _much_ easier
for programs like Wine that expect to find the fault information in the
signal stack.
Without this, if a non-synchronous signal gets picked first, the delayed
asynchronous signal will have its signal context pointing to the new
signal invocation, rather than the instruction that caused the SIGSEGV
or SIGBUS in the first place.
This is not all that pretty, and we're discussing making the synchronous
signals more explicit rather than have these kinds of implicit
preferences of SIGSEGV and friends. See for example
http://bugzilla.kernel.org/show_bug.cgi?id=15395
for some of the discussion. But in the meantime this is a simple and
fairly straightforward work-around, and the whole
if (x & Y)
x &= Y;
thing can be compiled into (and gcc does do it) just three instructions:
movq %rdx, %rax
andl $Y, %eax
cmovne %rax, %rdx
so it is at least a simple solution to a subtle issue.
Reported-and-tested-by: Pavel Vilim <wylda@volny.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 171d73b2f89f57d6696d0aaf42fd5ff8ae19801f
Author: Josef Bacik <josef@redhat.com>
Date: Thu Feb 25 20:38:35 2010 +0000
Btrfs: kfree correct pointer during mount option parsing
commit da495ecc0fb096b383754952a1c152147bc95b52 upstream.
We kstrdup the options string, but then strsep screws with the pointer,
so when we kfree() it, we're not giving it the right pointer.
Tested-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3eb88cf70fd483e2333b1954e35b355deb5e1f06
Author: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Mon Aug 9 17:20:09 2010 -0700
mm: fix corruption of hibernation caused by reusing swap during image saving
commit 966cca029f739716fbcc8068b8c6dfe381f86fc3 upstream.
Since 2.6.31, swap_map[]'s refcounting was changed to show that a used
swap entry is just for swap-cache, can be reused. Then, while scanning
free entry in swap_map[], a swap entry may be able to be reclaimed and
reused. It was caused by commit c9e444103b5e7a5 ("mm: reuse unused swap
entry if necessary").
But this caused deta corruption at resume. The scenario is
- Assume a clean-swap cache, but mapped.
- at hibernation_snapshot[], clean-swap-cache is saved as
clean-swap-cache and swap_map[] is marked as SWAP_HAS_CACHE.
- then, save_image() is called. And reuse SWAP_HAS_CACHE entry to save
image, and break the contents.
After resume:
- the memory reclaim runs and finds clean-not-referenced-swap-cache and
discards it because it's marked as clean. But here, the contents on
disk and swap-cache is inconsistent.
Hance memory is corrupted.
This patch avoids the bug by not reclaiming swap-entry during hibernation.
This is a quick fix for backporting.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Ondreg Zary <linux@rainbow-software.org>
Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b87c9ea0ff8b0f8e7ff538e1d47a20933b229403
Author: Nikanth Karthikesan <knikanth@suse.de>
Date: Sun May 16 14:00:00 2010 -0400
ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate
commit 6d19c42b7cf81c39632b6d4dbc514e8449bcd346 upstream.
Currently using posix_fallocate one can bypass an RLIMIT_FSIZE limit
and create a file larger than the limit. Add a check for that.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Amit Arora <aarora@in.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 110e9fc4b1c8096f7805c6c3e9e20b55a4aaffc7
Author: H. Peter Anvin <hpa@linux.intel.com>
Date: Tue Sep 7 16:16:18 2010 -0700
compat: Make compat_alloc_user_space() incorporate the access_ok()
commit c41d68a513c71e35a14f66d71782d27a79a81ea6 upstream.
compat_alloc_user_space() expects the caller to independently call
access_ok() to verify the returned area. A missing call could
introduce problems on some architectures.
This patch incorporates the access_ok() check into
compat_alloc_user_space() and also adds a sanity check on the length.
The existing compat_alloc_user_space() implementations are renamed
arch_compat_alloc_user_space() and are used as part of the
implementation of the new global function.
This patch assumes NULL will cause __get_user()/__put_user() to either
fail or access userspace on all architectures. This should be
followed by checking the return value of compat_access_user_space()
for NULL in the callers, at which time the access_ok() in the callers
can also be removed.
Reported-by: Ben Hawkes <hawkes@sota.gen.nz>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <jejb@parisc-linux.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b5bf2cfbfbecb8b4d0369c637569283d05d85cf5
Author: Roland McGrath <roland@redhat.com>
Date: Tue Sep 14 12:22:58 2010 -0700
x86-64, compat: Retruncate rax after ia32 syscall entry tracing
commit eefdca043e8391dcd719711716492063030b55ac upstream.
In commit d4d6715, we reopened an old hole for a 64-bit ptracer touching a
32-bit tracee in system call entry. A %rax value set via ptrace at the
entry tracing stop gets used whole as a 32-bit syscall number, while we
only check the low 32 bits for validity.
Fix it by truncating %rax back to 32 bits after syscall_trace_enter,
in addition to testing the full 64 bits as has already been added.
Reported-by: Ben Hawkes <hawkes@sota.gen.nz>
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 86869f15548105de95cfbf51b240b37a8e1bf35d
Author: H. Peter Anvin <hpa@linux.intel.com>
Date: Tue Sep 14 12:42:41 2010 -0700
x86-64, compat: Test %rax for the syscall number, not %eax
commit 36d001c70d8a0144ac1d038f6876c484849a74de upstream.
On 64 bits, we always, by necessity, jump through the system call
table via %rax. For 32-bit system calls, in theory the system call
number is stored in %eax, and the code was testing %eax for a valid
system call number. At one point we loaded the stored value back from
the stack to enforce zero-extension, but that was removed in checkin
d4d67150165df8bf1cc05e532f6efca96f907cab. An actual 32-bit process
will not be able to introduce a non-zero-extended number, but it can
happen via ptrace.
Instead of re-introducing the zero-extension, test what we are
actually going to use, i.e. %rax. This only adds a handful of REX
prefixes to the code.
Reported-by: Ben Hawkes <hawkes@sota.gen.nz>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d4c7414aa43c3c71245d33bb976c92af727240f4
Author: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed Mar 3 23:55:01 2010 -0500
ext4: consolidate in_range() definitions
commit 731eb1a03a8445cde2cb23ecfb3580c6fa7bb690 upstream.
There are duplicate macro definitions of in_range() in mballoc.h and
balloc.c. This consolidates these two definitions into ext4.h, and
changes extents.c to use in_range() as well.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 83647d51540c560bd6da6b2b14452a2c231b4ff7
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun Aug 15 11:35:52 2010 -0700
mm: fix up some user-visible effects of the stack guard page
commit d7824370e26325c881b665350ce64fb0a4fde24a upstream.
This commit makes the stack guard page somewhat less visible to user
space. It does this by:
- not showing the guard page in /proc/<pid>/maps
It looks like lvm-tools will actually read /proc/self/maps to figure
out where all its mappings are, and effectively do a specialized
"mlockall()" in user space. By not showing the guard page as part of
the mapping (by just adding PAGE_SIZE to the start for grows-up
pages), lvm-tools ends up not being aware of it.
- by also teaching the _real_ mlock() functionality not to try to lock
the guard page.
That would just expand the mapping down to create a new guard page,
so there really is no point in trying to lock it in place.
It would perhaps be nice to show the guard page specially in
/proc/<pid>/maps (or at least mark grow-down segments some way), but
let's not open ourselves up to more breakage by user space from programs
that depends on the exact deails of the 'maps' file.
Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools
source code to see what was going on with the whole new warning.
Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be
Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8310ff66adec21334f83d7169f9453cae796e401
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat Aug 14 11:44:56 2010 -0700
mm: fix page table unmap for stack guard page properly
commit 11ac552477e32835cb6970bf0a70c210807f5673 upstream.
We do in fact need to unmap the page table _before_ doing the whole
stack guard page logic, because if it is needed (mainly 32-bit x86 with
PAE and CONFIG_HIGHPTE, but other architectures may use it too) then it
will do a kmap_atomic/kunmap_atomic.
And those kmaps will create an atomic region that we cannot do
allocations in. However, the whole stack expand code will need to do
anon_vma_prepare() and vma_lock_anon_vma() and they cannot do that in an
atomic region.
Now, a better model might actually be to do the anon_vma_prepare() when
_creating_ a VM_GROWSDOWN segment, and not have to worry about any of
this at page fault time. But in the meantime, this is the
straightforward fix for the issue.
See https://bugzilla.kernel.org/show_bug.cgi?id=16588 for details.
Reported-by: Wylda <wylda@volny.cz>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Mike Pagano <mpagano@gentoo.org>
Reported-by: François Valenduc <francois.valenduc@tvcablenet.be>
Tested-by: Ed Tomlinson <edt@aei.ca>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c8fe7a0e856eda82e595618a6ebe020a82df0adc
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri Aug 13 09:24:04 2010 -0700
mm: fix missing page table unmap for stack guard page failure case
commit 5528f9132cf65d4d892bcbc5684c61e7822b21e9 upstream.
.. which didn't show up in my tests because it's a no-op on x86-64 and
most other architectures. But we enter the function with the last-level
page table mapped, and should unmap it at exit.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 96a82b14baf22492429323e4ce3ea739ec52b1ca
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu Aug 12 17:54:33 2010 -0700
mm: keep a guard page below a grow-down stack segment
commit 320b2b8de12698082609ebbc1a17165727f4c893 upstream.
This is a rather minimally invasive patch to solve the problem of the
user stack growing into a memory mapped area below it. Whenever we fill
the first page of the stack segment, expand the segment down by one
page.
Now, admittedly some odd application might _want_ the stack to grow down
into the preceding memory mapping, and so we may at some point need to
make this a process tunable (some people might also want to have more
than a single page of guarding), but let's try the minimal approach
first.
Tested with trivial application that maps a single page just below the
stack, and then starts recursing. Without this, we will get a SIGSEGV
_after_ the stack has smashed the mapping. With this patch, we'll get a
nice SIGBUS just as the stack touches the page just above the mapping.
Requested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 86e2f6345053ce66ab9a4b735f3029d445eaed70
Author: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat Nov 13 13:01:56 2010 -0600
staging: rtl8187se: Change panic to warn when RF switch turned off
commit f36d83a8cb7224f45fdfa1129a616dff56479a09 upstream.
This driver issues a kernel panic over conditions that do not
justify such drastic action. Change these to log entries with
a stack dump.
This patch fixes the system crash reported in
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/674285.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-Tested-by: Robie Basik <rb-oss-3@justgohome.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0c8089f2405e9b6876d4a767cecc9d804d9bb843
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue Nov 16 11:18:33 2010 -0800
Staging: frontier: fix up some sysfs attribute permissions
commit 3bad28ec006ad6ab2bca4e5103860b75391e3c9d and
2a767fda5d0d8dcff465724dfad6ee131489b3f2 upstream merged together.
They should not be writable by any user
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Taht <d@teklibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6acee6aa3ecac4d1beb3ff3b63c77e42be236508
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu Nov 18 11:21:04 2010 -0800
Staging: samsung-laptop: fix up my fixup for some sysfs attribute permissions
commit 4d7bc388b44e42a1feafa35e50eef4f24d6ca59d upstream.
They should be writable by root, not readable.
Doh, stupid me with the wrong flags.
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2ce8da7202e4f2e8c26626a7a18dc4ffda8ab189
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue Nov 16 11:21:03 2010 -0800
Staging: samsung-laptop: fix up some sysfs attribute permissions
commit 90c05b97fdec8d2196e420d98f774bab731af7aa upstream.
They should not be writable by any user
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d9362bc3dd2f35992c07b7088a32f51d65fc6c01
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed Sep 8 05:08:44 2010 +0000
udp: add rehash on connect()
commit 719f835853a92f6090258114a72ffe41f09155cd upstream.
commit 30fff923 introduced in linux-2.6.33 (udp: bind() optimisation)
added a secondary hash on UDP, hashed on (local addr, local port).
Problem is that following sequence :
fd = socket(...)
connect(fd, &remote, ...)
not only selects remote end point (address and port), but also sets
local address, while UDP stack stored in secondary hash table the socket
while its local address was INADDR_ANY (or ipv6 equivalent)
Sequence is :
- autobind() : choose a random local port, insert socket in hash tables
[while local address is INADDR_ANY]
- connect() : set remote address and port, change local address to IP
given by a route lookup.
When an incoming UDP frame comes, if more than 10 sockets are found in
primary hash table, we switch to secondary table, and fail to find
socket because its local address changed.
One solution to this problem is to rehash datagram socket if needed.
We add a new rehash(struct socket *) method in "struct proto", and
implement this method for UDP v4 & v6, using a common helper.
This rehashing only takes care of secondary hash table, since primary
hash (based on local port only) is not changed.
Reported-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 179b606f56b25889f66845da8aa965c9bd495dde
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Wed Nov 24 12:56:52 2010 -0800
leds: fix bug with reading NAS SS4200 dmi code
commit 50d431e8a15701b599c98afe2b464eb33c952477 upstream.
While running randconfg with ktest.pl I stumbled upon this bug:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
IP: [<ffffffff815fe44f>] strstr+0x39/0x86
PGD 0
Oops: 0000 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.37-rc1-test+ #6 DG965MQ/
RIP: 0010:[<ffffffff815fe44f>] [<ffffffff815fe44f>] strstr+0x39/0x86
RSP: 0018:ffff8800797cbd80 EFLAGS: 00010213
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffffffffffff
RDX: 0000000000000000 RSI: ffffffff82eb7ac9 RDI: 0000000000000003
RBP: ffff8800797cbda0 R08: ffff880000000003 R09: 0000000000030725
R10: ffff88007d294c00 R11: 0000000000014c00 R12: 0000000000000020
R13: ffffffff82eb7ac9 R14: ffffffffffffffff R15: ffffffff82eb7b08
FS: 0000000000000000(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000003 CR3: 0000000002a1d000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff8800797ca000, task ffff8800797d0000)
Stack:
00000000000000ba ffffffff82eb7ac9 ffffffff82eb7ab8 00000000000000ba
ffff8800797cbdf0 ffffffff81e2050f ffff8800797cbdc0 00000000815f913b
ffff8800797cbe00 ffffffff82eb7ab8 0000000000000000 0000000000000000
Call Trace:
[<ffffffff81e2050f>] dmi_matches+0x117/0x154
[<ffffffff81e205d7>] dmi_check_system+0x3d/0x8d
[<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
[<ffffffff82e1ad49>] nas_gpio_init+0x24/0x2c8
[<ffffffff820d750d>] ? wm8350_led_init+0x0/0x20
[<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
[<ffffffff810022f7>] do_one_initcall+0xab/0x1b2
[<ffffffff82da749c>] kernel_init+0x248/0x331
[<ffffffff8100e624>] kernel_thread_helper+0x4/0x10
[<ffffffff82da7254>] ? kernel_init+0x0/0x331
Found that the nas_led_whitelist dmi_system_id structure array had no
NULL end delimiter, causing the dmi_check_system() loop to read an
undefined entry.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Dave Hansen <dave@sr71.net>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f20378d48a50593755e94f157f55d058f2f92202
Author: James Jones <jajones@nvidia.com>
Date: Wed Nov 24 00:21:37 2010 +0100
ARM: 6482/2: Fix find_next_zero_bit and related assembly
commit 0e91ec0c06d2cd15071a6021c94840a50e6671aa upstream.
The find_next_bit, find_first_bit, find_next_zero_bit
and find_first_zero_bit functions were not properly
clamping to the maxbit argument at the bit level. They
were instead only checking maxbit at the byte level.
To fix this, add a compare and a conditional move
instruction to the end of the common bit-within-the-
byte code used by all the functions and be sure not to
clobber the maxbit argument before it is used.
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bcaefff16de46a7ca217e71f95de384786ebb4d5
Author: Will Deacon <will.deacon@arm.com>
Date: Fri Nov 19 13:18:31 2010 +0100
ARM: 6489/1: thumb2: fix incorrect optimisation in usracc
commit 1142b71d85894dcff1466dd6c871ea3c89e0352c upstream.
Commit 8b592783 added a Thumb-2 variant of usracc which, when it is
called with \rept=2, calls usraccoff once with an offset of 0 and
secondly with a hard-coded offset of 4 in order to avoid incrementing
the pointer again. If \inc != 4 then we will store the data to the wrong
offset from \ptr. Luckily, the only caller that passes \rept=2 to this
function is __clear_user so we haven't been actively corrupting user data.
This patch fixes usracc to pass \inc instead of #4 to usraccoff
when it is called a second time.
Reported-by: Tony Thompson <tony.thompson@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3a27414883e624fdfc62b747a19f106448fb62ca
Author: Pekka Enberg <penberg@kernel.org>
Date: Mon Nov 8 21:29:07 2010 +0200
perf_events: Fix perf_counter_mmap() hook in mprotect()
commit 63bfd7384b119409685a17d5c58f0b56e5dc03da upstream.
As pointed out by Linus, commit dab5855 ("perf_counter: Add mmap event hooks to
mprotect()") is fundamentally wrong as mprotect_fixup() can free 'vma' due to
merging. Fix the problem by moving perf_event_mmap() hook to
mprotect_fixup().
Note: there's another successful return path from mprotect_fixup() if old
flags equal to new flags. We don't, however, need to call
perf_event_mmap() there because 'perf' already knows the VMA is
executable.
Reported-by: Dave Jones <davej@redhat.com>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 61280b33e84e7d940b1dd978e6e401eca98fc64f
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Tue Nov 23 11:02:13 2010 +0000
DECnet: don't leak uninitialized stack byte
commit 3c6f27bf33052ea6ba9d82369fb460726fb779c0 upstream.
A single uninitialized padding byte is leaked to userspace.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 528b8cc1bea342b6cf56b20449ebc89eae3e107b
Author: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu Nov 11 21:18:43 2010 +0100
x86: Ignore trap bits on single step exceptions
commit 6c0aca288e726405b01dacb12cac556454d34b2a upstream.
When a single step exception fires, the trap bits, used to
signal hardware breakpoints, are in a random state.
These trap bits might be set if another exception will follow,
like a breakpoint in the next instruction, or a watchpoint in the
previous one. Or there can be any junk there.
So if we handle these trap bits during the single step exception,
we are going to handle an exception twice, or we are going to
handle junk.
Just ignore them in this case.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=21332
Reported-by: Michael Stefaniuc <mstefani@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Alexandre Julliard <julliard@winehq.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5b10d682e08cb68b9d4581057f4719fe53da6245
Author: Steven J. Magnani <steve@digidescorp.com>
Date: Wed Nov 24 12:56:54 2010 -0800
nommu: yield CPU while disposing VM
commit 04c3496152394d17e3bc2316f9731ee3e8a026bc upstream.
Depending on processor speed, page size, and the amount of memory a
process is allowed to amass, cleanup of a large VM may freeze the system
for many seconds. This can result in a watchdog timeout.
Make sure other tasks receive some service when cleaning up large VMs.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5c1cd3ddd72f5ccd5f40e9e176a9cd69b8fd9506
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Wed Nov 24 12:57:14 2010 -0800
backlight: grab ops_lock before testing bd->ops
commit d1d73578e053b981c3611e5a211534290d24a5eb upstream.
According to the comment describing ops_lock in the definition of struct
backlight_device and when comparing with other functions in backlight.c
the mutex must be hold when checking ops to be non-NULL.
Fixes a problem added by c835ee7f4154992e6 ("backlight: Add suspend/resume
support to the backlight core") in Jan 2009.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 787ee53f0f1c0d9ac1a2023bd813e1c796d1e200
Author: Nelson Elhage <nelhage@ksplice.com>
Date: Thu Dec 2 14:31:21 2010 -0800
do_exit(): make sure that we run with get_fs() == USER_DS
commit 33dd94ae1ccbfb7bf0fb6c692bc3d1c4269e6177 upstream.
If a user manages to trigger an oops with fs set to KERNEL_DS, fs is not
otherwise reset before do_exit(). do_exit may later (via mm_release in
fork.c) do a put_user to a user-controlled address, potentially allowing
a user to leverage an oops into a controlled write into kernel memory.
This is only triggerable in the presence of another bug, but this
potentially turns a lot of DoS bugs into privilege escalations, so it's
worth fixing. I have proof-of-concept code which uses this bug along
with CVE-2010-3849 to write a zero to an arbitrary kernel address, so
I've tested that this is not theoretical.
A more logical place to put this fix might be when we know an oops has
occurred, before we call do_exit(), but that would involve changing
every architecture, in multiple places.
Let's just stick it in do_exit instead.
[akpm@linux-foundation.org: update code comment]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a60d4074da9aa368a668d53c17fb1033a8a256fe
Author: Ken Sumrall <ksumrall@android.com>
Date: Wed Nov 24 12:57:00 2010 -0800
fuse: fix attributes after open(O_TRUNC)
commit a0822c55779d9319939eac69f00bb729ea9d23da upstream.
The attribute cache for a file was not being cleared when a file is opened
with O_TRUNC.
If the filesystem's open operation truncates the file ("atomic_o_trunc"
feature flag is set) then the kernel should invalidate the cached st_mtime
and st_ctime attributes.
Also i_size should be explicitly be set to zero as it is used sometimes
without refreshing the cache.
Signed-off-by: Ken Sumrall <ksumrall@android.com>
Cc: Anfei <anfei.zhou@gmail.com>
Cc: "Anand V. Avati" <avati@gluster.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit eef5b035840ebdcdaa6ed18591c8e9e9cebb668c
Author: Zhang Rui <rui.zhang@intel.com>
Date: Tue Oct 12 09:09:37 2010 +0800
acpi-cpufreq: fix a memleak when unloading driver
commit dab5fff14df2cd16eb1ad4c02e83915e1063fece upstream.
We didn't free per_cpu(acfreq_data, cpu)->freq_table
when acpi_freq driver is unloaded.
Resulting in the following messages in /sys/kernel/debug/kmemleak:
unreferenced object 0xf6450e80 (size 64):
comm "modprobe", pid 1066, jiffies 4294677317 (age 19290.453s)
hex dump (first 32 bytes):
00 00 00 00 e8 a2 24 00 01 00 00 00 00 9f 24 00 ......$.......$.
02 00 00 00 00 6a 18 00 03 00 00 00 00 35 0c 00 .....j.......5..
backtrace:
[<c123ba97>] kmemleak_alloc+0x27/0x50
[<c109f96f>] __kmalloc+0xcf/0x110
[<f9da97ee>] acpi_cpufreq_cpu_init+0x1ee/0x4e4 [acpi_cpufreq]
[<c11cd8d2>] cpufreq_add_dev+0x142/0x3a0
[<c11920b7>] sysdev_driver_register+0x97/0x110
[<c11cce56>] cpufreq_register_driver+0x86/0x140
[<f9dad080>] 0xf9dad080
[<c1001130>] do_one_initcall+0x30/0x160
[<c10626e9>] sys_init_module+0x99/0x1e0
[<c1002d97>] sysenter_do_call+0x12/0x26
[<ffffffff>] 0xffffffff
https://bugzilla.kernel.org/show_bug.cgi?id=15807#c21
Tested-by: Toralf Forster <toralf.foerster@gmx.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a7cfab492b5912fe64e170693f402ad35cc06ed2
Author: Jacques Viviers <jacques.viviers@gmail.com>
Date: Wed Nov 24 11:56:38 2010 +0200
USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added
commit 6fdbad8021151a9e93af8159a6232c8f26415c09 upstream.
Add the PID for the Vardaan Enterprises VEUSB422R3 USB to RS422/485
converter. It uses the same chip as the FTDI_8U232AM_PID 0x6001.
This should also work with the stable branches for:
2.6.31, 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36
Signed-off-by: Jacques Viviers <jacques.viviers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 319170a8f2e3b23729456e226227053031c65fd7
Author: Michael Stuermer <ms@mallorn.de>
Date: Thu Nov 18 00:45:43 2010 +0100
USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable
commit 28942bb6a9dd4e2ed793675e515cfb8297ed355b upstream.
Another variant of the RT Systems programming cable for ham radios.
Signed-off-by: Michael Stuermer <ms@mallorn.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit aa8bdc8721d399c32f26a597578c5bb777123511
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon Nov 15 11:36:44 2010 -0800
USB: misc: usbsevseg: fix up some sysfs attribute permissions
commit e24d7ace4e822debcb78386bf279c9aba4d7fbd1 upstream.
They should not be writable by any user.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Harrison Metzger <harrisonmetz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f1f0a2db03038ad5eeae8e47b3aea030ac62ce17
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon Nov 15 11:34:26 2010 -0800
USB: misc: trancevibrator: fix up a sysfs attribute permission
commit d489a4b3926bad571d404ca6508f6744b9602776 upstream.
It should not be writable by any user.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sam Hocevar <sam@zoy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3b63c721e4bb4d869cb623e8f24e053ecf05418e
Author: Johan Hovold <jhovold@gmail.com>
Date: Sun Sep 12 16:31:45 2010 +0200
USB: ftdi_sio: revert "USB: ftdi_sio: fix DTR/RTS line modes"
commit 677aeafe19e88c282af74564048243ccabb1c590 upstream.
This reverts commit 6a1a82df91fa0eb1cc76069a9efe5714d087eccd.
RTS and DTR should not be modified based on CRTSCTS when calling
set_termios.
Modem control lines are raised at port open by the tty layer and should stay
raised regardless of whether hardware flow control is enabled or not.
This is in conformance with the way serial ports work today and many
applications depend on this behaviour to be able to talk to hardware
implementing hardware flow control (without the applications actually using
it).
Hardware which expects different behaviour on these lines can always
use TIOCMSET/TIOCMBI[SC] after port open to change them.
Reported-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Dave Mielke <dave@mielke.cc>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 967e5c6eb86a2ac562a62e142d36cdad451d36b0
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon Nov 15 11:35:49 2010 -0800
USB: misc: usbled: fix up some sysfs attribute permissions
commit 48f115470e68d443436b76b22dad63ffbffd6b97 upstream.
They should not be writable by any user.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a154f54e15663e700edafbf953fecb01b8ca7765
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon Nov 15 11:32:38 2010 -0800
USB: misc: cypress_cy7c63: fix up some sysfs attribute permissions
commit c990600d340641150f7270470a64bd99a5c0b225 upstream.
They should not be writable by any user.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oliver Bock <bock@tfh-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 92ff7352975cc5e700e853a8eec15a328a46267f
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon Nov 15 11:11:45 2010 -0800
USB: atm: ueagle-atm: fix up some permissions on the sysfs files
commit e502ac5e1eca99d7dc3f12b2a6780ccbca674858 upstream.
Some of the sysfs files had the incorrect permissions. Some didn't make
sense at all (writable for a file that you could not write to?)
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Damien Bergamini <damien.bergamini@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6d8870840bf5289d11b3d131ccc1ab0cdb5ff83e
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon Nov 15 11:17:52 2010 -0800
USB: storage: sierra_ms: fix sysfs file attribute
commit d9624e75f6ad94d8a0718c1fafa89186d271a78c upstream.
A non-writable sysfs file shouldn't have writable attributes.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kevin Lloyd <klloyd@sierrawireless.com>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5ae53c3f9f290b391063046414e297af58aa7817
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Tue Nov 16 10:57:37 2010 -0500
USB: EHCI: fix obscure race in ehci_endpoint_disable
commit 02e2c51ba3e80acde600721ea784c3ef84da5ea1 upstream.
This patch (as1435) fixes an obscure and unlikely race in ehci-hcd.
When an async URB is unlinked, the corresponding QH is removed from
the async list. If the QH's endpoint is then disabled while the URB
is being given back, ehci_endpoint_disable() won't find the QH on the
async list, causing it to believe that the QH has been lost. This
will lead to a memory leak at best and quite possibly to an oops.
The solution is to trust usbcore not to lose track of endpoints. If
the QH isn't on the async list then it doesn't need to be taken off
the list, but the driver should still wait for the QH to become IDLE
before disabling it.
In theory this fixes Bugzilla #20182. In fact the race is so rare
that it's not possible to tell whether the bug is still present.
However, adding delays and making other changes to force the race
seems to show that the patch works.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 458b0b08eff05179b09855eb36aa39a065b17d32
Author: John Tapsell <johnflux@gmail.com>
Date: Thu Mar 25 13:30:45 2010 +0000
Staging: rt2870: Add USB ID for Buffalo Airstation WLI-UC-GN
commit 251d380034c6c34efe75ffb89d863558ba68ec6a upstream.
BugLink: http://bugs.launchpad.net/bugs/441990
This was tested to successfully enable the hardware.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9f34fd7e76428bdd07f4ad10320b06f53b0b6ab2
Author: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat Nov 6 17:41:28 2010 +0300
usb: core: fix information leak to userland
commit 886ccd4520064408ce5876cfe00554ce52ecf4a7 upstream.
Structure usbdevfs_connectinfo is copied to userland with padding byted
after "slow" field uninitialized. It leads to leaking of contents of
kernel stack memory.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d66dbddd744d6bd67258bbc89dc01b4704374ff2
Author: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat Nov 6 17:41:31 2010 +0300
usb: misc: iowarrior: fix information leak to userland
commit eca67aaeebd6e5d22b0d991af1dd0424dc703bfb upstream.
Structure iowarrior_info is copied to userland with padding byted
between "serial" and "revision" fields uninitialized. It leads to
leaking of contents of kernel stack memory.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 0bd0e38c333e5bb69921ece2ba1d9c3e2d237b42
Author: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat Nov 6 17:41:35 2010 +0300
usb: misc: sisusbvga: fix information leak to userland
commit 5dc92cf1d0b4b0debbd2e333b83f9746c103533d upstream.
Structure sisusb_info is copied to userland with "sisusb_reserved" field
uninitialized. It leads to leaking of contents of kernel stack memory.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2516ccd05a94fc8298bb71d72aaacc1c5f820f2f
Author: ma rui <m00150988@huawei.com>
Date: Mon Nov 1 11:32:18 2010 +0800
USB: option: fix when the driver is loaded incorrectly for some Huawei devices.
commit 58c0d9d70109bd7e82bdb9517007311a48499960 upstream.
When huawei datacard with PID 0x14AC is insterted into Linux system, the
present kernel will load the "option" driver to all the interfaces. But
actually, some interfaces run as other function and do not need "option"
driver.
In this path, we modify the id_tables, when the PID is 0x14ac ,VID is
0x12d1, Only when the interface's Class is 0xff,Subclass is 0xff, Pro is
0xff, it does need "option" driver.
Signed-off-by: ma rui <m00150988@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b4a4132d624d2ca0498f51597a82a167f3efd598
Author: Peter Jones <pjones@redhat.com>
Date: Wed Sep 22 13:05:04 2010 -0700
efifb: check that the base address is plausible on pci systems
commit 85a00d9bbfb4704fbf368944b1cb9fed8f1598c5 upstream.
Some Apple machines have identical DMI data but different memory
configurations for the video. Given that, check that the address in our
table is actually within the range of a PCI BAR on a VGA device in the
machine.
This also fixes up the return value from set_system(), which has always
been wrong, but never resulted in bad behavior since there's only ever
been one matching entry in the dmi table.
The patch
1) stops people's machines from crashing when we get their display wrong,
which seems to be unfortunately inevitable,
2) allows us to support identical dmi data with differing video memory
configurations
This also adds me as the efifb maintainer, since I've effectively been
acting as such for quite some time.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 574f1725a7bda106e8eee1f979c49697feb42d20
Author: Darrick J. Wong <djwong@us.ibm.com>
Date: Tue Nov 16 09:13:41 2010 -0800
PCI: fix offset check for sysfs mmapped files
commit 8c05cd08a7504b855c265263e84af61aabafa329 upstream.
I just loaded 2.6.37-rc2 on my machines, and I noticed that X no longer starts.
Running an strace of the X server shows that it's doing this:
open("/sys/bus/pci/devices/0000:07:00.0/resource0", O_RDWR) = 10
mmap(NULL, 16777216, PROT_READ|PROT_WRITE, MAP_SHARED, 10, 0) = -1 EINVAL (Invalid argument)
This code seems to be asking for a shared read/write mapping of 16MB worth of
BAR0 starting at file offset 0, and letting the kernel assign a starting
address. Unfortunately, this -EINVAL causes X not to start. Looking into
dmesg, there's a complaint like so:
process "Xorg" tried to map 0x01000000 bytes at page 0x00000000 on 0000:07:00.0 BAR 0 (start 0x 96000000, size 0x 1000000)
...with the following code in pci_mmap_fits:
pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
if (start >= pci_start && start < pci_start + size &&
start + nr <= pci_start + size)
It looks like the logic here is set up such that when the mmap call comes via
sysfs, the check in pci_mmap_fits wants vma->vm_pgoff to be between the
resource's start and end address, and the end of the vma to be no farther than
the end. However, the sysfs PCI resource files always start at offset zero,
which means that this test always fails for programs that mmap the sysfs files.
Given the comment in the original commit
3b519e4ea618b6943a82931630872907f9ac2c2b, I _think_ the old procfs files
require that the file offset be equal to the resource's base address when
mmapping.
I think what we want here is for pci_start to be 0 when mmap_api ==
PCI_MMAP_PROCFS. The following patch makes that change, after which the Matrox
and Mach64 X drivers work again.
Acked-by: Martin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit db75b7e8269de3dd6768e55625f3139785fba3a8
Author: Martin Wilck <martin.wilck@ts.fujitsu.com>
Date: Wed Nov 10 11:03:21 2010 +0100
PCI: fix size checks for mmap() on /proc/bus/pci files
commit 3b519e4ea618b6943a82931630872907f9ac2c2b upstream.
The checks for valid mmaps of PCI resources made through /proc/bus/pci files
that were introduced in 9eff02e2042f96fb2aedd02e032eca1c5333d767 have several
problems:
1. mmap() calls on /proc/bus/pci files are made with real file offsets > 0,
whereas under /sys/bus/pci/devices, the start of the resource corresponds
to offset 0. This may lead to false negatives in pci_mmap_fits(), which
implicitly assumes the /sys/bus/pci/devices layout.
2. The loop in proc_bus_pci_mmap doesn't skip empty resouces. This leads
to false positives, because pci_mmap_fits() doesn't treat empty resources
correctly (the calculated size is 1 << (8*sizeof(resource_size_t)-PAGE_SHIFT)
in this case!).
3. If a user maps resources with BAR > 0, pci_mmap_fits will emit bogus
WARNINGS for the first resources that don't fit until the correct one is found.
On many controllers the first 2-4 BARs are used, and the others are empty.
In this case, an mmap attempt will first fail on the non-empty BARs
(including the "right" BAR because of 1.) and emit bogus WARNINGS because
of 3., and finally succeed on the first empty BAR because of 2.
This is certainly not the intended behaviour.
This patch addresses all 3 issues.
Updated with an enum type for the additional parameter for pci_mmap_fits().
Signed-off-by: Martin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit decc61d9f1f97a1f35e1ba69be343f9c4274bd52
Author: Tejun Heo <tj@kernel.org>
Date: Mon Nov 1 11:39:19 2010 +0100
libata: fix NULL sdev dereference race in atapi_qc_complete()
commit 2a5f07b5ec098edc69e05fdd2f35d3fbb1235723 upstream.
SCSI commands may be issued between __scsi_add_device() and dev->sdev
assignment, so it's unsafe for ata_qc_complete() to dereference
dev->sdev->locked without checking whether it's NULL or not. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fa63cf8d7fda913e5c473219ed4027ccf6d1d727
Author: Francisco Jerez <currojerez@riseup.net>
Date: Tue Sep 21 02:15:15 2010 +0200
drm/ttm: Clear the ghost cpu_writers flag on ttm_buffer_object_transfer.
commit 0fbecd400dd0a82d465b3086f209681e8c54cb0f upstream.
It makes sense for a BO to move after a process has requested
exclusive RW access on it (e.g. because the BO used to be located in
unmappable VRAM and we intercepted the CPU access from the fault
handler).
If we let the ghost object inherit cpu_writers from the original
object, ttm_bo_release_list() will raise a kernel BUG when the ghost
object is destroyed. This can be reproduced with the nouveau driver on
nv5x.
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e04e0db0e3c8fe2aafc618c1dd1bd1357e14be58
Author: Jens Axboe <jaxboe@fusionio.com>
Date: Wed Nov 10 14:36:25 2010 +0100
bio: take care not overflow page count when mapping/copying user data
commit cb4644cac4a2797afc847e6c92736664d4b0ea34 upstream.
If the iovec is being set up in a way that causes uaddr + PAGE_SIZE
to overflow, we could end up attempting to map a huge number of
pages. Check for this invalid input type.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 459af1da6108bd3cc9dcee2df7399b7659f95426
Author: Dave Hansen <dave@linux.vnet.ibm.com>
Date: Thu Nov 11 14:05:15 2010 -0800
mm/vfs: revalidate page->mapping in do_generic_file_read()
commit 8d056cb965b8fb7c53c564abf28b1962d1061cd3 upstream.
70 hours into some stress tests of a 2.6.32-based enterprise kernel, we
ran into a NULL dereference in here:
int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
unsigned long from)
{
----> struct inode *inode = page->mapping->host;
It looks like page->mapping was the culprit. (xmon trace is below).
After closer examination, I realized that do_generic_file_read() does a
find_get_page(), and eventually locks the page before calling
block_is_partially_uptodate(). However, it doesn't revalidate the
page->mapping after the page is locked. So, there's a small window
between the find_get_page() and ->is_partially_uptodate() where the page
could get truncated and page->mapping cleared.
We _have_ a reference, so it can't get reclaimed, but it certainly
can be truncated.
I think the correct thing is to check page->mapping after the
trylock_page(), and jump out if it got truncated. This patch has been
running in the test environment for a month or so now, and we have not
seen this bug pop up again.
xmon info:
1f:mon> e
cpu 0x1f: Vector: 300 (Data Access) at [c0000002ae36f770]
pc: c0000000001e7a6c: .block_is_partially_uptodate+0xc/0x100
lr: c000000000142944: .generic_file_aio_read+0x1e4/0x770
sp: c0000002ae36f9f0
msr: 8000000000009032
dar: 0
dsisr: 40000000
current = 0xc000000378f99e30
paca = 0xc000000000f66300
pid = 21946, comm = bash
1f:mon> r
R00 = 0025c0500000006d R16 = 0000000000000000
R01 = c0000002ae36f9f0 R17 = c000000362cd3af0
R02 = c000000000e8cd80 R18 = ffffffffffffffff
R03 = c0000000031d0f88 R19 = 0000000000000001
R04 = c0000002ae36fa68 R20 = c0000003bb97b8a0
R05 = 0000000000000000 R21 = c0000002ae36fa68
R06 = 0000000000000000 R22 = 0000000000000000
R07 = 0000000000000001 R23 = c0000002ae36fbb0
R08 = 0000000000000002 R24 = 0000000000000000
R09 = 0000000000000000 R25 = c000000362cd3a80
R10 = 0000000000000000 R26 = 0000000000000002
R11 = c0000000001e7b60 R27 = 0000000000000000
R12 = 0000000042000484 R28 = 0000000000000001
R13 = c000000000f66300 R29 = c0000003bb97b9b8
R14 = 0000000000000001 R30 = c000000000e28a08
R15 = 000000000000ffff R31 = c0000000031d0f88
pc = c0000000001e7a6c .block_is_partially_uptodate+0xc/0x100
lr = c000000000142944 .generic_file_aio_read+0x1e4/0x770
msr = 8000000000009032 cr = 22000488
ctr = c0000000001e7a60 xer = 0000000020000000 trap = 300
dar = 0000000000000000 dsisr = 40000000
1f:mon> t
[link register ] c000000000142944 .generic_file_aio_read+0x1e4/0x770
[c0000002ae36f9f0] c000000000142a14 .generic_file_aio_read+0x2b4/0x770 (unreliable)
[c0000002ae36fb40] c0000000001b03e4 .do_sync_read+0xd4/0x160
[c0000002ae36fce0] c0000000001b153c .vfs_read+0xec/0x1f0
[c0000002ae36fd80] c0000000001b1768 .SyS_read+0x58/0xb0
[c0000002ae36fe30] c00000000000852c syscall_exit+0x0/0x40
--- Exception: c00 (System Call) at 00000080a840bc54
SP (fffca15df30) is in userspace
1f:mon> di c0000000001e7a6c
c0000000001e7a6c e9290000 ld r9,0(r9)
c0000000001e7a70 418200c0 beq c0000000001e7b30 # .block_is_partially_uptodate+0xd0/0x100
c0000000001e7a74 e9440008 ld r10,8(r4)
c0000000001e7a78 78a80020 clrldi r8,r5,32
c0000000001e7a7c 3c000001 lis r0,1
c0000000001e7a80 812900a8 lwz r9,168(r9)
c0000000001e7a84 39600001 li r11,1
c0000000001e7a88 7c080050 subf r0,r8,r0
c0000000001e7a8c 7f805040 cmplw cr7,r0,r10
c0000000001e7a90 7d6b4830 slw r11,r11,r9
c0000000001e7a94 796b0020 clrldi r11,r11,32
c0000000001e7a98 419d00a8 bgt cr7,c0000000001e7b40 # .block_is_partially_uptodate+0xe0/0x100
c0000000001e7a9c 7fa55840 cmpld cr7,r5,r11
c0000000001e7aa0 7d004214 add r8,r0,r8
c0000000001e7aa4 79080020 clrldi r8,r8,32
c0000000001e7aa8 419c0078 blt cr7,c0000000001e7b20 # .block_is_partially_uptodate+0xc0/0x100
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <arunabal@in.ibm.com>
Cc: <sbest@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 08f41fe804d2c008e38b199afbb06e6d5d493d85
Author: Ken Chen <kenchen@google.com>
Date: Thu Nov 11 14:05:16 2010 -0800
latencytop: fix per task accumulator
commit 38715258aa2e8cd94bd4aafadc544e5104efd551 upstream.
Per task latencytop accumulator prematurely terminates due to erroneous
placement of latency_record_count. It should be incremented whenever a
new record is allocated instead of increment on every latencytop event.
Also fix search iterator to only search known record events instead of
blindly searching all pre-allocated space.
Signed-off-by: Ken Chen <kenchen@google.com>
Reviewed-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8bef02493a914dbb950c0782f23d0c1fa4687303
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date: Thu Oct 28 12:34:21 2010 +0200
netfilter: nf_conntrack: allow nf_ct_alloc_hashtable() to get highmem pages
commit 6b1686a71e3158d3c5f125260effce171cc7852b upstream.
commit ea781f197d6a8 (use SLAB_DESTROY_BY_RCU and get rid of call_rcu())
did a mistake in __vmalloc() call in nf_ct_alloc_hashtable().
I forgot to add __GFP_HIGHMEM, so pages were taken from LOWMEM only.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a689967c41a4bff4f652dcd6f9f5c8d14502aea5
Author: Daniel T Chen <crimsun@ubuntu.com>
Date: Wed Dec 1 19:16:07 2010 -0500
ALSA: hda: Use "alienware" model quirk for another SSID
commit 0defe09ca70daccdc83abd9c3c24cd89ae6a1141 upstream.
BugLink: https://launchpad.net/bugs/683695
The original reporter states that headphone jacks do not appear to
work. Upon inspecting his codec dump, and upon further testing, it is
confirmed that the "alienware" model quirk is correct.
Reported-and-tested-by: Cody Thierauf
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 36598470fcd3de077f1e39e5b1cc38639403475c
Author: David Henningsson <david.henningsson@canonical.com>
Date: Wed Nov 24 14:17:47 2010 +0100
ALSA: HDA: Add an extra DAC for Realtek ALC887-VD
commit cc1c452e509aefc28f7ad2deed75bc69d4f915f7 upstream.
The patch enables ALC887-VD to use the DAC at nid 0x26,
which makes it possible to use this DAC for e g Headphone
volume.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9d96791016c2890df955320a8fe973801543314b
Author: Daniel T Chen <crimsun@ubuntu.com>
Date: Mon Nov 1 01:14:51 2010 -0400
ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls
commit 0613a59456980161d0cd468bae6c63d772743102 upstream.
BugLink: https://launchpad.net/bugs/669279
The original reporter states: "The Master mixer does not change the
volume from the headphone output (which is affected by the headphone
mixer). Instead it only seems to control the on-board speaker volume.
This confuses PulseAudio greatly as the Master channel is merged into
the volume mix."
Fix this symptom by applying the hp_only quirk for the reporter's SSID.
The fix is applicable to all stable kernels.
Reported-and-tested-by: Ben Gamari <bgamari@gmail.com>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 629a1b5e416d5710216d29feb511e7663f14b43e
Author: Kailang Yang <kailang@realtek.com>
Date: Mon Nov 22 10:59:36 2010 +0100
ALSA: hda - Fixed ALC887-VD initial error
commit 01e0f1378c47947b825eac05c98697ab1be1c86f upstream.
ALC887-VD is like ALC888-VD. It can not be initialized as ALC882.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 577a1f5152a24d2a8a93a6d8c31d8601081d5ce3
Author: Clemens Ladisch <clemens@ladisch.de>
Date: Mon Oct 25 11:42:20 2010 +0200
firewire: ohci: fix race in AR split packet handling
commit a1f805e5e73a8fe166b71c6592d3837df0cd5e2e upstream.
When handling an AR buffer that has been completely filled, we assumed
that its descriptor will not be read by the controller and can be
overwritten. However, when the last received packet happens to end at
the end of the buffer, the controller might not yet have moved on to the
next buffer and might read the branch address later. If we overwrite
and free the page before that, the DMA context will either go dead
because of an invalid Z value, or go off into some random memory.
To fix this, ensure that the descriptor does not get overwritten by
using only the actual buffer instead of the entire page for reassembling
the split packet. Furthermore, to avoid freeing the page too early,
move on to the next buffer only when some data in it guarantees that the
controller has moved on.
This should eliminate the remaining firewire-net problems.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 72f7e77b79a00ea56c7d76e3a95833ace58e4b9a
Author: Clemens Ladisch <clemens@ladisch.de>
Date: Mon Oct 25 11:41:53 2010 +0200
firewire: ohci: fix buffer overflow in AR split packet handling
commit 85f7ffd5d2b320f73912b15fe8cef34bae297daf upstream.
When the controller had to split a received asynchronous packet into two
buffers, the driver tries to reassemble it by copying both parts into
the first page. However, if size + rest > PAGE_SIZE, i.e., if the yet
unhandled packets before the split packet, the split packet itself, and
any received packets after the split packet are together larger than one
page, then the memory after the first page would get overwritten.
To fix this, do not try to copy the data of all unhandled packets at
once, but copy the possibly needed data every time when handling
a packet.
This gets rid of most of the infamous crashes and data corruptions when
using firewire-net.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fd001db6fa4b80657520cb070efee71cd1f560fa
Author: Jiri Slaby <jslaby@suse.cz>
Date: Thu Nov 25 00:27:54 2010 +0100
TTY: ldisc, fix open flag handling
commit 7f90cfc505d613f4faf096e0d84ffe99208057d9 upstream.
When a concrete ldisc open fails in tty_ldisc_open, we forget to clear
TTY_LDISC_OPEN. This causes a false warning on the next ldisc open:
WARNING: at drivers/char/tty_ldisc.c:445 tty_ldisc_open+0x26/0x38()
Hardware name: System Product Name
Modules linked in: ...
Pid: 5251, comm: a.out Tainted: G W 2.6.32-5-686 #1
Call Trace:
[<c1030321>] ? warn_slowpath_common+0x5e/0x8a
[<c1030357>] ? warn_slowpath_null+0xa/0xc
[<c119311c>] ? tty_ldisc_open+0x26/0x38
[<c11936c5>] ? tty_set_ldisc+0x218/0x304
...
So clear the bit when failing...
Introduced in c65c9bc3efa (tty: rewrite the ldisc locking) back in
2.6.31-rc1.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Reported-by: Sergey Lapin <slapin@ossfans.org>
Tested-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 28bda4eca2f7b1677087cc229cedf1a932fcc8fb
Author: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Date: Wed Oct 27 17:13:21 2010 +0200
tty_ldisc: Fix BUG() on hangup
commit 1c95ba1e1de7edffc0c4e275e147f1a9eb1f81ae upstream.
A kernel BUG when bluetooth rfcomm connection drop while the associated
serial port is open is sometime triggered.
It seems that the line discipline can disappear between the
tty_ldisc_put and tty_ldisc_get. This patch fall back to the N_TTY line
discipline if the previous discipline is not available anymore.
Signed-off-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 827136988433fec7a45b3b20b59bdf03e33cf918
Author: Jiri Slaby <jslaby@suse.cz>
Date: Sun Oct 31 23:17:51 2010 +0100
TTY: restore tty_ldisc_wait_idle
commit 100eeae2c5ce23b4db93ff320ee330ef1d740151 upstream.
It was removed in 65b770468e98 (tty-ldisc: turn ldisc user count into
a proper refcount), but we need to wait for last user to quit the
ldisc before we close it in tty_set_ldisc.
Otherwise weird things start to happen. There might be processes
waiting in tty_read->n_tty_read on tty->read_wait for input to appear
and at that moment, a change of ldisc is fatal. n_tty_close is called,
it frees read_buf and the waiting process is still in the middle of
reading and goes nuts after it is woken.
Previously we prevented close to happen when others are in ldisc ops
by tty_ldisc_wait_idle in tty_set_ldisc. But the commit above removed
that. So revoke the change and test whether there is 1 user (=we), and
allow the close then.
We can do that without ldisc/tty locks, because nobody else can open
the device due to TTY_LDISC_CHANGING bit set, so we in fact wait for
everybody to leave.
I don't understand why tty_ldisc_lock would be needed either when the
counter is an atomic variable, so this is a lockless
tty_ldisc_wait_idle.
On the other hand, if we fail to wait (timeout or signal), we have to
reenable the halted ldiscs, so we take ldisc lock and reuse the setup
path at the end of tty_set_ldisc.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc>
LKML-Reference: <20101031104136.GA511@Chamillionaire.breakpoint.cc>
LKML-Reference: <1287669539-22644-1-git-send-email-jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 83da3263835bfa8d6c9a6c475b95da219bd82c31
Author: Jiri Olsa <jolsa@redhat.com>
Date: Mon Nov 8 19:01:47 2010 +0100
tty: prevent DOS in the flush_to_ldisc
commit e045fec48970df84647a47930fcf7a22ff7229c0 upstream.
There's a small window inside the flush_to_ldisc function,
where the tty is unlocked and calling ldisc's receive_buf
function. If in this window new buffer is added to the tty,
the processing might never leave the flush_to_ldisc function.
This scenario will hog the cpu, causing other tty processing
starving, and making it impossible to interface the computer
via tty.
I was able to exploit this via pty interface by sending only
control characters to the master input, causing the flush_to_ldisc
to be scheduled, but never actually generate any output.
To reproduce, please run multiple instances of following code.
- SNIP
#define _XOPEN_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
int main(int argc, char **argv)
{
int i, slave, master = getpt();
char buf[8192];
sprintf(buf, "%s", ptsname(master));
grantpt(master);
unlockpt(master);
slave = open(buf, O_RDWR);
if (slave < 0) {
perror("open slave failed");
return 1;
}
for(i = 0; i < sizeof(buf); i++)
buf[i] = rand() % 32;
while(1) {
write(master, buf, sizeof(buf));
}
return 0;
}
- SNIP
The attached patch (based on -next tree) fixes this by checking on the
tty buffer tail. Once it's reached, the current work is rescheduled
and another could run.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 47755c2aa1e10d2b743716a7fc9dcc91ed36af33
Author: Justin Maggard <jmaggard10@gmail.com>
Date: Wed Nov 24 16:36:17 2010 +1100
md: fix return value of rdev_size_change()
commit c26a44ed1e552aaa1d4ceb71842002d235fe98d7 upstream.
When trying to grow an array by enlarging component devices,
rdev_size_store() expects the return value of rdev_size_change() to be
in sectors, but the actual value is returned in KBs.
This functionality was broken by commit
dd8ac336c13fd8afdb082ebacb1cddd5cf727889
so this patch is suitable for any kernel since 2.6.30.
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 440692ac192c43876bf2f21f7f215dd037e2a823
Author: NeilBrown <neilb@suse.de>
Date: Wed Nov 24 16:39:46 2010 +1100
md/raid1: really fix recovery looping when single good device fails.
commit 8f9e0ee38f75d4740daa9e42c8af628d33d19a02 upstream.
Commit 4044ba58dd15cb01797c4fd034f39ef4a75f7cc3 supposedly fixed a
problem where if a raid1 with just one good device gets a read-error
during recovery, the recovery would abort and immediately restart in
an infinite loop.
However it depended on raid1_remove_disk removing the spare device
from the array. But that does not happen in this case. So add a test
so that in the 'recovery_disabled' case, the device will be removed.
This suitable for any kernel since 2.6.29 which is when
recovery_disabled was introduced.
Reported-by: Sebastian Färber <faerber@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ffcac2098d79a1d68eaddcf05d5b6aecfde6a41c
Author: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Thu Sep 23 02:35:04 2010 -0500
eCryptfs: Clear LOOKUP_OPEN flag when creating lower file
commit 2e21b3f124eceb6ab5a07c8a061adce14ac94e14 upstream.
eCryptfs was passing the LOOKUP_OPEN flag through to the lower file
system, even though ecryptfs_create() doesn't support the flag. A valid
filp for the lower filesystem could be returned in the nameidata if the
lower file system's create() function supported LOOKUP_OPEN, possibly
resulting in unencrypted writes to the lower file.
However, this is only a potential problem in filesystems (FUSE, NFS,
CIFS, CEPH, 9p) that eCryptfs isn't known to support today.
https://bugs.launchpad.net/ecryptfs/+bug/641703
Reported-by: Kevin Buhr
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit dbd39f4c57e6bb0d941b19380b02992666bb1169
Author: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Wed Sep 22 02:33:52 2010 +0000
viafb: use proper register for colour when doing fill ops
commit efd4f6398dc92b5bf392670df862f42a19f34cf2 upstream.
The colour was written to a wrong register for fillrect operations.
This sometimes caused empty console space (for example after 'clear')
to have a different colour than desired. Fix this by writing to the
correct register.
Many thanks to Daniel Drake and Jon Nettleton for pointing out this
issue and pointing me in the right direction for the fix.
Fixes http://dev.laptop.org/ticket/9323
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d569283b9aef5cc8a56f81596018b9d09951a548
Author: Graham Gower <graham.gower@gmail.com>
Date: Wed Oct 27 15:33:00 2010 -0700
drivers/char/vt_ioctl.c: fix VT_OPENQRY error value
commit 1e0ad2881d50becaeea70ec696a80afeadf944d2 upstream.
When all VT's are in use, VT_OPENQRY casts -1 to unsigned char before
returning it to userspace as an int. VT255 is not the next available
console.
Signed-off-by: Graham Gower <graham.gower@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 57a14e526c888cf99015f52320ffab89d8f2eda6
Author: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri Oct 22 04:38:26 2010 +0000
net: NETIF_F_HW_CSUM does not imply FCoE CRC offload
commit 66c68bcc489fadd4f5e8839e966e3a366e50d1d5 upstream.
NETIF_F_HW_CSUM indicates the ability to update an TCP/IP-style 16-bit
checksum with the checksum of an arbitrary part of the packet data,
whereas the FCoE CRC is something entirely different.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5572adc7b7f7694b2ea4abcc87eb81a6bb64656e
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Thu Sep 30 15:15:31 2010 -0700
sys_semctl: fix kernel stack leakage
commit 982f7c2b2e6a28f8f266e075d92e19c0dd4c6e56 upstream.
The semctl syscall has several code paths that lead to the leakage of
uninitialized kernel stack memory (namely the IPC_INFO, SEM_INFO,
IPC_STAT, and SEM_STAT commands) during the use of the older, obsolete
version of the semid_ds struct.
The copy_semid_to_user() function declares a semid_ds struct on the stack
and copies it back to the user without initializing or zeroing the
"sem_base", "sem_pending", "sem_pending_last", and "undo" pointers,
allowing the leakage of 16 bytes of kernel stack memory.
The code is still reachable on 32-bit systems - when calling semctl()
newer glibc's automatically OR the IPC command with the IPC_64 flag, but
invoking the syscall directly allows users to use the older versions of
the struct.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit cebb2f20e037878d8c4f7402f3e8b73e855b72d5
Author: Vasiliy Kulikov <segooon@gmail.com>
Date: Sat Oct 30 18:22:49 2010 +0400
ipc: shm: fix information leak to userland
commit 3af54c9bd9e6f14f896aac1bb0e8405ae0bc7a44 upstream.
The shmid_ds structure is copied to userland with shm_unused{,2,3}
fields unitialized. It leads to leaking of contents of kernel stack
memory.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3cb129c0ea32cb70e982551a8f6f578e46f0f0a8
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed Oct 27 15:34:17 2010 -0700
ipc: initialize structure memory to zero for compat functions
commit 03145beb455cf5c20a761e8451e30b8a74ba58d9 upstream.
This takes care of leaking uninitialized kernel stack memory to
userspace from non-zeroed fields in structs in compat ipc functions.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7ee77118ebd4b01892adaef73633f61dcffc57b3
Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon Nov 29 14:16:53 2010 -0800
xen: don't bother to stop other cpus on shutdown/reboot
commit 31e323cca9d5c8afd372976c35a5d46192f540d1 upstream.
Xen will shoot all the VCPUs when we do a shutdown hypercall, so there's
no need to do it manually.
In any case it will fail because all the IPI irqs have been pulled
down by this point, so the cross-CPU calls will simply hang forever.
Until change 76fac077db6b34e2c6383a7b4f3f4f7b7d06d8ce the function calls
were not synchronously waited for, so this wasn't apparent. However after
that change the calls became synchronous leading to a hang on shutdown
on multi-VCPU guests.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit daf650021ea06a0490f2cbb9709c422969b1d3ea
Author: Ian Campbell <ian.campbell@citrix.com>
Date: Fri Oct 8 16:59:12 2010 +0100
xen: ensure that all event channels start off bound to VCPU 0
commit b0097adeec27e30223c989561ab0f7aa60d1fe93 upstream.
All event channels startbound to VCPU 0 so ensure that cpu_evtchn_mask
is initialised to reflect this. Otherwise there is a race after registering an
event channel but before the affinity is explicitly set where the event channel
can be delivered. If this happens then the event channel remains pending in the
L1 (evtchn_pending) array but is cleared in L2 (evtchn_pending_sel), this means
the event channel cannot be reraised until another event channel happens to
trigger the same L2 entry on that VCPU.
sizeof(cpu_evtchn_mask(0))==sizeof(unsigned long*) which is not correct, and
causes only the first 32 or 64 event channels (depending on architecture) to be
initially bound to VCPU0. Use sizeof(struct cpu_evtchn_s) instead.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 998eaeb0802f35212659849de50ff0ae751f4ad7
Author: Robin@sgi.com <Robin@sgi.com>
Date: Wed Nov 24 12:56:59 2010 -0800
sgi-xpc: XPC fails to discover partitions with all nasids above 128
commit c22c7aeff69796f46ae0fcec141538e28f50b24e upstream.
UV hardware defines 256 memory protection regions versus the baseline 64
with increasing size for the SN2 ia64. This was overlooked when XPC was
modified to accomodate both UV and SN2.
Without this patch, a user could reconfigure their existing system and
suddenly disable cross-partition communications with no indication of what
has gone wrong. It also prevents larger configurations from using
cross-partition communication.
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6b9f631802b55b9fbc1d2c1064ae10b67ecbbe2d
Author: Daniel Klaffenbach <danielklaffenbach@gmail.com>
Date: Fri Nov 19 21:25:21 2010 -0600
ssb: b43-pci-bridge: Add new vendor for BCM4318
commit 1d8638d4038eb8709edc80e37a0bbb77253d86e9 upstream.
Add new vendor for Broadcom 4318.
Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4057f5d12cf78af68f68b089bce34376d238245f
Author: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue Oct 26 14:22:08 2010 -0700
mm: fix is_mem_section_removable() page_order BUG_ON check
commit 572438f9b52236bd8938b1647cc15e027d27ef55 upstream.
page_order() is called by memory hotplug's user interface to check the
section is removable or not. (is_mem_section_removable())
It calls page_order() withoug holding zone->lock.
So, even if the caller does
if (PageBuddy(page))
ret = page_order(page) ...
The caller may hit BUG_ON().
For fixing this, there are 2 choices.
1. add zone->lock.
2. remove BUG_ON().
is_mem_section_removable() is used for some "advice" and doesn't need to
be 100% accurate. This is_removable() can be called via user program..
We don't want to take this important lock for long by user's request. So,
this patch removes BUG_ON().
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d7d57d893e18626af42e66bfa0c4692c6e592181
Author: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue Oct 26 14:21:10 2010 -0700
mm: fix return value of scan_lru_pages in memory unplug
commit f8f72ad5396987e05a42cf7eff826fb2a15ff148 upstream.
scan_lru_pages returns pfn. So, it's type should be "unsigned long"
not "int".
Note: I guess this has been work until now because memory hotplug tester's
machine has not very big memory....
physical address < 32bit << PAGE_SHIFT.
Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 20c2cc34ba06450310c5d04e51a63fae619b3e1d
Author: Jean Delvare <khali@linux-fr.org>
Date: Thu Oct 28 20:31:50 2010 +0200
hwmon: (lm85) Fix ADT7468 frequency table
commit fa7a5797e57d2ed71f9a6fb44f0ae42c2d7b74b7 upstream.
The ADT7468 uses the same frequency table as the ADT7463.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 967074811d5e0cf62c2dd298e1a2cfa564979aca
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed Oct 27 19:33:43 2010 +0200
numa: fix slab_node(MPOL_BIND)
commit 800416f799e0723635ac2d720ad4449917a1481c upstream.
When a node contains only HighMem memory, slab_node(MPOL_BIND)
dereferences a NULL pointer.
[ This code seems to go back all the way to commit 19770b32609b: "mm:
filter based on a nodemask as well as a gfp_mask". Which was back in
April 2008, and it got merged into 2.6.26. - Linus ]
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6295a5d0fa59cda35b9bcca230524a7397923663
Author: Richard Weinberger <richard@nod.at>
Date: Tue Oct 26 14:21:13 2010 -0700
um: fix global timer issue when using CONFIG_NO_HZ
commit 482db6df1746c4fa7d64a2441d4cb2610249c679 upstream.
This fixes a issue which was introduced by fe2cc53e ("uml: track and make
up lost ticks").
timeval_to_ns() returns long long and not int. Due to that UML's timer
did not work properlt and caused timer freezes.
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 417bcaef1160833d07668a3394d292617c25d5f5
Author: Richard Weinberger <richard@nod.at>
Date: Tue Oct 26 14:21:16 2010 -0700
um: remove PAGE_SIZE alignment in linker script causing kernel segfault.
commit 6915e04f8847bea16d0890f559694ad8eedd026c upstream.
The linker script cleanup that I did in commit 5d150a97f93 ("um: Clean up
linker script using standard macros.") (2.6.32) accidentally introduced an
ALIGN(PAGE_SIZE) when converting to use INIT_TEXT_SECTION; Richard
Weinberger reported that this causes the kernel to segfault with
CONFIG_STATIC_LINK=y.
I'm not certain why this extra alignment is a problem, but it seems likely
it is because previously
__init_begin = _stext = _text = _sinittext
and with the extra ALIGN(PAGE_SIZE), _sinittext becomes different from the
rest. So there is likely a bug here where something is assuming that
_sinittext is the same as one of those other symbols. But reverting the
accidental change fixes the regression, so it seems worth committing that
now.
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Reported-by: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Tested by: Antoine Martin <antoine@nagafix.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1f383de442a419719650d3ff4c0aa7542f301a92
Author: Masanori ITOH <itoumsn@nttdata.co.jp>
Date: Tue Oct 26 14:21:20 2010 -0700
percpu: fix list_head init bug in __percpu_counter_init()
commit 8474b591faf3bb0a1e08a60d21d6baac498f15e4 upstream.
WARNING: at lib/list_debug.c:26 __list_add+0x3f/0x81()
Hardware name: Express5800/B120a [N8400-085]
list_add corruption. next->prev should be prev (ffffffff81a7ea00), but was dead000000200200. (next=ffff88080b872d58).
Modules linked in: aoe ipt_MASQUERADE iptable_nat nf_nat autofs4 sunrpc bridge 8021q garp stp llc ipv6 cpufreq_ondemand acpi_cpufreq freq_table dm_round_robin dm_multipath kvm_intel kvm uinput lpfc scsi_transport_fc igb ioatdma scsi_tgt i2c_i801 i2c_core dca iTCO_wdt iTCO_vendor_support pcspkr shpchp megaraid_sas [last unloaded: aoe]
Pid: 54, comm: events/3 Tainted: G W 2.6.34-vanilla1 #1
Call Trace:
[<ffffffff8104bd77>] warn_slowpath_common+0x7c/0x94
[<ffffffff8104bde6>] warn_slowpath_fmt+0x41/0x43
[<ffffffff8120fd2e>] __list_add+0x3f/0x81
[<ffffffff81212a12>] __percpu_counter_init+0x59/0x6b
[<ffffffff810d8499>] bdi_init+0x118/0x17e
[<ffffffff811f2c50>] blk_alloc_queue_node+0x79/0x143
[<ffffffff811f2d2b>] blk_alloc_queue+0x11/0x13
[<ffffffffa02a931d>] aoeblk_gdalloc+0x8e/0x1c9 [aoe]
[<ffffffffa02aa655>] aoecmd_sleepwork+0x25/0xa8 [aoe]
[<ffffffff8106186c>] worker_thread+0x1a9/0x237
[<ffffffffa02aa630>] ? aoecmd_sleepwork+0x0/0xa8 [aoe]
[<ffffffff81065827>] ? autoremove_wake_function+0x0/0x39
[<ffffffff810616c3>] ? worker_thread+0x0/0x237
[<ffffffff810653ad>] kthread+0x7f/0x87
[<ffffffff8100aa24>] kernel_thread_helper+0x4/0x10
[<ffffffff8106532e>] ? kthread+0x0/0x87
[<ffffffff8100aa20>] ? kernel_thread_helper+0x0/0x10
It's because there is no initialization code for a list_head contained in
the struct backing_dev_info under CONFIG_HOTPLUG_CPU, and the bug comes up
when block device drivers calling blk_alloc_queue() are used. In case of
me, I got them by using aoe.
Signed-off-by: Masanori Itoh <itoumsn@nttdata.co.jp>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f2318dc7f5c66e3cd21eaf8ce92d0b0298bed1fb
Author: Richard A. Smith <richard@laptop.org>
Date: Sat Sep 25 19:19:26 2010 +0100
olpc_battery: Fix endian neutral breakage for s16 values
commit 7cfbb29466633e6ecdc14f76a693c8478c2b22af upstream.
When the driver was updated to be endian neutral (8e9c7716c)
the signed part of the s16 values was lost. This is because be16_to_cpu()
returns an unsigned value. This patch casts the values back to a s16
number prior to the the implicit cast up to an int.
Signed-off-by: Richard A. Smith <richard@laptop.org>
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a8db638a4812c4b171f567c973c6c4d67b9f15c2
Author: Jiri Slaby <jslaby@suse.cz>
Date: Tue Oct 26 14:22:11 2010 -0700
hpet: unmap unused I/O space
commit a56d5318716d120e040294bb258901ba89fb9c90 upstream.
When the initialization code in hpet finds a memory resource and does not
find an IRQ, it does not unmap the memory resource previously mapped.
There are buggy BIOSes which report resources exactly like this and what
is worse the memory region bases point to normal RAM. This normally would
not matter since the space is not touched. But when PAT is turned on,
ioremap causes the page to be uncached and sets this bit in page->flags.
Then when the page is about to be used by the allocator, it is reported
as:
BUG: Bad page state in process md5sum pfn:3ed00
page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0
page flags: 0x20000001000000(uncached)
Pid: 7956, comm: md5sum Not tainted 2.6.34-12-desktop #1
Call Trace:
[<ffffffff810df851>] bad_page+0xb1/0x100
[<ffffffff810dfa45>] prep_new_page+0x1a5/0x1c0
[<ffffffff810dfe01>] get_page_from_freelist+0x3a1/0x640
[<ffffffff810e01af>] __alloc_pages_nodemask+0x10f/0x6b0
...
In this particular case:
1) HPET returns 3ed00000 as memory region base, but it is not in
reserved ranges reported by the BIOS (excerpt):
BIOS-e820: 0000000000100000 - 00000000af6cf000 (usable)
BIOS-e820: 00000000af6cf000 - 00000000afdcf000 (reserved)
2) there is no IRQ resource reported by HPET method. On the other
hand, the Intel HPET specs (1.0a) says (3.2.5.1):
_CRS (
// Report 1K of memory consumed by this Timer Block
memory range consumed
// Optional: only used if BIOS allocates Interrupts [1]
IRQs consumed
)
[1] For case where Timer Block is configured to consume IRQ0/IRQ8 AND
Legacy 8254/Legacy RTC hardware still exists, the device objects
associated with 8254 & RTC devices should not report IRQ0/IRQ8 as
"consumed resources".
So in theory we should check whether if it is the case and use those
interrupts instead.
Anyway the address reported by the BIOS here is bogus, so non-presence
of IRQ doesn't mean the "optional" part in point 2).
Since I got no reply previously, fix this by simply unmapping the space
when IRQ is not found and memory region was mapped previously. It would
be probably more safe to walk the resources again and unmap appropriately
depending on type. But as we now use only ioremap for both 2 memory
resource types, it is not necessarily needed right now.
Addresses https://bugzilla.novell.com/show_bug.cgi?id=629908
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 157a8a683026fdc98d0ba48e2cc3ce100403a2ce
Author: Clemens Ladisch <clemens@ladisch.de>
Date: Tue Oct 26 14:22:13 2010 -0700
hpet: fix unwanted interrupt due to stale irq status bit
commit 96e9694df446d1154ec2f4fdba8908588b9cba38 upstream.
Jaswinder Singh Rajput wrote:
> By executing Documentation/timers/hpet_example.c
>
> for polling, I requested for 3 iterations but it seems iteration work
> for only 2 as first expired time is always very small.
>
> # ./hpet_example poll /dev/hpet 10 3
> -hpet: executing poll
> hpet_poll: info.hi_flags 0x0
> hpet_poll: expired time = 0x13
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1
> hpet_poll: expired time = 0x1868c
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1
> hpet_poll: expired time = 0x18645
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1
Clearing the HPET interrupt enable bit disables interrupt generation
but does not disable the timer, so the interrupt status bit will still
be set when the timer elapses. If another interrupt arrives before
the timer has been correctly programmed (due to some other device on
the same interrupt line, or CONFIG_DEBUG_SHIRQ), this results in an
extra unwanted interrupt event because the status bit is likely to be
set from comparator matches that happened before the device was opened.
Therefore, we have to ensure that the interrupt status bit is and
stays cleared until we actually program the timer.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-by: Jaswinder Singh Rajput <jaswinderlinux@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Bob Picco <bpicco@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit cf4feb1acab5e9f00d7c64327d8508573f579420
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue Nov 16 11:23:33 2010 -0800
Staging: line6: fix up some sysfs attribute permissions
commit 2018845b6a169f75341f8e68ad1089cb6697cf24 and
2018845b6a169f75341f8e68ad1089cb6697cf24 upstream merged together as it
had to be backported by hand.
They should not be writable by any user
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2247463fc62ef3ccedd1d6b1e64e910b8c4fa276
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu Nov 18 11:21:04 2010 -0800
Staging: asus_oled: fix up my fixup for some sysfs attribute permissions
commit 515b4987ccd097cdf5416530b05fdf9e01afe95a upstream.
They should be writable by root, not readable.
Doh, stupid me with the wrong flags.
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ea92789ccaa9db00d73079f669405b3d2c775e0b
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue Nov 16 11:17:01 2010 -0800
Staging: asus_oled: fix up some sysfs attribute permissions
commit 590b0b9754bd8928926bae7194b6da7ead9bda3b upstream.
They should not be writable by any user
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bc62f2056eefd5996afb73c4afe59d79da12c484
Author: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu Dec 2 14:31:16 2010 -0800
reiserfs: don't acquire lock recursively in reiserfs_acl_chmod
commit 238af8751f64a75f8b638193353b1c31ea32e738 upstream.
reiserfs_acl_chmod() can be called by reiserfs_set_attr() and then take
the reiserfs lock a second time. Thereafter it may call journal_begin()
that definitely requires the lock not to be nested in order to release
it before taking the journal mutex because the reiserfs lock depends on
the journal mutex already.
So, aviod nesting the lock in reiserfs_acl_chmod().
Reported-by: Pawel Zawora <pzawora@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Pawel Zawora <pzawora@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c90039d59a6a4c8e675f44974a8d4affd4a55d8c
Author: Kees Cook <kees.cook@canonical.com>
Date: Thu Oct 7 10:03:48 2010 +0000
net: clear heap allocation for ETHTOOL_GRXCLSRLALL
commit ae6df5f96a51818d6376da5307d773baeece4014 upstream.
Calling ETHTOOL_GRXCLSRLALL with a large rule_cnt will allocate kernel
heap without clearing it. For the one driver (niu) that implements it,
it will leave the unused portion of heap unchanged and copy the full
contents back to userspace.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit cedb14039c279adef0b250a636da323ac904f1df
Author: Samuel Ortiz <samuel@sortiz.org>
Date: Wed Oct 6 01:03:12 2010 +0200
irda: Fix heap memory corruption in iriap.c
commit 37f9fc452d138dfc4da2ee1ce5ae85094efc3606 upstream.
While parsing the GetValuebyClass command frame, we could potentially write
passed the skb->data pointer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a2014bf8aa1568b2a4e77a1ed38370f8c80cb89d
Author: Samuel Ortiz <samuel@sortiz.org>
Date: Mon Oct 11 01:17:56 2010 +0200
irda: Fix parameter extraction stack overflow
commit efc463eb508798da4243625b08c7396462cabf9f upstream.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3b8bd6c1f25dcff1b83bb7873e9eb8bee47e0483
Author: Jens Axboe <jaxboe@fusionio.com>
Date: Fri Oct 29 08:10:18 2010 -0600
block: check for proper length of iov entries in blk_rq_map_user_iov()
commit 9284bcf4e335e5f18a8bc7b26461c33ab60d0689 upstream.
Ensure that we pass down properly validated iov segments before
calling into the mapping or copy functions.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b82a78188b15bf15da8279a6022504122abf39fd
Author: Jens Axboe <jaxboe@fusionio.com>
Date: Fri Oct 29 11:31:42 2010 -0600
block: take care not to overflow when calculating total iov length
commit 9f864c80913467312c7b8690e41fb5ebd1b50e92 upstream.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a39d84dc4380145211331849f12f8af781fb6c83
Author: Jens Axboe <jaxboe@fusionio.com>
Date: Fri Oct 29 11:46:56 2010 -0600
block: limit vec count in bio_kmalloc() and bio_alloc_map_data()
commit f3f63c1c28bc861a931fac283b5bc3585efb8967 upstream.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 43e069893c8749d04924e12cd81ce10c583ae6be
Author: Martin K. Petersen <martin.petersen@oracle.com>
Date: Wed Oct 13 21:18:03 2010 +0200
block: Ensure physical block size is unsigned int
commit 892b6f90db81cccb723d5d92f4fddc2d68b206e1 upstream.
Physical block size was declared unsigned int to accomodate the maximum
size reported by READ CAPACITY(16). Make sure we use the right type in
the related functions.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 63676c6866f8d4711a44968c8247f59fdae1e287
Author: Mike Christie <michaelc@cs.wisc.edu>
Date: Wed Oct 6 03:10:59 2010 -0500
Fix regressions in scsi_internal_device_block
commit 986fe6c7f50974e871b8ab5a800f5310ea25b361 upstream.
Deleting a SCSI device on a blocked fc_remote_port (before
fast_io_fail_tmo fires) results in a hanging thread:
STACK:
0 schedule+1108 [0x5cac48]
1 schedule_timeout+528 [0x5cb7fc]
2 wait_for_common+266 [0x5ca6be]
3 blk_execute_rq+160 [0x354054]
4 scsi_execute+324 [0x3b7ef4]
5 scsi_execute_req+162 [0x3b80ca]
6 sd_sync_cache+138 [0x3cf662]
7 sd_shutdown+138 [0x3cf91a]
8 sd_remove+112 [0x3cfe4c]
9 __device_release_driver+124 [0x3a08b8]
10 device_release_driver+60 [0x3a0a5c]
11 bus_remove_device+266 [0x39fa76]
12 device_del+340 [0x39d818]
13 __scsi_remove_device+204 [0x3bcc48]
14 scsi_remove_device+66 [0x3bcc8e]
15 sysfs_schedule_callback_work+50 [0x260d66]
16 worker_thread+622 [0x162326]
17 kthread+160 [0x1680b0]
18 kernel_thread_starter+6 [0x10aaea]
During the delete, the SCSI device is in moved to SDEV_CANCEL. When
the FC transport class later calls scsi_target_unblock, this has no
effect, since scsi_internal_device_unblock ignores SCSI devics in this
state.
It looks like all these are regressions caused by:
5c10e63c943b4c67561ddc6bf61e01d4141f881f
[SCSI] limit state transitions in scsi_internal_device_unblock
Fix by rejecting offline and cancel in the state transition.
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
[jejb: Original patch by Christof Schmitt, modified by Mike Christie]
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a66903bae9ce78bf61056b9b9c2741fcd9c000b7
Author: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Wed Oct 6 13:19:44 2010 +0200
Fix race when removing SCSI devices
commit 546ae796bfac6399e30da4b5af2cf7a6d0f8a4ec upstream.
Removing SCSI devices through
echo 1 > /sys/bus/scsi/devices/ ... /delete
while the FC transport class removes the SCSI target can lead to an
oops:
Unable to handle kernel pointer dereference at virtual kernel address 00000000b6815000
Oops: 0011 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: sunrpc qeth_l3 binfmt_misc dm_multipath scsi_dh dm_mod ipv6 qeth ccwgroup [last unloaded: scsi_wait_scan]
CPU: 1 Not tainted 2.6.35.5-45.x.20100924-s390xdefault #1
Process fc_wq_0 (pid: 861, task: 00000000b7331240, ksp: 00000000b735bac0)
Krnl PSW : 0704200180000000 00000000003ff6e4 (__scsi_remove_device+0x24/0xd0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
Krnl GPRS: 0000000000000001 0000000000000000 00000000b6815000 00000000bc24a8c0
00000000003ff7c8 000000000056dbb8 0000000000000002 0000000000835d80
ffffffff00000000 0000000000001000 00000000b6815000 00000000bc24a7f0
00000000b68151a0 00000000b6815000 00000000b735bc20 00000000b735bbf8
Krnl Code: 00000000003ff6d6: a7840001 brc 8,3ff6d8
00000000003ff6da: a7fbffd8 aghi %r15,-40
00000000003ff6de: e3e0f0980024 stg %r14,152(%r15)
>00000000003ff6e4: e31021200004 lg %r1,288(%r2)
00000000003ff6ea: a71f0000 cghi %r1,0
00000000003ff6ee: a7a40011 brc 10,3ff710
00000000003ff6f2: a7390003 lghi %r3,3
00000000003ff6f6: c0e5ffffc8b1 brasl %r14,3f8858
Call Trace:
([<0000000000001000>] 0x1000)
[<00000000003ff7d2>] scsi_remove_device+0x42/0x54
[<00000000003ff8ba>] __scsi_remove_target+0xca/0xfc
[<00000000003ff99a>] __remove_child+0x3a/0x48
[<00000000003e3246>] device_for_each_child+0x72/0xbc
[<00000000003ff93a>] scsi_remove_target+0x4e/0x74
[<0000000000406586>] fc_rport_final_delete+0xb2/0x23c
[<000000000015d080>] worker_thread+0x200/0x344
[<000000000016330c>] kthread+0xa0/0xa8
[<0000000000106c1a>] kernel_thread_starter+0x6/0xc
[<0000000000106c14>] kernel_thread_starter+0x0/0xc
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<00000000003ff7cc>] scsi_remove_device+0x3c/0x54
The function __scsi_remove_target iterates through the SCSI devices on
the host, but it drops the host_lock before calling
scsi_remove_device. When the SCSI device is deleted from another
thread, the pointer to the SCSI device in scsi_remove_device can
become invalid. Fix this by getting a reference to the SCSI device
before dropping the host_lock to keep the SCSI device alive for the
call to scsi_remove_device.
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 02a88fedb4923da2a99f83c351a2fcc2ffab9a2a
Author: Dan Carpenter <error27@gmail.com>
Date: Fri Oct 8 09:03:07 2010 +0200
gdth: integer overflow in ioctl
commit f63ae56e4e97fb12053590e41a4fa59e7daa74a4 upstream.
gdth_ioctl_alloc() takes the size variable as an int.
copy_from_user() takes the size variable as an unsigned long.
gen.data_len and gen.sense_len are unsigned longs.
On x86_64 longs are 64 bit and ints are 32 bit.
We could pass in a very large number and the allocation would truncate
the size to 32 bits and allocate a small buffer. Then when we do the
copy_from_user(), it would result in a memory corruption.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c960e1e3eafdf8b09b376dd15496c6447eee245d
Author: David Milburn <dmilburn@redhat.com>
Date: Fri Sep 3 17:13:03 2010 -0500
libsas: fix NCQ mixing with non-NCQ
commit f0ad30d3d2dc924decc0e10b1ff6dc32525a5d99 upstream.
Some cards (like mvsas) have issue troubles if non-NCQ commands are
mixed with NCQ ones. Fix this by using the libata default NCQ check
routine which waits until all NCQ commands are complete before issuing
a non-NCQ one. The impact to cards (like aic94xx) which don't need
this logic should be minimal
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f1c532c57f510a26886d8ee8650cfd1926e47b36
Author: Michael Reed <mdr@sgi.com>
Date: Mon Sep 20 11:20:22 2010 -0500
sd name space exhaustion causes system hang
commit 1a03ae0f556a931aa3747b70e44b78308f5b0590 upstream.
Following a site power outage which re-enabled all the ports on my FC
switches, my system subsequently booted with far too many luns! I had
let it run hoping it would make multi-user. It didn't. :( It hung solid
after exhausting the last sd device, sdzzz, and attempting to create sdaaaa
and beyond. I was unable to get a dump.
Discovered using a 2.6.32.13 based system.
correct this by detecting when the last index is utilized and failing
the sd probe of the device. Patch applies to scsi-misc-2.6.
Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3c2feffd253e2c9f27c6b4d5af377d5aa9ae9233
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Thu Oct 14 15:25:21 2010 -0400
USB: accept some invalid ep0-maxpacket values
commit 56626a72a47bf3e50875d960d6b5f17b9bee0ab2 upstream.
A few devices (such as the RCA VR5220 voice recorder) are so
non-compliant with the USB spec that they have invalid maxpacket sizes
for endpoint 0. Nevertheless, as long as we can safely use them, we
may as well do so.
This patch (as1432) softens our acceptance criterion by allowing
high-speed devices to have ep0-maxpacket sizes other than 64. A
warning is printed in the system log when this happens, and the
existing error message is clarified.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: James <bjlockie@lockie.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3812790e565781417cc93fc5486f7f7624bbdad1
Author: Alon Ziv <alon+git@nolaviz.org>
Date: Sun Oct 10 08:32:18 2010 +0200
USB: opticon: Fix long-standing bugs in opticon driver
commit 97cd8dc4ca9a1a5efb2cc38758e01492e3b013e2 upstream.
The bulk-read callback had two bugs:
a) The bulk-in packet's leading two zeros were returned (and the two last
bytes truncated)
b) The wrong URB was transmitted for the second (and later) read requests,
causing further reads to return the entire packet (including leading
zeros)
Signed-off-by: Alon Ziv <alon-git@nolaviz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4002f1cd2d58821fb269f1756a9aa109c5355fe0
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Thu Sep 30 15:16:23 2010 -0400
USB: disable endpoints after unbinding interfaces, not before
commit 80f0cf3947889014d3a3dc0ad60fb87cfda4b12a upstream.
This patch (as1430) fixes a bug in usbcore. When a device
configuration change occurs or a device is removed, the endpoints for
the old config should be completely disabled. However it turns out
they aren't; this is because usb_unbind_interface() calls
usb_enable_interface() or usb_set_interface() to put interfaces back
in altsetting 0, which re-enables the interfaces' endpoints.
As a result, when a device goes through a config change or is
unconfigured, the ep_in[] and ep_out[] arrays may be left holding old
pointers to usb_host_endpoint structures. If the device is
deauthorized these structures get freed, and the stale pointers cause
errors when the the device is eventually unplugged.
The solution is to disable the endpoints after unbinding the
interfaces instead of before. This isn't as large a change as it
sounds, since usb_unbind_interface() disables all the interface's
endpoints anyway before calling the driver's disconnect routine,
unless the driver claims to support "soft" unbind.
This fixes Bugzilla #19192. Thanks to "Tom" Lei Ming for diagnosing
the underlying cause of the problem.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Carsten Sommer <carsten_sommer@ymail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e87b55b054520085a5367585b7cd7d5b0684c649
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Mon Sep 20 18:31:07 2010 +0200
USB: atmel_usba_udc: force vbus_pin at -EINVAL when gpio_request failled
commit 969affff54702785330de553b790372e261e93f9 upstream.
to ensure gpio_is_valid return false
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit edcbf7a884544d364893699b3a04b8d8f8871b68
Author: Anders Larsen <al@alarsen.net>
Date: Wed Oct 6 23:46:25 2010 +0200
USB: cp210x: Add WAGO 750-923 Service Cable device ID
commit 93ad03d60b5b18897030038234aa2ebae8234748 upstream.
The WAGO 750-923 USB Service Cable is used for configuration and firmware
updates of several industrial automation products from WAGO Kontakttechnik GmbH.
Bus 004 Device 002: ID 1be3:07a6
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1be3
idProduct 0x07a6
bcdDevice 1.00
iManufacturer 1 Silicon Labs
iProduct 2 WAGO USB Service Cable
iSerial 3 1277796751
. . .
Signed-off-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f621a8720db433836973abf1259807c2918b3724
Author: DJ Delorie <dj@delorie.com>
Date: Fri Sep 17 11:09:06 2010 -0400
USB: cp210x: Add Renesas RX-Stick device ID
commit 2f1136d1d08a63dcdbcd462621373f30d8dfe590 upstream.
RX610 development board by Renesas
Bus 001 Device 024: ID 045b:0053 Hitachi, Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x045b Hitachi, Ltd
idProduct 0x0053
bcdDevice 1.00
iManufacturer 1 Silicon Labs
iProduct 2 RX-Stick
iSerial 3 0001
. . .
http://am.renesas.com/rx610stick
Signed-off-by: DJ Delorie <dj@delorie.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 994881281d3c4d36e747064f8e6d132ae85cb848
Author: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun Sep 12 11:41:50 2010 -0300
USB: option: Add more ZTE modem USB id's
commit ecfa153ef616b901e86d9a051b329fcda7a6ce7b upstream.
There are lots of ZTE USB id's currently not covered by usb/serial. Adds them,
to allow those devices to work properly on Linux.
While here, put the USB ID's for 0x2002/0x2003 at the sorted order.
This patch is based on zte.c file found on MF645.
PS.: The ZTE driver is commenting the USB ID for 0x0053. It also adds, commented,
an USB ID for 0x0026.
Not sure why, but I think that 0053 is used by their devices in storage mode only.
So, I opted to keep the comment on this patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit d5ecedd26ef34071322434d53fa2f900aa1d87bd
Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Wed Sep 29 09:54:31 2010 +0300
usb: musb: blackfin: call gpio_free() on error path in musb_platform_init()
commit 00be545e49d83485d49a598d3b7e090088934be8 upstream.
Blackfin's musb_platform_init() needs to call gpio_free() for error cleanup iff
otg_get_transceiver() call returns NULL.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fdae8723f974ef235711568c0581384bbc17245b
Author: Daniel Suchy <danny@danysek.cz>
Date: Tue Oct 12 15:44:24 2010 +0200
USB: ftdi_sio: new VID/PIDs for various Papouch devices
commit 59c6ccd9f9aecfa59c99ceba6d4d34b180547a05 upstream.
This patch for FTDI USB serial driver ads new VID/PIDs used on various
devices manufactured by Papouch (http://www.papouch.com). These devices
have their own VID/PID, although they're using standard FTDI chip. In
ftdi_sio.c, I also made small cleanup to have declarations for all
Papouch devices together.
Signed-off-by: Daniel Suchy <danny@danysek.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1a6ece17d81ef58bc8e1685f5903ac0a31ae2768
Author: Rainer Keller <mail@rainerkeller.de>
Date: Tue Sep 28 12:27:43 2010 +0200
USB: add PID for FTDI based OpenDCC hardware
commit 99c1e4f89d1033444ce4d0c064bd2826e81c3775 upstream.
The OpenDCC project is developing a new hardware. This patch adds its
PID to the list of known FTDI devices. The PID can be found at
http://www.opendcc.de/elektronik/usb/opendcc_usb.html
Signed-off-by: Rainer Keller <mail@rainerkeller.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 28d963f504c62c5b5da25ec3411540c82966114f
Author: Julia Lawall <julia@diku.dk>
Date: Fri Oct 15 15:00:06 2010 +0200
drivers/net/wireless/p54/eeprom.c: Return -ENOMEM on memory allocation failure
commit 0d91f22b75347d9503b17a42b6c74d3f7750acd6 upstream.
In this code, 0 is returned on memory allocation failure, even though other
failures return -ENOMEM or other similar values.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ret;
expression x,e1,e2,e3;
@@
ret = 0
... when != ret = e1
*x = \(kmalloc\|kcalloc\|kzalloc\)(...)
... when != ret = e2
if (x == NULL) { ... when != ret = e3
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1d60e5b3695461f708440473de9e7bd1137d9ec1
Author: Christian Lamparter <chunkeey@googlemail.com>
Date: Fri Oct 1 22:01:24 2010 +0200
p54usb: add five more USBIDs
commit 1a92795dac419128eb511dce30a6aad672064b88 upstream.
Source:
http://www.wikidevi.com/wiki/Intersil/p54/usb/windows
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 52415acdc04c4aa4ec6713001bcaffb79a33d9fb
Author: Christian Lamparter <chunkeey@googlemail.com>
Date: Sun Aug 22 22:41:33 2010 +0200
p54usb: fix off-by-one on !CONFIG_PM
commit 11791a6f7534906b4a01ffb54ba0b02ca39398ef upstream.
The ISL3887 chip needs a USB reset, whenever the
usb-frontend module "p54usb" is reloaded.
This patch fixes an off-by-one bug, if the user
is running a kernel without the CONFIG_PM option
set and for some reason (e.g.: compat-wireless)
wants to switch between different p54usb modules.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b96f78245da8bcb4eea3eee851de67aff2708cdf
Author: Nicolas Kaiser <nikai@nikai.net>
Date: Thu Oct 21 14:56:00 2010 +0200
pipe: fix failure to return error code on ->confirm()
commit e5953cbdff26f7cbae7eff30cd9b18c4e19b7594 upstream.
The arguments were transposed, we want to assign the error code to
'ret', which is being returned.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 910a36c7e4bc6bac32c6c7c0a7f08208f5bfaaa5
Author: Cliff Wickman <cpw@sgi.com>
Date: Wed Sep 8 10:14:27 2010 -0500
x86, kdump: Change copy_oldmem_page() to use cached addressing
commit 37a2f9f30a360fb03522d15c85c78265ccd80287 upstream.
The copy of /proc/vmcore to a user buffer proceeds much faster
if the kernel addresses memory as cached.
With this patch we have seen an increase in transfer rate from
less than 15MB/s to 80-460MB/s, depending on size of the
transfer. This makes a big difference in time needed to save a
system dump.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: kexec@lists.infradead.org
LKML-Reference: <E1OtMLz-0001yp-Ia@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 37d4d10815a27b22ca1a64b1e2bf6ab6fc127749
Author: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Fri Aug 27 11:09:48 2010 -0700
x86, intr-remap: Set redirection hint in the IRTE
commit 75e3cfbed6f71a8f151dc6e413b6ce3c390030cb upstream.
Currently the redirection hint in the interrupt-remapping table entry
is set to 0, which means the remapped interrupt is directed to the
processors listed in the destination. So in logical flat mode
in the presence of intr-remapping, this results in a single
interrupt multi-casted to multiple cpu's as specified by the destination
bit mask. But what we really want is to send that interrupt to one of the cpus
based on the lowest priority delivery mode.
Set the redirection hint in the IRTE to '1' to indicate that we want
the remapped interrupt to be directed to only one of the processors
listed in the destination.
This fixes the issue of same interrupt getting delivered to multiple cpu's
in the logical flat mode in the presence of interrupt-remapping. While
there is no functional issue observed with this behavior, this will
impact performance of such configurations (<=8 cpu's using logical flat
mode in the presence of interrupt-remapping)
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100827181049.013051492@sbsiddha-MOBL3.sc.intel.com>
Cc: Weidong Han <weidong.han@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 33f71188e94dcd34cacc8fd9e4e7a9bcf15d4eb8
Author: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu Sep 30 14:32:35 2010 +0200
x86, mtrr: Assume SYS_CFG[Tom2ForceMemTypeWB] exists on all future AMD CPUs
commit 3fdbf004c1706480a7c7fac3c9d836fa6df20d7d upstream.
Instead of adapting the CPU family check in amd_special_default_mtrr()
for each new CPU family assume that all new AMD CPUs support the
necessary bits in SYS_CFG MSR.
Tom2Enabled is architectural (defined in APM Vol.2).
Tom2ForceMemTypeWB is defined in all BKDGs starting with K8 NPT.
In pre K8-NPT BKDG this bit is reserved (read as zero).
W/o this adaption Linux would unnecessarily complain about bad MTRR
settings on every new AMD CPU family, e.g.
[ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 4863MB of RAM.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100930123235.GB20545@loge.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f7ccf80244281eb78192832d075c989788f5f62f
Author: Paul Fox <pgf@laptop.org>
Date: Fri Oct 1 18:17:19 2010 +0100
x86, olpc: Don't retry EC commands forever
commit 286e5b97eb22baab9d9a41ca76c6b933a484252c upstream.
Avoids a potential infinite loop.
It was observed once, during an EC hacking/debugging
session - not in regular operation.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: dilinger@queued.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 566707d3db2f92e74c25e8f948ced035d6756f7e
Author: Alok Kataria <akataria@vmware.com>
Date: Mon Oct 11 14:37:08 2010 -0700
x86, kexec: Make sure to stop all CPUs before exiting the kernel
commit 76fac077db6b34e2c6383a7b4f3f4f7b7d06d8ce upstream.
x86 smp_ops now has a new op, stop_other_cpus which takes a parameter
"wait" this allows the caller to specify if it wants to stop until all
the cpus have processed the stop IPI. This is required specifically
for the kexec case where we should wait for all the cpus to be stopped
before starting the new kernel. We now wait for the cpus to stop in
all cases except for panic/kdump where we expect things to be broken
and we are doing our best to make things work anyway.
This patch fixes a legitimate regression, which was introduced during
2.6.30, by commit id 4ef702c10b5df18ab04921fc252c26421d4d6c75.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
LKML-Reference: <1286833028.1372.20.camel@ank32.eng.vmware.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c68924b5a8894fe8e30221ded2a7eebd5835a437
Author: Andre Przywara <andre.przywara@amd.com>
Date: Mon Sep 6 15:14:17 2010 +0200
x86, cpu: Fix renamed, not-yet-shipping AMD CPUID feature bit
commit 7ef8aa72ab176e0288f363d1247079732c5d5792 upstream.
The AMD SSE5 feature set as-it has been replaced by some extensions
to the AVX instruction set. Thus the bit formerly advertised as SSE5
is re-used for one of these extensions (XOP).
Although this changes the /proc/cpuinfo output, it is not user visible, as
there are no CPUs (yet) having this feature.
To avoid confusion this should be added to the stable series, too.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
LKML-Reference: <1283778860-26843-2-git-send-email-andre.przywara@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1928814fabf0662556cd28f248b3c1069a2c3383
Author: Cliff Wickman <cpw@sgi.com>
Date: Thu Sep 16 11:44:02 2010 -0500
mm, x86: Saving vmcore with non-lazy freeing of vmas
commit 3ee48b6af49cf534ca2f481ecc484b156a41451d upstream.
During the reading of /proc/vmcore the kernel is doing
ioremap()/iounmap() repeatedly. And the buildup of un-flushed
vm_area_struct's is causing a great deal of overhead. (rb_next()
is chewing up most of that time).
This solution is to provide function set_iounmap_nonlazy(). It
causes a subsequent call to iounmap() to immediately purge the
vma area (with try_purge_vmap_area_lazy()).
With this patch we have seen the time for writing a 250MB
compressed dump drop from 71 seconds to 44 seconds.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: kexec@lists.infradead.org
LKML-Reference: <E1OwHZ4-0005WK-Tw@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 94e7c8dcd91617fa426ef140c55d9c6496359b92
Author: Darren Hart <dvhart@linux.intel.com>
Date: Sun Oct 17 08:35:04 2010 -0700
futex: Fix errors in nested key ref-counting
commit 7ada876a8703f23befbb20a7465a702ee39b1704 upstream.
futex_wait() is leaking key references due to futex_wait_setup()
acquiring an additional reference via the queue_lock() routine. The
nested key ref-counting has been masking bugs and complicating code
analysis. queue_lock() is only called with a previously ref-counted
key, so remove the additional ref-counting from the queue_(un)lock()
functions.
Also futex_wait_requeue_pi() drops one key reference too many in
unqueue_me_pi(). Remove the key reference handling from
unqueue_me_pi(). This was paired with a queue_lock() in
futex_lock_pi(), so the count remains unchanged.
Document remaining nested key ref-counting sites.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Reported-and-tested-by: Matthieu Fertré<matthieu.fertre@kerlabs.com>
Reported-by: Louis Rilling<louis.rilling@kerlabs.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <4CBB17A8.70401@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c5d70fb75393ca814b90fa088ba42cb6ac4fff69
Author: Alan Cox <alan@linux.intel.com>
Date: Fri Oct 22 14:11:26 2010 +0100
bluetooth: Fix missing NULL check
commit c19483cc5e56ac5e22dd19cf25ba210ab1537773 upstream.
Fortunately this is only exploitable on very unusual hardware.
[Reported a while ago but nothing happened so just fixing it]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7d6f5dbe923973537d25b07ae67bca552341cdf3
Author: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Date: Mon Sep 13 17:47:00 2010 -0400
sched: Fix string comparison in /proc/sched_features
commit 7740191cd909b75d75685fb08a5d1f54b8a9d28b upstream.
Fix incorrect handling of the following case:
INTERACTIVE
INTERACTIVE_SOMETHING_ELSE
The comparison only checks up to each element's length.
Changelog since v1:
- Embellish using some Rostedtisms.
[ mingo: ^^ == smaller and cleaner ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Lindgren <tony@atomide.com>
LKML-Reference: <20100913214700.GB16118@Krystal>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8e1eb27c298533705a1561d4ea4dec31e80407b2
Author: Vasiliy Kulikov <segooon@gmail.com>
Date: Sun Oct 17 18:41:24 2010 +0400
pcmcia: synclink_cs: fix information leak to userland
commit 5b917a1420d3d1a9c8da49fb0090692dc9aaee86 upstream.
Structure new_line is copied to userland with some padding fields unitialized.
It leads to leaking of stack memory.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 824737ff1ea5a699b7122862e2698bbf14bc601c
Author: Paul Mackerras <paulus@samba.org>
Date: Thu Sep 9 19:02:40 2010 +0000
powerpc/perf: Fix sampling enable for PPC970
commit 9f5f9ffe50e90ed73040d2100db8bfc341cee352 upstream.
The logic to distinguish marked instruction events from ordinary events
on PPC970 and derivatives was flawed. The result is that instruction
sampling didn't get enabled in the PMU for some marked instruction
events, so they would never trigger. This fixes it by adding the
appropriate break statements in the switch statement.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3260b7324aa40b49b4aff1d7f170613bb81551e3
Author: Max Vozeler <mvz@vozeler.com>
Date: Tue Sep 21 17:43:30 2010 +0200
staging: usbip: Process event flags without delay
commit 584c5b7cf06194464240280483ee0376cdddbbae upstream.
The way the event handler works can cause it to delay
events until eventual wakeup for another event.
For example, on device detach (vhci):
- Write to sysfs detach file
-> usbip_event_add(VDEV_EVENT_DOWN)
-> wakeup()
#define VDEV_EVENT_DOWN (USBIP_EH_SHUTDOWN | USBIP_EH_RESET).
- Event thread wakes up and passes the event to
event_handler() to process.
- It processes and clears the USBIP_EH_SHUTDOWN
flag then returns.
- The outer event loop (event_handler_loop()) calls
wait_event_interruptible().
The processing of the second flag which is part of
VDEV_EVENT_DOWN (USBIP_EH_RESET) did not happen yet.
It is delayed until the next event.
This means the ->reset callback may not happen for
a long time (if ever), leaving the usbip port in a
weird state which prevents its reuse.
This patch changes the handler to process all flags
before waiting for another wakeup.
I have verified this change to fix a problem which
prevented reattach of a usbip device. It also helps
for socket errors which missed the RESET as well.
The delayed event processing also affects the stub
side of usbip and the error handling there.
Signed-off-by: Max Vozeler <mvz@vozeler.com>
Reported-by: Marco Lancione <marco@optikam.com>
Tested-by: Luc Jalbert <ljalbert@optikam.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ffd428f2fff8a30e1202e09a73c5436cbc562d06
Author: Max Vozeler <mvz@vozeler.com>
Date: Tue Sep 21 17:31:40 2010 +0200
staging: usbip: Notify usb core of port status changes
commit 0c9a32f0192e656daa2ff3c9149f6d71b4a1b873 upstream.
This patch changes vhci to behave like dummy and
other hcds when disconnecting a device.
Previously detaching a device from the root hub
did not notify the usb core of the disconnect and
left the device visible.
Signed-off-by: Max Vozeler <mvz@vozeler.com>
Reported-by: Marco Lancione <marco@optikam.com>
Tested-by: Luc Jalbert <ljalbert@optikam.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 39666accd74d34684fd97f92c41ce8c26da93584
Author: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri May 14 22:08:58 2010 -0500
ssb: Handle alternate SSPROM location
commit 9d1ac34ec3a67713308ae0883c3359c557f14d17 upstream.
In kernel Bugzilla #15825 (2 users), in a wireless mailing list thread
(http://lists.infradead.org/pipermail/b43-dev/2010-May/000124.html), and on a
netbook owned by John Linville
(http://marc.info/?l=linux-wireless&m=127230751408818&w=4), there are reports
of ssb failing to detect an SPROM at the normal location. After studying the
MMIO trace dump for the Broadcom wl driver, it was determined that the affected
boxes had a relocated SPROM.
This patch fixes all systems that have reported this problem.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ab8504259739d876befc79252e73d8017cc28db7
Author: Christoph Fritz <chf.fritz@googlemail.com>
Date: Fri May 28 10:45:59 2010 +0200
ssb: fix NULL ptr deref when pcihost_wrapper is used
commit da1fdb02d9200ff28b6f3a380d21930335fe5429 upstream.
Ethernet driver b44 does register ssb by it's pcihost_wrapper
and doesn't set ssb_chipcommon. A check on this value
introduced with commit d53cdbb94a52a920d5420ed64d986c3523a56743
and ea2db495f92ad2cf3301623e60cb95b4062bc484 triggers:
BUG: unable to handle kernel NULL pointer dereference at 00000010
IP: [<c1266c36>] ssb_is_sprom_available+0x16/0x30
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3385fd807f064c6a526af75ad9c0f82ea307aa52
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Wed Mar 31 21:59:21 2010 +0200
ssb: Look for SPROM at different offset on higher rev CC
commit ea2db495f92ad2cf3301623e60cb95b4062bc484 upstream.
Our offset handling becomes even a little more hackish now. For some reason I
do not understand all offsets as inrelative. It assumes base offset is 0x1000
but it will work for now as we make offsets relative anyway by removing base
0x1000. Should be cleaner however.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b748b7161ec6b8d6d9505917514ea543a186381f
Author: John W. Linville <linville@tuxdriver.com>
Date: Wed Mar 31 21:39:35 2010 +0200
ssb: do not read SPROM if it does not exist
commit d53cdbb94a52a920d5420ed64d986c3523a56743 upstream.
Attempting to read registers that don't exist on the SSB bus can cause
hangs on some boxes. At least some b43 devices are 'in the wild' that
don't have SPROMs at all. When the SSB bus support loads, it attempts
to read these (non-existant) SPROMs and causes hard hangs on the box --
no console output, etc.
This patch adds some intelligence to determine whether or not the SPROM
is present before attempting to read it. This avoids those hard hangs
on those devices with no SPROM attached to their SSB bus. The
SSB-attached devices (e.g. b43, et al.) won't work, but at least the box
will survive to test further patches. :-)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit c954f13da265f08c380bcac25981b430d61ab52f
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri Aug 6 10:22:56 2010 -0700
Revert "ssb: Handle Netbook devices where the SPROM address is changed"
Turns out this isn't the best way to resolve this issue. The
individual patches will be applied instead.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 213a00cc8577fa34295cea260bc9818667784432
Author: Hugh Dickins <hughd@google.com>
Date: Tue Aug 24 22:44:12 2010 -0700
x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampoline
commit b7d460897739e02f186425b7276e3fdb1595cea7 upstream.
rc2 kernel crashes when booting second cpu on this CONFIG_VMSPLIT_2G_OPT
laptop: whereas cloning from kernel to low mappings pgd range does need
to limit by both KERNEL_PGD_PTRS and KERNEL_PGD_BOUNDARY, cloning kernel
pgd range itself must not be limited by the smaller KERNEL_PGD_BOUNDARY.
Signed-off-by: Hugh Dickins <hughd@google.com>
LKML-Reference: <alpine.LSU.2.00.1008242235120.2515@sister.anvils>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1edd44f1d53900dfc7c7737eee19849d5d5373d4
Author: H. Peter Anvin <hpa@zytor.com>
Date: Wed Aug 18 11:42:23 2010 -0700
x86-32: Fix dummy trampoline-related inline stubs
commit 8848a91068c018bc91f597038a0f41462a0f88a4 upstream.
Fix dummy inline stubs for trampoline-related functions when no
trampolines exist (until we get rid of the no-trampoline case
entirely.)
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <4C6C294D.3030404@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 5b48d8480bad7420846b372e4eff9f3c0966d925
Author: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon Aug 16 14:38:33 2010 +0200
x86-32: Separate 1:1 pagetables from swapper_pg_dir
commit fd89a137924e0710078c3ae855e7cec1c43cb845 upstream.
This patch fixes machine crashes which occur when heavily exercising the
CPU hotplug codepaths on a 32-bit kernel. These crashes are caused by
AMD Erratum 383 and result in a fatal machine check exception. Here's
the scenario:
1. On 32-bit, the swapper_pg_dir page table is used as the initial page
table for booting a secondary CPU.
2. To make this work, swapper_pg_dir needs a direct mapping of physical
memory in it (the low mappings). By adding those low, large page (2M)
mappings (PAE kernel), we create the necessary conditions for Erratum
383 to occur.
3. Other CPUs which do not participate in the off- and onlining game may
use swapper_pg_dir while the low mappings are present (when leave_mm is
called). For all steps below, the CPU referred to is a CPU that is using
swapper_pg_dir, and not the CPU which is being onlined.
4. The presence of the low mappings in swapper_pg_dir can result
in TLB entries for addresses below __PAGE_OFFSET to be established
speculatively. These TLB entries are marked global and large.
5. When the CPU with such TLB entry switches to another page table, this
TLB entry remains because it is global.
6. The process then generates an access to an address covered by the
above TLB entry but there is a permission mismatch - the TLB entry
covers a large global page not accessible to userspace.
7. Due to this permission mismatch a new 4kb, user TLB entry gets
established. Further, Erratum 383 provides for a small window of time
where both TLB entries are present. This results in an uncorrectable
machine check exception signalling a TLB multimatch which panics the
machine.
There are two ways to fix this issue:
1. Always do a global TLB flush when a new cr3 is loaded and the
old page table was swapper_pg_dir. I consider this a hack hard
to understand and with performance implications
2. Do not use swapper_pg_dir to boot secondary CPUs like 64-bit
does.
This patch implements solution 2. It introduces a trampoline_pg_dir
which has the same layout as swapper_pg_dir with low_mappings. This page
table is used as the initial page table of the booting CPU. Later in the
bringup process, it switches to swapper_pg_dir and does a global TLB
flush. This fixes the crashes in our test cases.
-v2: switch to swapper_pg_dir right after entering start_secondary() so
that we are able to access percpu data which might not be mapped in the
trampoline page table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20100816123833.GB28147@aftab>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit fe6595caaea6d84fd1290df4dfe762235bd7662b
Author: Roland McGrath <roland@redhat.com>
Date: Tue Sep 7 19:37:06 2010 -0700
execve: make responsive to SIGKILL with large arguments
commit 9aea5a65aa7a1af9a4236dfaeb0088f1624f9919 upstream.
An execve with a very large total of argument/environment strings
can take a really long time in the execve system call. It runs
uninterruptibly to count and copy all the strings. This change
makes it abort the exec quickly if sent a SIGKILL.
Note that this is the conservative change, to interrupt only for
SIGKILL, by using fatal_signal_pending(). It would be perfectly
correct semantics to let any signal interrupt the string-copying in
execve, i.e. use signal_pending() instead of fatal_signal_pending().
We'll save that change for later, since it could have user-visible
consequences, such as having a timer set too quickly make it so that
an execve can never complete, though it always happened to work before.
Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit 43bcb928c27f7a0fc53b95fac85354ee73b6cd1b
Author: Roland McGrath <roland@redhat.com>
Date: Tue Sep 7 19:36:28 2010 -0700
execve: improve interactivity with large arguments
commit 7993bc1f4663c0db67bb8f0d98e6678145b387cd upstream.
This adds a preemption point during the copying of the argument and
environment strings for execve, in copy_strings(). There is already
a preemption point in the count() loop, so this doesn't add any new
points in the abstract sense.
When the total argument+environment strings are very large, the time
spent copying them can be much more than a normal user time slice.
So this change improves the interactivity of the rest of the system
when one process is doing an execve with very large arguments.
Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b48366b5f84c8a52dca99b241c444793ec6dd771
Author: Roland McGrath <roland@redhat.com>
Date: Tue Sep 7 19:35:49 2010 -0700
setup_arg_pages: diagnose excessive argument size
commit 1b528181b2ffa14721fb28ad1bd539fe1732c583 upstream.
The CONFIG_STACK_GROWSDOWN variant of setup_arg_pages() does not
check the size of the argument/environment area on the stack.
When it is unworkably large, shift_arg_pages() hits its BUG_ON.
This is exploitable with a very large RLIMIT_STACK limit, to
create a crash pretty easily.
Check that the initial stack is not too large to make it possible
to map in any executable. We're not checking that the actual
executable (or intepreter, for binfmt_elf) will fit. So those
mappings might clobber part of the initial stack mapping. But
that is just userland lossage that userland made happen, not a
kernel problem.
Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 670bcc4109282d6e9c8b1774cf507296e156dd41
Author: Jacob Pan <jacob.jun.pan@linux.intel.com>
Date: Wed May 19 12:01:23 2010 -0700
x86: detect scattered cpuid features earlier
commit 1dedefd1a066a795a87afca9c0236e1a94de9bf6 upstream.
Some extra CPU features such as ARAT is needed in early boot so
that x86_init function pointers can be set up properly.
http://lkml.org/lkml/2010/5/18/519
At start_kernel() level, this patch moves init_scattered_cpuid_features()
from check_bugs() to setup_arch() -> early_cpu_init() which is earlier than
platform specific x86_init layer setup. Suggested by HPA.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1274295685-6774-2-git-send-email-jacob.jun.pan@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f115819a79eb3a8a39aadcf6f0de0e8ee3a94f65
Author: Zhang Rui <rui.zhang@intel.com>
Date: Tue Sep 28 22:48:55 2010 -0400
ACPI: Disable Windows Vista compatibility for Toshiba P305D
commit 337279ce3aa85d81d34c0f837d1c204df105103b upstream.
Disable the Windows Vista (SP1) compatibility for Toshiba P305D.
http://bugzilla.kernel.org/show_bug.cgi?id=14736
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f664e4a32dc900c8845de24672bbcde93bcb9771
Author: Len Brown <len.brown@intel.com>
Date: Tue Sep 28 17:51:51 2010 -0400
ACPI: EC: add Vista incompatibility DMI entry for Toshiba Satellite L355
commit 7a1d602f5fc35d14907b7da98d5627acb69589d1 upstream.
https://bugzilla.kernel.org/show_bug.cgi?id=12641
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 05f7676dc3559c2b9061fda4e44c085a8d32fb05
Author: Len Brown <len.brown@intel.com>
Date: Fri Sep 24 21:02:27 2010 -0400
intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang
commit 4731fdcf6f7bdab3e369a3f844d4ea4d4017284d upstream.
When the Lenovo Ideapad S10-3 is booted with HT enabled,
it hits a boot hang in the intel_idle driver.
This occurs when entering ATM-C4 for the first time,
unless BM_STS is first cleared.
acpi_idle doesn't see this because it first checks
and clears BM_STS, but it would hit the same hang
if that check were disabled.
http://bugs.meego.com/show_bug.cgi?id=7093
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/634702
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 91b3824071a9dc7ca4bb8c41bda045e223837564
Author: Colin Ian King <colin.king@canonical.com>
Date: Mon Aug 2 15:14:43 2010 +0000
ACPI: enable repeated PCIEXP wakeup by clearing PCIEXP_WAKE_STS on resume
commit 573b638158029898caf9470c8214b7ddd29751e3 upstream.
Section 4.7.3.1.1 (PM1 Status Registers) of version 4.0 of
the ACPI spec concerning PCIEXP_WAKE_STS points out in
in the final note field in table 4-11 that if this bit is
set to 1 and the system is put into a sleeping state then
the system will not automatically wake.
This bit gets set by hardware to indicate that the system
woke up due to a PCI Express wakeup event, so clear it during
acpi_hw_clear_acpi_status() calls to enable subsequent
resumes to work.
BugLink: http://bugs.launchpad.net/bugs/613381
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 469bc41db02a457a5661c9f47760e6ac94cc91dd
Author: Paul Fertser <fercerpav@gmail.com>
Date: Mon Oct 11 15:45:35 2010 -0700
b44: fix carrier detection on bind
commit bcf64aa379fcadd074449cbf0c049da70071b06f upstream.
For carrier detection to work properly when binding the driver with a cable
unplugged, netif_carrier_off() should be called after register_netdev(),
not before.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b19dda10c483c0a4fa02310653a441e413b98397
Author: Ben Hutchings <ben@decadent.org.uk>
Date: Fri Oct 15 04:36:53 2010 +0100
r6040: Fix multicast list iteration when hash filter is used
This was fixed in mainline by the interface change made in commit
f9dcbcc9e338d08c0f7de7eba4eaafbbb7f81249.
After walking the multicast list to set up the hash filter, this
function will walk off the end of the list when filling the
exact-match entries. This was fixed in mainline by the interface
change made in commit f9dcbcc9e338d08c0f7de7eba4eaafbbb7f81249.
Reported-by: spamalot@hispeed.ch
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=15355
Reported-by: Jason Heeris <jason.heeris@gmail.com>
Reference: http://bugs.debian.org/600155
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8a194c449871648f25c56ec050e6948d19a7d78a
Author: Florian Fainelli <florian@openwrt.org>
Date: Wed Apr 7 16:50:58 2010 -0700
r6040: fix r6040_multicast_list
commit 3bcf8229a8c49769e48d3e0bd1e20d8e003f8106 upstream.
As reported in <https://bugzilla.kernel.org/show_bug.cgi?id=15355>, r6040_
multicast_list currently crashes. This is due a wrong maximum of multicast
entries. This patch fixes the following issues with multicast:
- number of maximum entries if off-by-one (4 instead of 3)
- the writing of the hash table index is not necessary and leads to invalid
values being written into the MCR1 register, so the MAC is simply put in a non
coherent state
- when we exceed the maximum number of mutlticast address, writing the
broadcast address should be done in registers MID_1{L,M,H} instead of
MID_O{L,M,H}, otherwise we would loose the adapter's MAC address
[bwh: Adjust for 2.6.32; should also apply to 2.6.27]
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 95e6f3cf39fc0d337c0f792af92a3347ceba3a3d
Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri Sep 17 00:46:42 2010 +0900
bsg: fix incorrect device_status value
commit 478971600e47cb83ff2d3c63c5c24f2b04b0d6a1 upstream.
bsg incorrectly returns sg's masked_status value for device_status.
[jejb: fix up expression logic]
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7ee72472c6fe2994c9195fb3da665aa4ec1d9928
Author: Ulrich Weber <uweber@astaro.com>
Date: Tue Oct 5 13:46:19 2010 +0200
xfrm4: strip ECN and IP Precedence bits in policy lookup
[ Upstream commit 94e2238969e89f5112297ad2a00103089dde7e8f ]
dont compare ECN and IP Precedence bits in find_bundle
and use ECN bit stripped TOS value in xfrm_lookup
Signed-off-by: Ulrich Weber <uweber@astaro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a9108eedb9f2831904f9cb1250aabd4e3413fb02
Author: Tom Marshall <tdm.code@gmail.com>
Date: Mon Sep 20 15:42:05 2010 -0700
tcp: Fix race in tcp_poll
[ Upstream commit a4d258036ed9b2a1811c3670c6099203a0f284a0 ]
If a RST comes in immediately after checking sk->sk_err, tcp_poll will
return POLLIN but not POLLOUT. Fix this by checking sk->sk_err at the end
of tcp_poll. Additionally, ensure the correct order of operations on SMP
machines with memory barriers.
Signed-off-by: Tom Marshall <tdm.code@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bb9ec4584b3afa1ab0a9b8d6060fe08a3290ea4d
Author: David S. Miller <davem@davemloft.net>
Date: Mon Sep 27 20:24:54 2010 -0700
tcp: Fix >4GB writes on 64-bit.
[ Upstream commit 01db403cf99f739f86903314a489fb420e0e254f ]
Fixes kernel bugzilla #16603
tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write
zero bytes, for example.
There is also the problem higher up of how verify_iovec() works. It
wants to prevent the total length from looking like an error return
value.
However it does this using 'int', but syscalls return 'long' (and
thus signed 64-bit on 64-bit machines). So it could trigger
false-positives on 64-bit as written. So fix it to use 'long'.
Reported-by: Olaf Bonorden <bono@onlinehome.de>
Reported-by: Daniel Büse <dbuese@gmx.de>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ab274fcfec82a91a6232ac71d620b62beb80ef78
Author: David S. Miller <davem@davemloft.net>
Date: Mon Sep 20 15:40:35 2010 -0700
rose: Fix signedness issues wrt. digi count.
[ Upstream commit 9828e6e6e3f19efcb476c567b9999891d051f52f ]
Just use explicit casts, since we really can't change the
types of structures exported to userspace which have been
around for 15 years or so.
Reported-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit f6d37e73dcf0ba416ccf98fb4edc84509d097a1c
Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Date: Mon Sep 27 23:10:42 2010 +0000
Phonet: Correct header retrieval after pskb_may_pull
[ Upstream commit a91e7d471e2e384035b9746ea707ccdcd353f5dd ]
Retrieve the header after doing pskb_may_pull since, pskb_may_pull
could change the buffer structure.
This is based on the comment given by Eric Dumazet on Phonet
Pipe controller patch for a similar problem.
Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 40bb77169fefe5826d4f54fcc9c40a4fc22bf3e9
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date: Tue Sep 21 13:04:04 2010 -0700
netxen: dont set skb->truesize
[ Upstream commit 7e96dc7045bff8758804b047c0dfb6868f182500 ]
skb->truesize is set in core network.
Dont change it unless dealing with fragments.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1b592fd2ff0e08720e671afada80c753f7d8b202
Author: Nagendra Tomar <tomer_iisc@yahoo.com>
Date: Sat Oct 2 23:45:06 2010 +0000
net: Fix the condition passed to sk_wait_event()
[ Upstream commit 482964e56e1320cb7952faa1932d8ecf59c4bf75 ]
This patch fixes the condition (3rd arg) passed to sk_wait_event() in
sk_stream_wait_memory(). The incorrect check in sk_stream_wait_memory()
causes the following soft lockup in tcp_sendmsg() when the global tcp
memory pool has exhausted.
>>> snip <<<
localhost kernel: BUG: soft lockup - CPU#3 stuck for 11s! [sshd:6429]
localhost kernel: CPU 3:
localhost kernel: RIP: 0010:[sk_stream_wait_memory+0xcd/0x200] [sk_stream_wait_memory+0xcd/0x200] sk_stream_wait_memory+0xcd/0x200
localhost kernel:
localhost kernel: Call Trace:
localhost kernel: [sk_stream_wait_memory+0x1b1/0x200] sk_stream_wait_memory+0x1b1/0x200
localhost kernel: [<ffffffff802557c0>] autoremove_wake_function+0x0/0x40
localhost kernel: [ipv6:tcp_sendmsg+0x6e6/0xe90] tcp_sendmsg+0x6e6/0xce0
localhost kernel: [sock_aio_write+0x126/0x140] sock_aio_write+0x126/0x140
localhost kernel: [xfs:do_sync_write+0xf1/0x130] do_sync_write+0xf1/0x130
localhost kernel: [<ffffffff802557c0>] autoremove_wake_function+0x0/0x40
localhost kernel: [hrtimer_start+0xe3/0x170] hrtimer_start+0xe3/0x170
localhost kernel: [vfs_write+0x185/0x190] vfs_write+0x185/0x190
localhost kernel: [sys_write+0x50/0x90] sys_write+0x50/0x90
localhost kernel: [system_call+0x7e/0x83] system_call+0x7e/0x83
>>> snip <<<
What is happening is, that the sk_wait_event() condition passed from
sk_stream_wait_memory() evaluates to true for the case of tcp global memory
exhaustion. This is because both sk_stream_memory_free() and vm_wait are true
which causes sk_wait_event() to *not* call schedule_timeout().
Hence sk_stream_wait_memory() returns immediately to the caller w/o sleeping.
This causes the caller to again try allocation, which again fails and again
calls sk_stream_wait_memory(), and so on.
[ Bug introduced by commit c1cbe4b7ad0bc4b1d98ea708a3fecb7362aa4088
("[NET]: Avoid atomic xchg() for non-error case") -DaveM ]
Signed-off-by: Nagendra Singh Tomar <tomer_iisc@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 76eabea8a1b3384087c908499c206b72b9cf92d0
Author: Maciej Żenczykowski <maze@google.com>
Date: Sun Oct 3 14:49:00 2010 -0700
net: Fix IPv6 PMTU disc. w/ asymmetric routes
[ Upstream commit ae878ae280bea286ff2b1e1cb6e609dd8cb4501d ]
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 487a1f7338ff740bde0d15f97c44b7b8029cc9c7
Author: Kees Cook <kees.cook@canonical.com>
Date: Mon Oct 11 12:23:25 2010 -0700
net: clear heap allocations for privileged ethtool actions
[ Upstream commit b00916b189d13a615ff05c9242201135992fcda3 ]
Several other ethtool functions leave heap uncleared (potentially) by
drivers. Some interfaces appear safe (eeprom, etc), in that the sizes
are well controlled. In some situations (e.g. unchecked error conditions),
the heap will remain unchanged in areas before copying back to userspace.
Note that these are less of an issue since these all require CAP_NET_ADMIN.
Cc: stable@kernel.org
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 217e4b61e6b5e14f950b5353ba261d9cd8142186
Author: Jianzhao Wang <jianzhao.wang@6wind.com>
Date: Wed Sep 8 14:35:43 2010 -0700
net: blackhole route should always be recalculated
[ Upstream commit ae2688d59b5f861dc70a091d003773975d2ae7fb ]
Blackhole routes are used when xfrm_lookup() returns -EREMOTE (error
triggered by IKE for example), hence this kind of route is always
temporary and so we should check if a better route exists for next
packets.
Bug has been introduced by commit d11a4dc18bf41719c9f0d7ed494d295dd2973b92.
Signed-off-by: Jianzhao Wang <jianzhao.wang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 107ed4220f8884e3ac026636dfc19c45b8fc990a
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date: Tue Sep 21 08:47:45 2010 +0000
ip: fix truesize mismatch in ip fragmentation
[ Upstream commit 3d13008e7345fa7a79d8f6438150dc15d6ba6e9d ]
Special care should be taken when slow path is hit in ip_fragment() :
When walking through frags, we transfert truesize ownership from skb to
frags. Then if we hit a slow_path condition, we must undo this or risk
uncharging frags->truesize twice, and in the end, having negative socket
sk_wmem_alloc counter, or even freeing socket sooner than expected.
Many thanks to Nick Bowler, who provided a very clean bug report and
test program.
Thanks to Jarek for reviewing my first patch and providing a V2
While Nick bisection pointed to commit 2b85a34e911 (net: No more
expensive sock_hold()/sock_put() on each tx), underlying bug is older
(2.6.12-rc5)
A side effect is to extend work done in commit b2722b1c3a893e
(ip_fragment: also adjust skb->truesize for packets not owned by a
socket) to ipv6 as well.
Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Jarek Poplawski <jarkao2@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b4ae8715e06c5e10bb6f86bd3085e5c3236ed81e
Author: Dave Airlie <airlied@redhat.com>
Date: Sat Sep 25 17:45:50 2010 +1000
drm/radeon: fix PCI ID 5657 to be an RV410
commit f459ffbdfd04edb4a8ce6eea33170eb057a5e695 upstream.
fixes https://bugzilla.kernel.org/show_bug.cgi?id=19012
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 68a10eccaf635730f524e56f1eb49fb1f819968e
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri Oct 15 11:09:28 2010 -0700
De-pessimize rds_page_copy_user
commit 799c10559d60f159ab2232203f222f18fa3c4a5f upstream.
Don't try to "optimize" rds_page_copy_user() by using kmap_atomic() and
the unsafe atomic user mode accessor functions. It's actually slower
than the straightforward code on any reasonable modern CPU.
Back when the code was written (although probably not by the time it was
actually merged, though), 32-bit x86 may have been the dominant
architecture. And there kmap_atomic() can be a lot faster than kmap()
(unless you have very good locality, in which case the virtual address
caching by kmap() can overcome all the downsides).
But these days, x86-64 may not be more populous, but it's getting there
(and if you care about performance, it's definitely already there -
you'd have upgraded your CPU's already in the last few years). And on
x86-64, the non-kmap_atomic() version is faster, simply because the code
is simpler and doesn't have the "re-try page fault" case.
People with old hardware are not likely to care about RDS anyway, and
the optimization for the 32-bit case is simply buggy, since it doesn't
verify the user addresses properly.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 4a0dc321316356feb2613ac57df087aebdb2ddc7
Author: Borislav Petkov <borislav.petkov@amd.com>
Date: Fri Oct 8 12:08:34 2010 +0200
x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order
commit 6dcbfe4f0b4e17e289d56fa534b7ce5a6b7f63a3 upstream.
This fixes possible cases of not collecting valid error info in
the MCE error thresholding groups on F10h hardware.
The current code contains a subtle problem of checking only the
Valid bit of MSR0000_0413 (which is MC4_MISC0 - DRAM
thresholding group) in its first iteration and breaking out if
the bit is cleared.
But (!), this MSR contains an offset value, BlkPtr[31:24], which
points to the remaining MSRs in this thresholding group which
might contain valid information too. But if we bail out only
after we checked the valid bit in the first MSR and not the
block pointer too, we miss that other information.
The thing is, MC4_MISC0[BlkPtr] is not predicated on
MCi_STATUS[MiscV] or MC4_MISC0[Valid] and should be checked
prior to iterating over the MCI_MISCj thresholding group,
irrespective of the MC4_MISC0[Valid] setting.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1e103c2da78c3e946c72910f98f6b38268705be8
Author: Yinghai Lu <yinghai@kernel.org>
Date: Sun Oct 10 19:52:15 2010 -0700
x86, numa: For each node, register the memory blocks actually used
commit 73cf624d029d776a33d0a80c695485b3f9b36231 upstream.
Russ reported SGI UV is broken recently. He said:
| The SRAT table shows that memory range is spread over two nodes.
|
| SRAT: Node 0 PXM 0 100000000-800000000
| SRAT: Node 1 PXM 1 800000000-1000000000
| SRAT: Node 0 PXM 0 1000000000-1080000000
|
|Previously, the kernel early_node_map[] would show three entries
|with the proper node.
|
|[ 0.000000] 0: 0x00100000 -> 0x00800000
|[ 0.000000] 1: 0x00800000 -> 0x01000000
|[ 0.000000] 0: 0x01000000 -> 0x01080000
|
|The problem is recent community kernel early_node_map[] shows
|only two entries with the node 0 entry overlapping the node 1
|entry.
|
| 0: 0x00100000 -> 0x01080000
| 1: 0x00800000 -> 0x01000000
After looking at the changelog, Found out that it has been broken for a while by
following commit
|commit 8716273caef7f55f39fe4fc6c69c5f9f197f41f1
|Author: David Rientjes <rientjes@google.com>
|Date: Fri Sep 25 15:20:04 2009 -0700
|
| x86: Export srat physical topology
Before that commit, register_active_regions() is called for every SRAT memory
entry right away.
Use nodememblk_range[] instead of nodes[] in order to make sure we
capture the actual memory blocks registered with each node. nodes[]
contains an extended range which spans all memory regions associated
with a node, but that does not mean that all the memory in between are
included.
Reported-by: Russ Anderson <rja@sgi.com>
Tested-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB27BDF.5000800@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3220aa132790e798b2ebb3b43aa6545d25f24b8e
Author: Luca Tettamanti <kronos.it@gmail.com>
Date: Wed Sep 22 10:41:58 2010 +0000
atl1: fix resume
commit ec5a32f67c603b11d68eb283d94eb89a4f6cfce1 upstream.
adapter->cmb.cmb is initialized when the device is opened and freed when
it's closed. Accessing it unconditionally during resume results either
in a crash (NULL pointer dereference, when the interface has not been
opened yet) or data corruption (when the interface has been used and
brought down adapter->cmb.cmb points to a deallocated memory area).
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Acked-by: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 99d1bac7375639ceb89e20f5a56b000a2fbf434b
Author: Johannes Berg <johannes.berg@intel.com>
Date: Fri Sep 17 00:38:25 2010 +0200
wext: fix potential private ioctl memory content leak
commit df6d02300f7c2fbd0fbe626d819c8e5237d72c62 upstream.
When a driver doesn't fill the entire buffer, old
heap contents may remain, and if it also doesn't
update the length properly, this old heap content
will be copied back to userspace.
It is very unlikely that this happens in any of
the drivers using private ioctls since it would
show up as junk being reported by iwpriv, but it
seems better to be safe here, so use kzalloc.
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 027e59fe6262fc24b38b5a734029e5289bb0b9f6
Author: Joel Becker <joel.becker@oracle.com>
Date: Wed Sep 29 17:33:05 2010 -0700
ocfs2: Don't walk off the end of fast symlinks.
commit 1fc8a117865b54590acd773a55fbac9221b018f0 upstream.
ocfs2 fast symlinks are NUL terminated strings stored inline in the
inode data area. However, disk corruption or a local attacker could, in
theory, remove that NUL. Because we're using strlen() (my fault,
introduced in a731d1 when removing vfs_follow_link()), we could walk off
the end of that string.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 98d4499fbe16dd02e3846b2a05c07490e8aeeb33
Author: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu Sep 30 15:15:38 2010 -0700
reiserfs: fix unwanted reiserfs lock recursion
commit 9d8117e72bf453dd9d85e0cd322ce4a0f8bccbc0 upstream.
Prevent from recursively locking the reiserfs lock in reiserfs_unpack()
because we may call journal_begin() that requires the lock to be taken
only once, otherwise it won't be able to release the lock while taking
other mutexes, ending up in inverted dependencies between the journal
mutex and the reiserfs lock for example.
This fixes:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.35.4.4a #3
-------------------------------------------------------
lilo/1620 is trying to acquire lock:
(&journal->j_mutex){+.+...}, at: [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]
but task is already holding lock:
(&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&REISERFS_SB(s)->lock){+.+.+.}:
[<c10562b7>] lock_acquire+0x67/0x80
[<c12facad>] __mutex_lock_common+0x4d/0x410
[<c12fb0c8>] mutex_lock_nested+0x18/0x20
[<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]
[<d0325c06>] do_journal_begin_r+0x86/0x340 [reiserfs]
[<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
[<d0315be4>] reiserfs_remount+0x224/0x530 [reiserfs]
[<c10b6a20>] do_remount_sb+0x60/0x110
[<c10cee25>] do_mount+0x625/0x790
[<c10cf014>] sys_mount+0x84/0xb0
[<c12fca3d>] syscall_call+0x7/0xb
-> #0 (&journal->j_mutex){+.+...}:
[<c10560f6>] __lock_acquire+0x1026/0x1180
[<c10562b7>] lock_acquire+0x67/0x80
[<c12facad>] __mutex_lock_common+0x4d/0x410
[<c12fb0c8>] mutex_lock_nested+0x18/0x20
[<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]
[<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
[<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs]
[<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs]
[<c10db9db>] __block_prepare_write+0x1bb/0x3a0
[<c10dbbe6>] block_prepare_write+0x26/0x40
[<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs]
[<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs]
[<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs]
[<c10c3188>] vfs_ioctl+0x28/0xa0
[<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0
[<c10c3eb3>] sys_ioctl+0x63/0x70
[<c12fca3d>] syscall_call+0x7/0xb
other info that might help us debug this:
2 locks held by lilo/1620:
#0: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d032945a>] reiserfs_unpack+0x6a/0x120 [reiserfs]
#1: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]
stack backtrace:
Pid: 1620, comm: lilo Not tainted 2.6.35.4.4a #3
Call Trace:
[<c10560f6>] __lock_acquire+0x1026/0x1180
[<c10562b7>] lock_acquire+0x67/0x80
[<c12facad>] __mutex_lock_common+0x4d/0x410
[<c12fb0c8>] mutex_lock_nested+0x18/0x20
[<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]
[<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
[<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs]
[<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs]
[<c10db9db>] __block_prepare_write+0x1bb/0x3a0
[<c10dbbe6>] block_prepare_write+0x26/0x40
[<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs]
[<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs]
[<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs]
[<c10c3188>] vfs_ioctl+0x28/0xa0
[<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0
[<c10c3eb3>] sys_ioctl+0x63/0x70
[<c12fca3d>] syscall_call+0x7/0xb
Reported-by: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 34f63f1b1791a97ab6d90de421c4091341a02cb4
Author: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu Sep 30 15:15:37 2010 -0700
reiserfs: fix dependency inversion between inode and reiserfs mutexes
commit 3f259d092c7a2fdf217823e8f1838530adb0cdb0 upstream.
The reiserfs mutex already depends on the inode mutex, so we can't lock
the inode mutex in reiserfs_unpack() without using the safe locking API,
because reiserfs_unpack() is always called with the reiserfs mutex locked.
This fixes:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.35c #13
-------------------------------------------------------
lilo/1606 is trying to acquire lock:
(&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]
but task is already holding lock:
(&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&REISERFS_SB(s)->lock){+.+.+.}:
[<c1056347>] lock_acquire+0x67/0x80
[<c12f083d>] __mutex_lock_common+0x4d/0x410
[<c12f0c58>] mutex_lock_nested+0x18/0x20
[<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]
[<d0329e9a>] reiserfs_lookup_privroot+0x2a/0x90 [reiserfs]
[<d0316b81>] reiserfs_fill_super+0x941/0xe60 [reiserfs]
[<c10b7d17>] get_sb_bdev+0x117/0x170
[<d0313e21>] get_super_block+0x21/0x30 [reiserfs]
[<c10b74ba>] vfs_kern_mount+0x6a/0x1b0
[<c10b7659>] do_kern_mount+0x39/0xe0
[<c10cebe0>] do_mount+0x340/0x790
[<c10cf0b4>] sys_mount+0x84/0xb0
[<c12f25cd>] syscall_call+0x7/0xb
-> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}:
[<c1056186>] __lock_acquire+0x1026/0x1180
[<c1056347>] lock_acquire+0x67/0x80
[<c12f083d>] __mutex_lock_common+0x4d/0x410
[<c12f0c58>] mutex_lock_nested+0x18/0x20
[<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]
[<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs]
[<c10c3228>] vfs_ioctl+0x28/0xa0
[<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0
[<c10c3f53>] sys_ioctl+0x63/0x70
[<c12f25cd>] syscall_call+0x7/0xb
other info that might help us debug this:
1 lock held by lilo/1606:
#0: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]
stack backtrace:
Pid: 1606, comm: lilo Not tainted 2.6.35c #13
Call Trace:
[<c1056186>] __lock_acquire+0x1026/0x1180
[<c1056347>] lock_acquire+0x67/0x80
[<c12f083d>] __mutex_lock_common+0x4d/0x410
[<c12f0c58>] mutex_lock_nested+0x18/0x20
[<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]
[<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs]
[<c10c3228>] vfs_ioctl+0x28/0xa0
[<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0
[<c10c3f53>] sys_ioctl+0x63/0x70
[<c12f25cd>] syscall_call+0x7/0xb
Reported-by: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 40086df2f497219b5fe9039a6518f61739c5ce58
Author: Salman Qazi <sqazi@google.com>
Date: Tue Oct 12 07:25:19 2010 -0700
hrtimer: Preserve timer state in remove_hrtimer()
commit f13d4f979c518119bba5439dd2364d76d31dcd3f upstream.
The race is described as follows:
CPU X CPU Y
remove_hrtimer
// state & QUEUED == 0
timer->state = CALLBACK
unlock timer base
timer->f(n) //very long
hrtimer_start
lock timer base
remove_hrtimer // no effect
hrtimer_enqueue
timer->state = CALLBACK |
QUEUED
unlock timer base
hrtimer_start
lock timer base
remove_hrtimer
mode = INACTIVE
// CALLBACK bit lost!
switch_hrtimer_base
CALLBACK bit not set:
timer->base
changes to a
different CPU.
lock this CPU's timer base
The bug was introduced with commit ca109491f (hrtimer: removing all ur
callback modes) in 2.6.29
[ tglx: Feed new state via local variable and add a comment. ]
Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: akpm@linux-foundation.org
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101012142351.8485.21823.stgit@dungbeetle.mtv.corp.google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 518fcb0dc96dc4d16df66a768edcf0e2d844364d
Author: Simon Guinot <sguinot@lacie.com>
Date: Fri Sep 17 23:33:51 2010 +0200
dmaengine: fix interrupt clearing for mv_xor
commit cc60f8878eab892c03d06b10f389232b9b66bd83 upstream.
When using simultaneously the two DMA channels on a same engine, some
transfers are never completed. For example, an endless lock can occur
while writing heavily on a RAID5 array (with async-tx offload support
enabled).
Note that this issue can also be reproduced by using the DMA test
client.
On a same engine, the interrupt cause register is shared between two
DMA channels. This patch make sure that the cause bit is only cleared
for the requested channel.
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Tested-by: Luc Saillard <luc@saillard.org>
Acked-by: saeed bishara <saeed.bishara@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit aa9600084478249072bc5a40449b967d8c4466f8
Author: Steven Rostedt <srostedt@redhat.com>
Date: Tue Oct 12 12:06:43 2010 -0400
ring-buffer: Fix typo of time extends per page
commit d01343244abdedd18303d0323b518ed9cdcb1988 upstream.
Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.
Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.
This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.
When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).
There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.
The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:
# cd /sys/kernel/debug/tracing/
# echo function > current_tracer
# echo 'common_pid < 0' > events/ftrace/function/filter
# echo > trace
# echo 1 > trace_marker
# sleep 120
# cat trace
Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.
This patch fixes the typo and prevents the false positive of that warning.
Reported-by: Hans J. Koch <hjk@linutronix.de>
Tested-by: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a56f2b573a488d3d7a1a41e50711347862fa1f83
Author: Tejun Heo <tj@kernel.org>
Date: Fri Oct 15 12:56:21 2010 +0200
ubd: fix incorrect sector handling during request restart
commit 47526903feb52f4c26a6350370bdf74e337fcdb1 upstream.
Commit f81f2f7c (ubd: drop unnecessary rq->sector manipulation)
dropped request->sector manipulation in preparation for global request
handling cleanup; unfortunately, it incorrectly assumed that the
updated sector wasn't being used.
ubd tries to issue as many requests as possible to io_thread. When
issuing fails due to memory pressure or other reasons, the device is
put on the restart list and issuing stops. On IO completion, devices
on the restart list are scanned and IO issuing is restarted.
ubd issues IOs sg-by-sg and issuing can be stopped in the middle of a
request, so each device on the restart queue needs to remember where
to restart in its current request. ubd needs to keep track of the
issue position itself because,
* blk_rq_pos(req) is now updated by the block layer to keep track of
_completion_ position.
* Multiple io_req's for the current request may be in flight, so it's
difficult to tell where blk_rq_pos(req) currently is.
Add ubd->rq_pos to keep track of the issue position and use it to
correctly restart io_req issue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Tested-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8b6487c4d921d5e4dc061209364222c9848deae5
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Tue Sep 28 20:57:19 2010 +0200
x86, irq: Plug memory leak in sparse irq
commit 1cf180c94e9166cda083ff65333883ab3648e852 upstream.
free_irq_cfg() is not freeing the cpumask_vars in irq_cfg. Fixing this
triggers a use after free caused by the fact that copying struct
irq_cfg is done with memcpy, which copies the pointer not the cpumask.
Fix both places.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <alpine.LFD.2.00.1009282052570.2416@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 79f991c4c845efef76a5481bb0e040915e972d0e
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Tue Sep 28 23:20:23 2010 +0200
x86, hpet: Fix bogus error check in hpet_assign_irq()
commit 021989622810b02aab4b24f91e1f5ada2b654579 upstream.
create_irq() returns -1 if the interrupt allocation failed, but the
code checks for irq == 0.
Use create_irq_nr() instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <alpine.LFD.2.00.1009282310360.2416@localhost6.localdomain6>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 3f10d217f3744132e9f896d7d4b5cedf7ee2e821
Author: Johannes Berg <johannes.berg@intel.com>
Date: Fri Sep 24 11:20:47 2010 +0200
mac80211: fix use-after-free
commit cd87a2d3a33d75a646f1aa1aa2ee5bf712d6f963 upstream.
commit 8c0c709eea5cbab97fb464cd68b06f24acc58ee1
Author: Johannes Berg <johannes@sipsolutions.net>
Date: Wed Nov 25 17:46:15 2009 +0100
mac80211: move cmntr flag out of rx flags
moved the CMTR flag into the skb's status, and
in doing so introduced a use-after-free -- when
the skb has been handed to cooked monitors the
status setting will touch now invalid memory.
Additionally, moving it there has effectively
discarded the optimisation -- since the bit is
only ever set on freed SKBs, and those were a
copy, it could never be checked.
For the current release, fixing this properly
is a bit too involved, so let's just remove the
problematic code and leave userspace with one
copy of each frame for each virtual interface.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 2ac21c50ae99b349fff21b8c49d12b3867752f4b
Author: Kenneth Waters <kwwaters@gmail.com>
Date: Tue Sep 21 00:58:23 2010 -0700
Input: joydev - fix JSIOCSAXMAP ioctl
commit d2520a426dc3033c00077e923a553fc6c98c7564 upstream.
Fixed JSIOCSAXMAP ioctl to update absmap, the map from hardware axis to
event axis in addition to abspam. This fixes a regression introduced
by 999b874f.
Signed-off-by: Kenneth Waters <kwwaters@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b73a9cba501f233a005392d971208033c6fbef0d
Author: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat Sep 11 11:37:51 2010 -0300
V4L/DVB: cx231xx: Avoid an OOPS when card is unknown (card=0)
commit c10469c637602c2385e2993d8c730cc44fd47d23 upstream.
As reported by: Carlos Americo Domiciano <c_domiciano@yahoo.com.br>:
[ 220.033500] cx231xx v4l2 driver loaded.
[ 220.033571] cx231xx #0: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 6 interfaces
[ 220.033577] cx231xx #0: registering interface 0
[ 220.033591] cx231xx #0: registering interface 1
[ 220.033654] cx231xx #0: registering interface 6
[ 220.033910] cx231xx #0: Identified as Unknown CX231xx video grabber (card=0)
[ 220.033946] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 220.033955] IP: [<ffffffffa0d3c8bd>] cx231xx_pre_card_setup+0x5d/0xb0 [cx231xx]
Thanks-to: Carlos Americo Domiciano <c_domiciano@yahoo.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit ef40b724e656c3e7dd46b7b57f1f735baf4cd074
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri Oct 15 11:12:38 2010 -0700
v4l1: fix 32-bit compat microcode loading translation
commit 3e645d6b485446c54c6745c5e2cf5c528fe4deec upstream.
The compat code for the VIDIOCSMICROCODE ioctl is totally buggered.
It's only used by the VIDEO_STRADIS driver, and that one is scheduled to
staging and eventually removed unless somebody steps up to maintain it
(at which point it should use request_firmware() rather than some magic
ioctl). So we'll get rid of it eventually.
But in the meantime, the compatibility ioctl code is broken, and this
tries to get it to at least limp along (even if Mauro suggested just
deleting it entirely, which may be the right thing to do - I don't think
the compatibility translation code has ever worked unless you were very
lucky).
Reported-by: Kees Cook <kees.cook@canonical.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit db0500894559756a53aefe16ec3319529d69f050
Author: Steven Rostedt <srostedt@redhat.com>
Date: Wed Sep 22 22:22:25 2010 -0400
tracing/x86: Don't use mcount in kvmclock.c
commit 258af47479980d8238a04568b94a4e55aa1cb537 upstream.
The guest can use the paravirt clock in kvmclock.c which is used
by sched_clock(), which in turn is used by the tracing mechanism
for timestamps, which leads to infinite recursion.
Disable mcount/tracing for kvmclock.o.
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 908d3f38fb48a812de839258b391bd6f7092ffb4
Author: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed Sep 22 17:07:27 2010 -0700
tracing/x86: Don't use mcount in pvclock.c
commit 9ecd4e1689208afe9b059a5ce1333acb2f42c4d2 upstream.
When using a paravirt clock, pvclock.c can be used by sched_clock(),
which in turn is used by the tracing mechanism for timestamps,
which leads to infinite recursion.
Disable mcount/tracing for pvclock.o.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
LKML-Reference: <4C9A9A3F.4040201@goop.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit a255b2005130c1e313461166a25b98956b2d6ef9
Author: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu Sep 23 15:15:19 2010 +0200
x86/amd-iommu: Work around S3 BIOS bug
commit 4c894f47bb49284008073d351c0ddaac8860864e upstream.
This patch adds a workaround for an IOMMU BIOS problem to
the AMD IOMMU driver. The result of the bug is that the
IOMMU does not execute commands anymore when the system
comes out of the S3 state resulting in system failure. The
bug in the BIOS is that is does not restore certain hardware
specific registers correctly. This workaround reads out the
contents of these registers at boot time and restores them
on resume from S3. The workaround is limited to the specific
IOMMU chipset where this problem occurs.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 1ce5058b79eb16d2b3de69141353a8c0192a9729
Author: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu Sep 23 16:12:48 2010 +0200
x86/amd-iommu: Fix rounding-bug in __unmap_single
commit 04e0463e088b41060c08c255eb0d3278a504f094 upstream.
In the __unmap_single function the dma_addr is rounded down
to a page boundary before the dma pages are unmapped. The
address is later also used to flush the TLB entries for that
mapping. But without the offset into the dma page the amount
of pages to flush might be miscalculated in the TLB flushing
path. This patch fixes this bug by using the original
address to flush the TLB.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 43b0a24bedb7474ae1546e860db57a515e1fda49
Author: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon Sep 20 14:33:07 2010 +0200
x86/amd-iommu: Set iommu configuration flags in enable-loop
commit e9bf51971157e367aabfc111a8219db010f69cd4 upstream.
This patch moves the setting of the configuration and
feature flags out out the acpi table parsing path and moves
it into the iommu-enable path. This is needed to reliably
fix resume-from-s3.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 7f9d0491c3671118a29ab13523bec1ffb963feb8
Author: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Thu Sep 23 16:22:05 2010 +0200
mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove
commit 9320f7cbbdd5febf013b0e91db29189724057738 upstream.
If not all clocks have been defined in platform data, the driver will
cause a null pointer dereference when it is removed. This patch fixes
this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 6ee5c420acc062e2beaa8df205cfc73925e26f8e
Author: Steve Wise <swise@opengridcomputing.com>
Date: Sat Sep 18 19:38:21 2010 -0500
RDMA/cxgb3: Turn off RX coalescing for iWARP connections
commit bec658ff31453a5726b1c188674d587a5d40c482 upstream.
The HW by default has RX coalescing on. For iWARP connections, this
causes a 100ms delay in connection establishement due to the ingress
MPA Start message being stalled in HW. So explicitly turn RX
coalescing off when setting up iWARP connections.
This was causing very bad performance for NP64 gather operations using
Open MPI, due to the way it sets up connections on larger jobs.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 474a2b3bcead877bd50ac976c875af48c532864d
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Tue Sep 21 15:01:53 2010 -0400
USB: fix bug in initialization of interface minor numbers
commit 0026e00523a85b90a92a93ddf6660939ecef3e54 upstream.
Recent changes in the usbhid layer exposed a bug in usbcore. If
CONFIG_USB_DYNAMIC_MINORS is enabled then an interface may be assigned
a minor number of 0. However interfaces that aren't registered as USB
class devices also have their minor number set to 0, during
initialization. As a result usb_find_interface() may return the
wrong interface, leading to a crash.
This patch (as1418) fixes the problem by initializing every
interface's minor number to -1. It also cleans up the
usb_register_dev() function, which besides being somewhat awkwardly
written, does not unwind completely on all its error paths.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Philip J. Turmel <philip@turmel.org>
Tested-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Tested-by: Alex Riesen <raa.lkml@gmail.com>
Tested-by: Matthias Bayer <jackdachef@gmail.com>
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 9d55dc791385be8da4013a166f82db745c48e3dd
Author: Clemens Ladisch <clemens@ladisch.de>
Date: Fri Oct 15 12:06:18 2010 +0200
ALSA: rawmidi: fix oops (use after free) when unloading a driver module
commit aa73aec6c385e2c797ac25cc7ccf0318031de7c8 upstream.
When a driver module is unloaded and the last still open file is a raw
MIDI device, the card and its devices will be actually freed in the
snd_card_file_remove() call when that file is closed. Afterwards, rmidi
and rmidi->card point into freed memory, so the module pointer is likely
to be garbage.
(This was introduced by commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a.)
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-by: Krzysztof Foltman <wdev@foltman.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit b259026c5eb96fae5c3c3884a7da7fd13886267f
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Tue Sep 28 14:18:20 2010 -0400
ALSA: prevent heap corruption in snd_ctl_new()
commit 5591bf07225523600450edd9e6ad258bb877b779 upstream.
The snd_ctl_new() function in sound/core/control.c allocates space for a
snd_kcontrol struct by performing arithmetic operations on a
user-provided size without checking for integer overflow. If a user
provides a large enough size, an overflow will occur, the allocated
chunk will be too small, and a second user-influenced value will be
written repeatedly past the bounds of this chunk. This code is
reachable by unprivileged users who have permission to open
a /dev/snd/controlC* device (on many distros, this is group "audio") via
the SNDRV_CTL_IOCTL_ELEM_ADD and SNDRV_CTL_IOCTL_ELEM_REPLACE ioctls.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 64ba4c140e3a025b6e3bd4b303b22a7a02ed3f68
Author: Luke Yelavich <luke.yelavich@canonical.com>
Date: Tue Sep 21 17:05:46 2010 +1000
ALSA: hda - Add Dell Latitude E6400 model quirk
commit 0f9f1ee9d1412d45a22bfd69dfd4d4324b506e9e upstream.
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/643891
Set the Dell Latitude E6400 (1028:0233) SSID to use AD1984_DELL_DESKTOP
Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 980a96c276db63b160ce7923806ce75c626d10fa
Author: Erik J. Staab <ejs@insightbb.com>
Date: Wed Sep 22 11:07:41 2010 +0200
ALSA: oxygen: fix analog capture on Claro halo cards
commit 0873a5ae747847ee55a63db409dff3476e45bcd9 upstream.
On the HT-Omega Claro halo card, the ADC data must be captured from the
second I2S input. Using the default first input, which isn't connected
to anything, would result in silence.
Signed-off-by: Erik J. Staab <ejs@insightbb.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 8ecadb3f423ba4913d8c8ba6e98b3f78f271cc8f
Author: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Sat Sep 25 11:07:27 2010 -0400
ALSA: sound/pci/rme9652: prevent reading uninitialized stack memory
commit e68d3b316ab7b02a074edc4f770e6a746390cb7d upstream.
The SNDRV_HDSP_IOCTL_GET_CONFIG_INFO and
SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctls in hdspm.c and hdsp.c allow
unprivileged users to read uninitialized kernel stack memory, because
several fields of the hdsp{m}_config_info structs declared on the stack
are not altered or zeroed before being copied back to the user. This
patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit bfe4ecf769c30630b23a69c2441c6ab0a247ceaa
Author: H. Peter Anvin <hpa@linux.intel.com>
Date: Tue Sep 28 15:35:01 2010 -0700
x86, cpu: After uncapping CPUID, re-run CPU feature detection
commit d900329e20f4476db6461752accebcf7935a8055 upstream.
After uncapping the CPUID level, we need to also re-run the CPU
feature detection code.
This resolves kernel bugzilla 16322.
Reported-by: boris64 <bugzilla.kernel.org@boris64.net>
LKML-Reference: <tip-@git.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>