ChangeSet 1.977.29.10, 2003/04/02 12:01:21-08:00, greg@kroah.com
i2c: move i2c-proc to i2c-sensor and clean up all usages of it.
drivers/i2c/i2c-proc.c | 187 ----------------------
include/linux/i2c-proc.h | 373 --------------------------------------------
drivers/i2c/Kconfig | 11 -
drivers/i2c/Makefile | 2
drivers/i2c/chips/Kconfig | 13 +
drivers/i2c/chips/adm1021.c | 2
drivers/i2c/chips/lm75.c | 2
drivers/i2c/chips/via686a.c | 2
drivers/i2c/i2c-sensor.c | 182 +++++++++++++++++++++
include/linux/i2c-sensor.h | 373 ++++++++++++++++++++++++++++++++++++++++++++
10 files changed, 568 insertions(+), 579 deletions(-)
diff -Nru a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
--- a/drivers/i2c/Kconfig Wed Apr 2 16:00:46 2003
+++ b/drivers/i2c/Kconfig Wed Apr 2 16:00:46 2003
@@ -196,17 +196,6 @@
<file:Documentation/modules.txt>.
The module will be called i2c-dev.
-config I2C_PROC
- tristate "I2C /proc interface (required for hardware sensors)"
- depends on I2C && SYSCTL
- help
- This provides support for i2c device entries in the /proc filesystem.
- The entries will be found in /proc/sys/dev/sensors.
-
- This code is also available as a module. If you want to compile
- it as a module, say M here and read <file:Documentation/modules.txt>.
- The module will be called i2c-proc.
-
source drivers/i2c/busses/Kconfig
source drivers/i2c/chips/Kconfig
diff -Nru a/drivers/i2c/Makefile b/drivers/i2c/Makefile
--- a/drivers/i2c/Makefile Wed Apr 2 16:00:46 2003
+++ b/drivers/i2c/Makefile Wed Apr 2 16:00:46 2003
@@ -14,5 +14,5 @@
obj-$(CONFIG_ITE_I2C_ADAP) += i2c-adap-ite.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
-obj-$(CONFIG_I2C_PROC) += i2c-proc.o
+obj-$(CONFIG_I2C_SENSOR) += i2c-sensor.o
obj-y += busses/ chips/
diff -Nru a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
--- a/drivers/i2c/chips/Kconfig Wed Apr 2 16:00:46 2003
+++ b/drivers/i2c/chips/Kconfig Wed Apr 2 16:00:46 2003
@@ -1,13 +1,13 @@
#
# Sensor device configuration
-# All depend on EXPERIMENTAL, I2C and I2C_PROC.
+# All depend on EXPERIMENTAL and I2C
#
menu "I2C Hardware Sensors Chip support"
config SENSORS_ADM1021
tristate " Analog Devices ADM1021 and compatibles"
- depends on I2C && I2C_PROC
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
@@ -24,7 +24,7 @@
config SENSORS_LM75
tristate " National Semiconductors LM75 and compatibles"
- depends on I2C && I2C_PROC
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for National Semiconductor LM75
sensor chips and clones: Dallas Semi DS75 and DS1775, TelCon
@@ -39,7 +39,7 @@
config SENSORS_VIA686A
tristate " VIA686A"
- depends on I2C && I2C_PROC
+ depends on I2C && EXPERIMENTAL
help
support for via686a
If you say yes here you get support for the integrated sensors in
@@ -49,5 +49,10 @@
You will also need the latest user-space utilties: you can find them
in the lm_sensors package, which you can download at
http://www.lm-sensors.nu
+
+config I2C_SENSOR
+ tristate
+ depends on SENSORS_ADM1021 || SENSORS_LM75 || SENSORS_VIA686A
+ default m
endmenu
diff -Nru a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c
--- a/drivers/i2c/chips/adm1021.c Wed Apr 2 16:00:46 2003
+++ b/drivers/i2c/chips/adm1021.c Wed Apr 2 16:00:46 2003
@@ -23,7 +23,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-proc.h>
+#include <linux/i2c-sensor.h>
/* Registers */
diff -Nru a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c
--- a/drivers/i2c/chips/lm75.c Wed Apr 2 16:00:46 2003
+++ b/drivers/i2c/chips/lm75.c Wed Apr 2 16:00:46 2003
@@ -24,7 +24,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-proc.h>
+#include <linux/i2c-sensor.h>
/* Addresses to scan */
diff -Nru a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c
--- a/drivers/i2c/chips/via686a.c Wed Apr 2 16:00:46 2003
+++ b/drivers/i2c/chips/via686a.c Wed Apr 2 16:00:46 2003
@@ -36,7 +36,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/i2c-proc.h>
+#include <linux/i2c-sensor.h>
#include <linux/init.h>
#include <asm/io.h>
diff -Nru a/drivers/i2c/i2c-proc.c b/drivers/i2c/i2c-proc.c
--- a/drivers/i2c/i2c-proc.c Wed Apr 2 16:00:46 2003
+++ /dev/null Wed Dec 31 16:00:00 1969
@@ -1,187 +0,0 @@
-/*
- i2c-proc.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl> and
- Mark D. Studebaker <mdsxyz123@yahoo.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*
- This driver puts entries in /proc/sys/dev/sensors for each I2C device
-*/
-
-/* #define DEBUG 1 */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/ctype.h>
-#include <linux/sysctl.h>
-#include <linux/proc_fs.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/i2c.h>
-#include <linux/i2c-proc.h>
-#include <asm/uaccess.h>
-
-
-/* Very inefficient for ISA detects, and won't work for 10-bit addresses! */
-int i2c_detect(struct i2c_adapter *adapter,
- struct i2c_address_data *address_data,
- i2c_found_addr_proc * found_proc)
-{
- int addr, i, found, j, err;
- struct i2c_force_data *this_force;
- int is_isa = i2c_is_isa_adapter(adapter);
- int adapter_id =
- is_isa ? SENSORS_ISA_BUS : i2c_adapter_id(adapter);
-
- /* Forget it if we can't probe using SMBUS_QUICK */
- if ((!is_isa) &&
- !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK))
- return -1;
-
- for (addr = 0x00; addr <= (is_isa ? 0xffff : 0x7f); addr++) {
- /* XXX: WTF is going on here??? */
- if ((is_isa && check_region(addr, 1)) ||
- (!is_isa && i2c_check_addr(adapter, addr)))
- continue;
-
- /* If it is in one of the force entries, we don't do any
- detection at all */
- found = 0;
- for (i = 0; !found && (this_force = address_data->forces + i, this_force->force); i++) {
- for (j = 0; !found && (this_force->force[j] != SENSORS_I2C_END); j += 2) {
- if ( ((adapter_id == this_force->force[j]) ||
- ((this_force->force[j] == SENSORS_ANY_I2C_BUS) && !is_isa)) &&
- (addr == this_force->force[j + 1]) ) {
- dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n", adapter_id, addr);
- if ((err = found_proc(adapter, addr, this_force->kind)))
- return err;
- found = 1;
- }
- }
- }
- if (found)
- continue;
-
- /* If this address is in one of the ignores, we can forget about it
- right now */
- for (i = 0; !found && (address_data->ignore[i] != SENSORS_I2C_END); i += 2) {
- if ( ((adapter_id == address_data->ignore[i]) ||
- ((address_data->ignore[i] == SENSORS_ANY_I2C_BUS) &&
- !is_isa)) &&
- (addr == address_data->ignore[i + 1])) {
- dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, addr %04x\n", adapter_id, addr);
- found = 1;
- }
- }
- for (i = 0; !found && (address_data->ignore_range[i] != SENSORS_I2C_END); i += 3) {
- if ( ((adapter_id == address_data->ignore_range[i]) ||
- ((address_data-> ignore_range[i] == SENSORS_ANY_I2C_BUS) &
- !is_isa)) &&
- (addr >= address_data->ignore_range[i + 1]) &&
- (addr <= address_data->ignore_range[i + 2])) {
- dev_dbg(&adapter->dev, "found ignore_range parameter for adapter %d, addr %04x\n", adapter_id, addr);
- found = 1;
- }
- }
- if (found)
- continue;
-
- /* Now, we will do a detection, but only if it is in the normal or
- probe entries */
- if (is_isa) {
- for (i = 0; !found && (address_data->normal_isa[i] != SENSORS_ISA_END); i += 1) {
- if (addr == address_data->normal_isa[i]) {
- dev_dbg(&adapter->dev, "found normal isa entry for adapter %d, addr %04x\n", adapter_id, addr);
- found = 1;
- }
- }
- for (i = 0; !found && (address_data->normal_isa_range[i] != SENSORS_ISA_END); i += 3) {
- if ((addr >= address_data->normal_isa_range[i]) &&
- (addr <= address_data->normal_isa_range[i + 1]) &&
- ((addr - address_data->normal_isa_range[i]) % address_data->normal_isa_range[i + 2] == 0)) {
- dev_dbg(&adapter->dev, "found normal isa_range entry for adapter %d, addr %04x", adapter_id, addr);
- found = 1;
- }
- }
- } else {
- for (i = 0; !found && (address_data->normal_i2c[i] != SENSORS_I2C_END); i += 1) {
- if (addr == address_data->normal_i2c[i]) {
- found = 1;
- dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, addr %02x", adapter_id, addr);
- }
- }
- for (i = 0; !found && (address_data->normal_i2c_range[i] != SENSORS_I2C_END); i += 2) {
- if ((addr >= address_data->normal_i2c_range[i]) &&
- (addr <= address_data->normal_i2c_range[i + 1])) {
- dev_dbg(&adapter->dev, "found normal i2c_range entry for adapter %d, addr %04x\n", adapter_id, addr);
- found = 1;
- }
- }
- }
-
- for (i = 0;
- !found && (address_data->probe[i] != SENSORS_I2C_END);
- i += 2) {
- if (((adapter_id == address_data->probe[i]) ||
- ((address_data->
- probe[i] == SENSORS_ANY_I2C_BUS) & !is_isa))
- && (addr == address_data->probe[i + 1])) {
- dev_dbg(&adapter->dev, "found probe parameter for adapter %d, addr %04x\n", adapter_id, addr);
- found = 1;
- }
- }
- for (i = 0; !found && (address_data->probe_range[i] != SENSORS_I2C_END); i += 3) {
- if ( ((adapter_id == address_data->probe_range[i]) ||
- ((address_data->probe_range[i] == SENSORS_ANY_I2C_BUS) & !is_isa)) &&
- (addr >= address_data->probe_range[i + 1]) &&
- (addr <= address_data->probe_range[i + 2])) {
- found = 1;
- dev_dbg(&adapter->dev, "found probe_range parameter for adapter %d, addr %04x\n", adapter_id, addr);
- }
- }
- if (!found)
- continue;
-
- /* OK, so we really should examine this address. First check
- whether there is some client here at all! */
- if (is_isa ||
- (i2c_smbus_xfer (adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) >= 0))
- if ((err = found_proc(adapter, addr, -1)))
- return err;
- }
- return 0;
-}
-
-static int __init i2c_proc_init(void)
-{
- return 0;
-}
-
-static void __exit i2c_proc_exit(void)
-{
-}
-
-EXPORT_SYMBOL(i2c_detect);
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
-MODULE_DESCRIPTION("i2c-proc driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_proc_init);
-module_exit(i2c_proc_exit);
diff -Nru a/drivers/i2c/i2c-sensor.c b/drivers/i2c/i2c-sensor.c
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/drivers/i2c/i2c-sensor.c Wed Apr 2 16:00:46 2003
@@ -0,0 +1,182 @@
+/*
+ i2c-sensor.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl> and
+ Mark D. Studebaker <mdsxyz123@yahoo.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* #define DEBUG 1 */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/sysctl.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <asm/uaccess.h>
+
+
+/* Very inefficient for ISA detects, and won't work for 10-bit addresses! */
+int i2c_detect(struct i2c_adapter *adapter,
+ struct i2c_address_data *address_data,
+ i2c_found_addr_proc * found_proc)
+{
+ int addr, i, found, j, err;
+ struct i2c_force_data *this_force;
+ int is_isa = i2c_is_isa_adapter(adapter);
+ int adapter_id =
+ is_isa ? SENSORS_ISA_BUS : i2c_adapter_id(adapter);
+
+ /* Forget it if we can't probe using SMBUS_QUICK */
+ if ((!is_isa) &&
+ !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK))
+ return -1;
+
+ for (addr = 0x00; addr <= (is_isa ? 0xffff : 0x7f); addr++) {
+ /* XXX: WTF is going on here??? */
+ if ((is_isa && check_region(addr, 1)) ||
+ (!is_isa && i2c_check_addr(adapter, addr)))
+ continue;
+
+ /* If it is in one of the force entries, we don't do any
+ detection at all */
+ found = 0;
+ for (i = 0; !found && (this_force = address_data->forces + i, this_force->force); i++) {
+ for (j = 0; !found && (this_force->force[j] != SENSORS_I2C_END); j += 2) {
+ if ( ((adapter_id == this_force->force[j]) ||
+ ((this_force->force[j] == SENSORS_ANY_I2C_BUS) && !is_isa)) &&
+ (addr == this_force->force[j + 1]) ) {
+ dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n", adapter_id, addr);
+ if ((err = found_proc(adapter, addr, this_force->kind)))
+ return err;
+ found = 1;
+ }
+ }
+ }
+ if (found)
+ continue;
+
+ /* If this address is in one of the ignores, we can forget about it
+ right now */
+ for (i = 0; !found && (address_data->ignore[i] != SENSORS_I2C_END); i += 2) {
+ if ( ((adapter_id == address_data->ignore[i]) ||
+ ((address_data->ignore[i] == SENSORS_ANY_I2C_BUS) &&
+ !is_isa)) &&
+ (addr == address_data->ignore[i + 1])) {
+ dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, addr %04x\n", adapter_id, addr);
+ found = 1;
+ }
+ }
+ for (i = 0; !found && (address_data->ignore_range[i] != SENSORS_I2C_END); i += 3) {
+ if ( ((adapter_id == address_data->ignore_range[i]) ||
+ ((address_data-> ignore_range[i] == SENSORS_ANY_I2C_BUS) &
+ !is_isa)) &&
+ (addr >= address_data->ignore_range[i + 1]) &&
+ (addr <= address_data->ignore_range[i + 2])) {
+ dev_dbg(&adapter->dev, "found ignore_range parameter for adapter %d, addr %04x\n", adapter_id, addr);
+ found = 1;
+ }
+ }
+ if (found)
+ continue;
+
+ /* Now, we will do a detection, but only if it is in the normal or
+ probe entries */
+ if (is_isa) {
+ for (i = 0; !found && (address_data->normal_isa[i] != SENSORS_ISA_END); i += 1) {
+ if (addr == address_data->normal_isa[i]) {
+ dev_dbg(&adapter->dev, "found normal isa entry for adapter %d, addr %04x\n", adapter_id, addr);
+ found = 1;
+ }
+ }
+ for (i = 0; !found && (address_data->normal_isa_range[i] != SENSORS_ISA_END); i += 3) {
+ if ((addr >= address_data->normal_isa_range[i]) &&
+ (addr <= address_data->normal_isa_range[i + 1]) &&
+ ((addr - address_data->normal_isa_range[i]) % address_data->normal_isa_range[i + 2] == 0)) {
+ dev_dbg(&adapter->dev, "found normal isa_range entry for adapter %d, addr %04x", adapter_id, addr);
+ found = 1;
+ }
+ }
+ } else {
+ for (i = 0; !found && (address_data->normal_i2c[i] != SENSORS_I2C_END); i += 1) {
+ if (addr == address_data->normal_i2c[i]) {
+ found = 1;
+ dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, addr %02x", adapter_id, addr);
+ }
+ }
+ for (i = 0; !found && (address_data->normal_i2c_range[i] != SENSORS_I2C_END); i += 2) {
+ if ((addr >= address_data->normal_i2c_range[i]) &&
+ (addr <= address_data->normal_i2c_range[i + 1])) {
+ dev_dbg(&adapter->dev, "found normal i2c_range entry for adapter %d, addr %04x\n", adapter_id, addr);
+ found = 1;
+ }
+ }
+ }
+
+ for (i = 0;
+ !found && (address_data->probe[i] != SENSORS_I2C_END);
+ i += 2) {
+ if (((adapter_id == address_data->probe[i]) ||
+ ((address_data->
+ probe[i] == SENSORS_ANY_I2C_BUS) & !is_isa))
+ && (addr == address_data->probe[i + 1])) {
+ dev_dbg(&adapter->dev, "found probe parameter for adapter %d, addr %04x\n", adapter_id, addr);
+ found = 1;
+ }
+ }
+ for (i = 0; !found && (address_data->probe_range[i] != SENSORS_I2C_END); i += 3) {
+ if ( ((adapter_id == address_data->probe_range[i]) ||
+ ((address_data->probe_range[i] == SENSORS_ANY_I2C_BUS) & !is_isa)) &&
+ (addr >= address_data->probe_range[i + 1]) &&
+ (addr <= address_data->probe_range[i + 2])) {
+ found = 1;
+ dev_dbg(&adapter->dev, "found probe_range parameter for adapter %d, addr %04x\n", adapter_id, addr);
+ }
+ }
+ if (!found)
+ continue;
+
+ /* OK, so we really should examine this address. First check
+ whether there is some client here at all! */
+ if (is_isa ||
+ (i2c_smbus_xfer (adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) >= 0))
+ if ((err = found_proc(adapter, addr, -1)))
+ return err;
+ }
+ return 0;
+}
+
+static int __init i2c_sensor_init(void)
+{
+ return 0;
+}
+
+static void __exit i2c_sensor_exit(void)
+{
+}
+
+EXPORT_SYMBOL(i2c_detect);
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_DESCRIPTION("i2c-sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_sensor_init);
+module_exit(i2c_sensor_exit);
diff -Nru a/include/linux/i2c-proc.h b/include/linux/i2c-proc.h
--- a/include/linux/i2c-proc.h Wed Apr 2 16:00:46 2003
+++ /dev/null Wed Dec 31 16:00:00 1969
@@ -1,373 +0,0 @@
-/*
- i2c-proc.h - Part of the i2c package
- was originally sensors.h - Part of lm_sensors, Linux kernel modules
- for hardware monitoring
- Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _LINUX_I2C_PROC_H
-#define _LINUX_I2C_PROC_H
-
-#include <linux/sysctl.h>
-
-/* The type of callback functions used in sensors_{proc,sysctl}_real */
-typedef void (*i2c_real_callback) (struct i2c_client * client,
- int operation, int ctl_name,
- int *nrels_mag, long *results);
-
-/* Values for the operation field in the above function type */
-#define SENSORS_PROC_REAL_INFO 1
-#define SENSORS_PROC_REAL_READ 2
-#define SENSORS_PROC_REAL_WRITE 3
-
-/* A structure containing detect information.
- Force variables overrule all other variables; they force a detection on
- that place. If a specific chip is given, the module blindly assumes this
- chip type is present; if a general force (kind == 0) is given, the module
- will still try to figure out what type of chip is present. This is useful
- if for some reasons the detect for SMBus or ISA address space filled
- fails.
- probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
- A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second is the address.
- kind: The kind of chip. 0 equals any chip.
-*/
-struct i2c_force_data {
- unsigned short *force;
- unsigned short kind;
-};
-
-/* A structure containing the detect information.
- normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END.
- A list of I2C addresses which should normally be examined.
- normal_i2c_range: filled in by the module writer. Terminated by
- SENSORS_I2C_END
- A list of pairs of I2C addresses, each pair being an inclusive range of
- addresses which should normally be examined.
- normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
- A list of ISA addresses which should normally be examined.
- normal_isa_range: filled in by the module writer. Terminated by
- SENSORS_ISA_END
- A list of triples. The first two elements are ISA addresses, being an
- range of addresses which should normally be examined. The third is the
- modulo parameter: only addresses which are 0 module this value relative
- to the first address of the range are actually considered.
- probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
- A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second is the address. These
- addresses are also probed, as if they were in the 'normal' list.
- probe_range: insmod parameter. Initialize this list with SENSORS_I2C_END
- values.
- A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second and third are addresses.
- These form an inclusive range of addresses that are also probed, as
- if they were in the 'normal' list.
- ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values.
- A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second is the I2C address. These
- addresses are never probed. This parameter overrules 'normal' and
- 'probe', but not the 'force' lists.
- ignore_range: insmod parameter. Initialize this list with SENSORS_I2C_END
- values.
- A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second and third are addresses.
- These form an inclusive range of I2C addresses that are never probed.
- This parameter overrules 'normal' and 'probe', but not the 'force' lists.
- force_data: insmod parameters. A list, ending with an element of which
- the force field is NULL.
-*/
-struct i2c_address_data {
- unsigned short *normal_i2c;
- unsigned short *normal_i2c_range;
- unsigned int *normal_isa;
- unsigned int *normal_isa_range;
- unsigned short *probe;
- unsigned short *probe_range;
- unsigned short *ignore;
- unsigned short *ignore_range;
- struct i2c_force_data *forces;
-};
-
-/* Internal numbers to terminate lists */
-#define SENSORS_I2C_END 0xfffe
-#define SENSORS_ISA_END 0xfffefffe
-
-/* The numbers to use to set an ISA or I2C bus address */
-#define SENSORS_ISA_BUS 9191
-#define SENSORS_ANY_I2C_BUS 0xffff
-
-/* The length of the option lists */
-#define SENSORS_MAX_OPTS 48
-
-/* Default fill of many variables */
-#define SENSORS_DEFAULTS {SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
- SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END}
-
-/* This is ugly. We need to evaluate SENSORS_MAX_OPTS before it is
- stringified */
-#define SENSORS_MODPARM_AUX1(x) "1-" #x "h"
-#define SENSORS_MODPARM_AUX(x) SENSORS_MODPARM_AUX1(x)
-#define SENSORS_MODPARM SENSORS_MODPARM_AUX(SENSORS_MAX_OPTS)
-
-/* SENSORS_MODULE_PARM creates a module parameter, and puts it in the
- module header */
-#define SENSORS_MODULE_PARM(var,desc) \
- static unsigned short var[SENSORS_MAX_OPTS] = SENSORS_DEFAULTS; \
- MODULE_PARM(var,SENSORS_MODPARM); \
- MODULE_PARM_DESC(var,desc)
-
-/* SENSORS_MODULE_PARM creates a 'force_*' module parameter, and puts it in
- the module header */
-#define SENSORS_MODULE_PARM_FORCE(name) \
- SENSORS_MODULE_PARM(force_ ## name, \
- "List of adapter,address pairs which are unquestionably" \
- " assumed to contain a `" # name "' chip")
-
-
-/* This defines several insmod variables, and the addr_data structure */
-#define SENSORS_INSMOD \
- SENSORS_MODULE_PARM(probe, \
- "List of adapter,address pairs to scan additionally"); \
- SENSORS_MODULE_PARM(probe_range, \
- "List of adapter,start-addr,end-addr triples to scan " \
- "additionally"); \
- SENSORS_MODULE_PARM(ignore, \
- "List of adapter,address pairs not to scan"); \
- SENSORS_MODULE_PARM(ignore_range, \
- "List of adapter,start-addr,end-addr triples not to " \
- "scan"); \
- static struct i2c_address_data addr_data = \
- {normal_i2c, normal_i2c_range, \
- normal_isa, normal_isa_range, \
- probe, probe_range, \
- ignore, ignore_range, \
- forces}
-
-/* The following functions create an enum with the chip names as elements.
- The first element of the enum is any_chip. These are the only macros
- a module will want to use. */
-
-#define SENSORS_INSMOD_0 \
- enum chips { any_chip }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- static struct i2c_force_data forces[] = {{force,any_chip},{NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_1(chip1) \
- enum chips { any_chip, chip1 }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- static struct i2c_force_data forces[] = {{force,any_chip},\
- {force_ ## chip1,chip1}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_2(chip1,chip2) \
- enum chips { any_chip, chip1, chip2 }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_3(chip1,chip2,chip3) \
- enum chips { any_chip, chip1, chip2, chip3 }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_4(chip1,chip2,chip3,chip4) \
- enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_5(chip1,chip2,chip3,chip4,chip5) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {force_ ## chip5,chip5}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_6(chip1,chip2,chip3,chip4,chip5,chip6) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {force_ ## chip5,chip5}, \
- {force_ ## chip6,chip6}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_7(chip1,chip2,chip3,chip4,chip5,chip6,chip7) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7 }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- SENSORS_MODULE_PARM_FORCE(chip7); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {force_ ## chip5,chip5}, \
- {force_ ## chip6,chip6}, \
- {force_ ## chip7,chip7}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-#define SENSORS_INSMOD_8(chip1,chip2,chip3,chip4,chip5,chip6,chip7,chip8) \
- enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8 }; \
- SENSORS_MODULE_PARM(force, \
- "List of adapter,address pairs to boldly assume " \
- "to be present"); \
- SENSORS_MODULE_PARM_FORCE(chip1); \
- SENSORS_MODULE_PARM_FORCE(chip2); \
- SENSORS_MODULE_PARM_FORCE(chip3); \
- SENSORS_MODULE_PARM_FORCE(chip4); \
- SENSORS_MODULE_PARM_FORCE(chip5); \
- SENSORS_MODULE_PARM_FORCE(chip6); \
- SENSORS_MODULE_PARM_FORCE(chip7); \
- SENSORS_MODULE_PARM_FORCE(chip8); \
- static struct i2c_force_data forces[] = {{force,any_chip}, \
- {force_ ## chip1,chip1}, \
- {force_ ## chip2,chip2}, \
- {force_ ## chip3,chip3}, \
- {force_ ## chip4,chip4}, \
- {force_ ## chip5,chip5}, \
- {force_ ## chip6,chip6}, \
- {force_ ## chip7,chip7}, \
- {force_ ## chip8,chip8}, \
- {NULL}}; \
- SENSORS_INSMOD
-
-typedef int i2c_found_addr_proc(struct i2c_adapter *adapter,
- int addr, int kind);
-
-/* Detect function. It iterates over all possible addresses itself. For
- SMBus addresses, it will only call found_proc if some client is connected
- to the SMBus (unless a 'force' matched); for ISA detections, this is not
- done. */
-extern int i2c_detect(struct i2c_adapter *adapter,
- struct i2c_address_data *address_data,
- i2c_found_addr_proc * found_proc);
-
-
-/* This macro is used to scale user-input to sensible values in almost all
- chip drivers. */
-static inline int SENSORS_LIMIT(long value, long low, long high)
-{
- if (value < low)
- return low;
- else if (value > high)
- return high;
- else
- return value;
-}
-
-
-/* The maximum length of the prefix */
-#define SENSORS_PREFIX_MAX 20
-
-/* Sysctl IDs */
-#ifdef DEV_HWMON
-#define DEV_SENSORS DEV_HWMON
-#else /* ndef DEV_HWMOM */
-#define DEV_SENSORS 2 /* The id of the lm_sensors directory within the
- dev table */
-#endif /* def DEV_HWMON */
-
-#define SENSORS_CHIPS 1
-struct i2c_chips_data {
- int sysctl_id;
- char name[SENSORS_PREFIX_MAX + 13];
-};
-
-#endif /* def _LINUX_I2C_PROC_H */
-
diff -Nru a/include/linux/i2c-sensor.h b/include/linux/i2c-sensor.h
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/include/linux/i2c-sensor.h Wed Apr 2 16:00:46 2003
@@ -0,0 +1,373 @@
+/*
+ i2c-sensor.h - Part of the i2c package
+ was originally sensors.h - Part of lm_sensors, Linux kernel modules
+ for hardware monitoring
+ Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _LINUX_I2C_SENSOR_H
+#define _LINUX_I2C_SENSOR_H
+
+#include <linux/sysctl.h>
+
+/* The type of callback functions used in sensors_{proc,sysctl}_real */
+typedef void (*i2c_real_callback) (struct i2c_client * client,
+ int operation, int ctl_name,
+ int *nrels_mag, long *results);
+
+/* Values for the operation field in the above function type */
+#define SENSORS_PROC_REAL_INFO 1
+#define SENSORS_PROC_REAL_READ 2
+#define SENSORS_PROC_REAL_WRITE 3
+
+/* A structure containing detect information.
+ Force variables overrule all other variables; they force a detection on
+ that place. If a specific chip is given, the module blindly assumes this
+ chip type is present; if a general force (kind == 0) is given, the module
+ will still try to figure out what type of chip is present. This is useful
+ if for some reasons the detect for SMBus or ISA address space filled
+ fails.
+ probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
+ A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
+ the ISA bus, -1 for any I2C bus), the second is the address.
+ kind: The kind of chip. 0 equals any chip.
+*/
+struct i2c_force_data {
+ unsigned short *force;
+ unsigned short kind;
+};
+
+/* A structure containing the detect information.
+ normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END.
+ A list of I2C addresses which should normally be examined.
+ normal_i2c_range: filled in by the module writer. Terminated by
+ SENSORS_I2C_END
+ A list of pairs of I2C addresses, each pair being an inclusive range of
+ addresses which should normally be examined.
+ normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
+ A list of ISA addresses which should normally be examined.
+ normal_isa_range: filled in by the module writer. Terminated by
+ SENSORS_ISA_END
+ A list of triples. The first two elements are ISA addresses, being an
+ range of addresses which should normally be examined. The third is the
+ modulo parameter: only addresses which are 0 module this value relative
+ to the first address of the range are actually considered.
+ probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
+ A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
+ the ISA bus, -1 for any I2C bus), the second is the address. These
+ addresses are also probed, as if they were in the 'normal' list.
+ probe_range: insmod parameter. Initialize this list with SENSORS_I2C_END
+ values.
+ A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
+ the ISA bus, -1 for any I2C bus), the second and third are addresses.
+ These form an inclusive range of addresses that are also probed, as
+ if they were in the 'normal' list.
+ ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values.
+ A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
+ the ISA bus, -1 for any I2C bus), the second is the I2C address. These
+ addresses are never probed. This parameter overrules 'normal' and
+ 'probe', but not the 'force' lists.
+ ignore_range: insmod parameter. Initialize this list with SENSORS_I2C_END
+ values.
+ A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
+ the ISA bus, -1 for any I2C bus), the second and third are addresses.
+ These form an inclusive range of I2C addresses that are never probed.
+ This parameter overrules 'normal' and 'probe', but not the 'force' lists.
+ force_data: insmod parameters. A list, ending with an element of which
+ the force field is NULL.
+*/
+struct i2c_address_data {
+ unsigned short *normal_i2c;
+ unsigned short *normal_i2c_range;
+ unsigned int *normal_isa;
+ unsigned int *normal_isa_range;
+ unsigned short *probe;
+ unsigned short *probe_range;
+ unsigned short *ignore;
+ unsigned short *ignore_range;
+ struct i2c_force_data *forces;
+};
+
+/* Internal numbers to terminate lists */
+#define SENSORS_I2C_END 0xfffe
+#define SENSORS_ISA_END 0xfffefffe
+
+/* The numbers to use to set an ISA or I2C bus address */
+#define SENSORS_ISA_BUS 9191
+#define SENSORS_ANY_I2C_BUS 0xffff
+
+/* The length of the option lists */
+#define SENSORS_MAX_OPTS 48
+
+/* Default fill of many variables */
+#define SENSORS_DEFAULTS {SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
+ SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END}
+
+/* This is ugly. We need to evaluate SENSORS_MAX_OPTS before it is
+ stringified */
+#define SENSORS_MODPARM_AUX1(x) "1-" #x "h"
+#define SENSORS_MODPARM_AUX(x) SENSORS_MODPARM_AUX1(x)
+#define SENSORS_MODPARM SENSORS_MODPARM_AUX(SENSORS_MAX_OPTS)
+
+/* SENSORS_MODULE_PARM creates a module parameter, and puts it in the
+ module header */
+#define SENSORS_MODULE_PARM(var,desc) \
+ static unsigned short var[SENSORS_MAX_OPTS] = SENSORS_DEFAULTS; \
+ MODULE_PARM(var,SENSORS_MODPARM); \
+ MODULE_PARM_DESC(var,desc)
+
+/* SENSORS_MODULE_PARM creates a 'force_*' module parameter, and puts it in
+ the module header */
+#define SENSORS_MODULE_PARM_FORCE(name) \
+ SENSORS_MODULE_PARM(force_ ## name, \
+ "List of adapter,address pairs which are unquestionably" \
+ " assumed to contain a `" # name "' chip")
+
+
+/* This defines several insmod variables, and the addr_data structure */
+#define SENSORS_INSMOD \
+ SENSORS_MODULE_PARM(probe, \
+ "List of adapter,address pairs to scan additionally"); \
+ SENSORS_MODULE_PARM(probe_range, \
+ "List of adapter,start-addr,end-addr triples to scan " \
+ "additionally"); \
+ SENSORS_MODULE_PARM(ignore, \
+ "List of adapter,address pairs not to scan"); \
+ SENSORS_MODULE_PARM(ignore_range, \
+ "List of adapter,start-addr,end-addr triples not to " \
+ "scan"); \
+ static struct i2c_address_data addr_data = \
+ {normal_i2c, normal_i2c_range, \
+ normal_isa, normal_isa_range, \
+ probe, probe_range, \
+ ignore, ignore_range, \
+ forces}
+
+/* The following functions create an enum with the chip names as elements.
+ The first element of the enum is any_chip. These are the only macros
+ a module will want to use. */
+
+#define SENSORS_INSMOD_0 \
+ enum chips { any_chip }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ static struct i2c_force_data forces[] = {{force,any_chip},{NULL}}; \
+ SENSORS_INSMOD
+
+#define SENSORS_INSMOD_1(chip1) \
+ enum chips { any_chip, chip1 }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ SENSORS_MODULE_PARM_FORCE(chip1); \
+ static struct i2c_force_data forces[] = {{force,any_chip},\
+ {force_ ## chip1,chip1}, \
+ {NULL}}; \
+ SENSORS_INSMOD
+
+#define SENSORS_INSMOD_2(chip1,chip2) \
+ enum chips { any_chip, chip1, chip2 }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ SENSORS_MODULE_PARM_FORCE(chip1); \
+ SENSORS_MODULE_PARM_FORCE(chip2); \
+ static struct i2c_force_data forces[] = {{force,any_chip}, \
+ {force_ ## chip1,chip1}, \
+ {force_ ## chip2,chip2}, \
+ {NULL}}; \
+ SENSORS_INSMOD
+
+#define SENSORS_INSMOD_3(chip1,chip2,chip3) \
+ enum chips { any_chip, chip1, chip2, chip3 }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ SENSORS_MODULE_PARM_FORCE(chip1); \
+ SENSORS_MODULE_PARM_FORCE(chip2); \
+ SENSORS_MODULE_PARM_FORCE(chip3); \
+ static struct i2c_force_data forces[] = {{force,any_chip}, \
+ {force_ ## chip1,chip1}, \
+ {force_ ## chip2,chip2}, \
+ {force_ ## chip3,chip3}, \
+ {NULL}}; \
+ SENSORS_INSMOD
+
+#define SENSORS_INSMOD_4(chip1,chip2,chip3,chip4) \
+ enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ SENSORS_MODULE_PARM_FORCE(chip1); \
+ SENSORS_MODULE_PARM_FORCE(chip2); \
+ SENSORS_MODULE_PARM_FORCE(chip3); \
+ SENSORS_MODULE_PARM_FORCE(chip4); \
+ static struct i2c_force_data forces[] = {{force,any_chip}, \
+ {force_ ## chip1,chip1}, \
+ {force_ ## chip2,chip2}, \
+ {force_ ## chip3,chip3}, \
+ {force_ ## chip4,chip4}, \
+ {NULL}}; \
+ SENSORS_INSMOD
+
+#define SENSORS_INSMOD_5(chip1,chip2,chip3,chip4,chip5) \
+ enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ SENSORS_MODULE_PARM_FORCE(chip1); \
+ SENSORS_MODULE_PARM_FORCE(chip2); \
+ SENSORS_MODULE_PARM_FORCE(chip3); \
+ SENSORS_MODULE_PARM_FORCE(chip4); \
+ SENSORS_MODULE_PARM_FORCE(chip5); \
+ static struct i2c_force_data forces[] = {{force,any_chip}, \
+ {force_ ## chip1,chip1}, \
+ {force_ ## chip2,chip2}, \
+ {force_ ## chip3,chip3}, \
+ {force_ ## chip4,chip4}, \
+ {force_ ## chip5,chip5}, \
+ {NULL}}; \
+ SENSORS_INSMOD
+
+#define SENSORS_INSMOD_6(chip1,chip2,chip3,chip4,chip5,chip6) \
+ enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ SENSORS_MODULE_PARM_FORCE(chip1); \
+ SENSORS_MODULE_PARM_FORCE(chip2); \
+ SENSORS_MODULE_PARM_FORCE(chip3); \
+ SENSORS_MODULE_PARM_FORCE(chip4); \
+ SENSORS_MODULE_PARM_FORCE(chip5); \
+ SENSORS_MODULE_PARM_FORCE(chip6); \
+ static struct i2c_force_data forces[] = {{force,any_chip}, \
+ {force_ ## chip1,chip1}, \
+ {force_ ## chip2,chip2}, \
+ {force_ ## chip3,chip3}, \
+ {force_ ## chip4,chip4}, \
+ {force_ ## chip5,chip5}, \
+ {force_ ## chip6,chip6}, \
+ {NULL}}; \
+ SENSORS_INSMOD
+
+#define SENSORS_INSMOD_7(chip1,chip2,chip3,chip4,chip5,chip6,chip7) \
+ enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7 }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ SENSORS_MODULE_PARM_FORCE(chip1); \
+ SENSORS_MODULE_PARM_FORCE(chip2); \
+ SENSORS_MODULE_PARM_FORCE(chip3); \
+ SENSORS_MODULE_PARM_FORCE(chip4); \
+ SENSORS_MODULE_PARM_FORCE(chip5); \
+ SENSORS_MODULE_PARM_FORCE(chip6); \
+ SENSORS_MODULE_PARM_FORCE(chip7); \
+ static struct i2c_force_data forces[] = {{force,any_chip}, \
+ {force_ ## chip1,chip1}, \
+ {force_ ## chip2,chip2}, \
+ {force_ ## chip3,chip3}, \
+ {force_ ## chip4,chip4}, \
+ {force_ ## chip5,chip5}, \
+ {force_ ## chip6,chip6}, \
+ {force_ ## chip7,chip7}, \
+ {NULL}}; \
+ SENSORS_INSMOD
+
+#define SENSORS_INSMOD_8(chip1,chip2,chip3,chip4,chip5,chip6,chip7,chip8) \
+ enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8 }; \
+ SENSORS_MODULE_PARM(force, \
+ "List of adapter,address pairs to boldly assume " \
+ "to be present"); \
+ SENSORS_MODULE_PARM_FORCE(chip1); \
+ SENSORS_MODULE_PARM_FORCE(chip2); \
+ SENSORS_MODULE_PARM_FORCE(chip3); \
+ SENSORS_MODULE_PARM_FORCE(chip4); \
+ SENSORS_MODULE_PARM_FORCE(chip5); \
+ SENSORS_MODULE_PARM_FORCE(chip6); \
+ SENSORS_MODULE_PARM_FORCE(chip7); \
+ SENSORS_MODULE_PARM_FORCE(chip8); \
+ static struct i2c_force_data forces[] = {{force,any_chip}, \
+ {force_ ## chip1,chip1}, \
+ {force_ ## chip2,chip2}, \
+ {force_ ## chip3,chip3}, \
+ {force_ ## chip4,chip4}, \
+ {force_ ## chip5,chip5}, \
+ {force_ ## chip6,chip6}, \
+ {force_ ## chip7,chip7}, \
+ {force_ ## chip8,chip8}, \
+ {NULL}}; \
+ SENSORS_INSMOD
+
+typedef int i2c_found_addr_proc(struct i2c_adapter *adapter,
+ int addr, int kind);
+
+/* Detect function. It iterates over all possible addresses itself. For
+ SMBus addresses, it will only call found_proc if some client is connected
+ to the SMBus (unless a 'force' matched); for ISA detections, this is not
+ done. */
+extern int i2c_detect(struct i2c_adapter *adapter,
+ struct i2c_address_data *address_data,
+ i2c_found_addr_proc * found_proc);
+
+
+/* This macro is used to scale user-input to sensible values in almost all
+ chip drivers. */
+static inline int SENSORS_LIMIT(long value, long low, long high)
+{
+ if (value < low)
+ return low;
+ else if (value > high)
+ return high;
+ else
+ return value;
+}
+
+
+/* The maximum length of the prefix */
+#define SENSORS_PREFIX_MAX 20
+
+/* Sysctl IDs */
+#ifdef DEV_HWMON
+#define DEV_SENSORS DEV_HWMON
+#else /* ndef DEV_HWMOM */
+#define DEV_SENSORS 2 /* The id of the lm_sensors directory within the
+ dev table */
+#endif /* def DEV_HWMON */
+
+#define SENSORS_CHIPS 1
+struct i2c_chips_data {
+ int sysctl_id;
+ char name[SENSORS_PREFIX_MAX + 13];
+};
+
+#endif /* def _LINUX_I2C_SENSOR_H */
+