From: <someone in gentoo bugzilla>
Subject: Fix up PCI routing in parent bridge
When the cardbus bridge is behind another bridge change the routing
in the parent bridge for new cards. This fixes Cardbus on various AMD64
laptops.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/pci/probe.c | 19 ++++++++++++++++++-
1 files changed, 18 insertions(+), 1 deletion(-)
--- gregkh-2.6.orig/drivers/pci/probe.c 2005-06-09 22:36:52.000000000 -0700
+++ gregkh-2.6/drivers/pci/probe.c 2005-06-09 22:37:09.000000000 -0700
@@ -398,6 +398,16 @@
pci_write_config_word(dev, rpcap + PCI_EXP_RTCTL, rpctl);
}
+static void __devinit pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
+{
+ struct pci_bus *parent = child->parent;
+ while (parent->parent && parent->subordinate < max) {
+ parent->subordinate = max;
+ pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
+ parent = parent->parent;
+ }
+}
+
unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus);
/*
@@ -499,7 +509,13 @@
if (!is_cardbus) {
child->bridge_ctl = PCI_BRIDGE_CTL_NO_ISA;
-
+ /*
+ * Adjust subordinate busnr in parent buses.
+ * We do this before scanning for children because
+ * some devices may not be detected if the bios
+ * was lazy.
+ */
+ pci_fixup_parent_subordinate_busnr(child, max);
/* Now we can scan all subordinate buses... */
max = pci_scan_child_bus(child);
} else {
@@ -513,6 +529,7 @@
max+i+1))
break;
max += i;
+ pci_fixup_parent_subordinate_busnr(child, max);
}
/*
* Set the subordinate bus number to its real value.